UPES B.Tech Admissions 2025
Ranked #42 among Engineering colleges in India by NIRF | Highest Package 1.3 CR , 100% Placements | Last Date to Apply: 15th May
How To Get BTech Admission through Management Quota in India - Engineering aspirants who wish to gain admission to good colleges without the merit of entrance exams can opt for management quota admissions. The management quota B.Tech admissions are not dependent on the candidate's scores in the engineering entrance exam. Direct admission to several engineering colleges is possible through B.Tech management quota. Careers360 has prepared a list of colleges that offer BTech admission through management quota. In this article, we discuss how to get BTech admission in management quota or institutional quota. Students must note that the management quota admissions cost more than the regular admissions.
Most state counselling processes and deemed universities allow a percentage of seats to be reserved as management quota. These are essentially payment seats and the cost of admission as well as the fee is higher than regular seats. States like Andhra, and Telangana offer admission to B.Tech courses to as many as 35% of the seats in the private engineering colleges in the state. In other states, it may be up to 15%. Some states offer a separate B.Tech counselling for the management quota while many club it with the regular one.
Candidates who have not appeared for any entrance exam or have secured low scores in entrance exams can apply for the direct B.Tech admissions through management quota. The other avenue for direct B.Tech admissions is the institutional quota which is offered through the spot rounds of most counselling processes. Another pathway is to approach the college or institute for admission.
Ranked #42 among Engineering colleges in India by NIRF | Highest Package 1.3 CR , 100% Placements | Last Date to Apply: 15th May
Merit Scholarships | NAAC A+ Accredited | Top Recruiters : E&Y, CYENT, Nvidia, CISCO, Genpact, Amazon & many more
APSCHE oversees admissions to 30% of management quota seats in Andhra Pradesh. Candidates can apply based on their AP EAMCET, JEE Main scores or Intermediate or equivalent marks. The management quota admissions fall under category B admissions. Candidates need to register, select their entry mode (AP EAPCET/ JEE/ Class 12) and pay the fee as given below. They need to enter their choice of colleges and courses. Based on their merit, they will be allotted seats accordingly. Next, candidates have to report to the college and complete their admission formalities.
AP BTech Admission (Category B) | Registration Fee |
EAPCET - CAT B NRI (PIO/FN/CWG) | Rs. 5000 |
EAPCET - CAT B NON-NRI EAPCET/JEE Qualified | Rs. 2500 |
EAPCET - CAT B NON NRI APCET/JEE Not appeared/qualified | Rs. 3500 |
Recognized as Institute of Eminence by Govt. of India | NAAC ‘A++’ Grade | Upto 75% Scholarships | Applications accepted on through JEE
100% Placement Record | Highest CTC 54 LPA | NAAC A++ Accredited | Ranked #65 in India by NIRF Ranking 2024 | JEE & JET Scores Accepted | Last date to Apply: 15th May
Candidates can below check the list of top private engineering colleges in Andhra Pradesh.
TSCHE conducts Management quota admissions for BTech courses in Telangana. Admissions to 30 percent B.Tech management quota (Category B) seats in the non-minority/minority private unaided engineering colleges of Telangana are through JEE Main, TSEAMCET or class 12 marks. The first preference would be for JEE Main candidates followed by TS EAMCET and then class 12.
Candidates can below check the list of top private engineering colleges in Telangana.
Admission Committee for Professional Courses (ACPC) allows for admissions to 50% of seats in unaided Colleges of Gujarat. These seats come under the management quota and are open to students who have appeared for JEE Main or GUJCET. Such students must also meet the minimum eligibility criteria as prescribed by the authorities. Candidates will have to make a list of the institutes they would prefer to apply to and then fill out the applications on the respective institute’s website for admissions under the management quota. Students are below provided with the list of top private engineering colleges in Gujarat.
S. No. | Institutes |
1 | |
2 | |
3 | |
4 | |
5 | DAIICT Gandhinagar - Dhirubhai Ambani Institute of Information and Communication Technology |
6 | |
7 | |
8 | |
9 | Darshan Institute of Engineering and Technology, Rajkot |
To check the complete list of colleges offering B.Tech management quota in Gujarat
In UP, 15% of the seats in private institutions come under the Management/ NRI quota at the institute level. These seats will be filled at the institutional level and candidates need to apply directly to the institutes they are interested in. Preference will be given to students with JEE Main scores followed by the applicants applying based on their class 12 marks. The counselling and admissions will be held within 15 days from the completion of the state-level counselling. Students willing to get BTech admission through management quota can check the list of engineering colleges in UP.
S. No | Institutes |
1 | |
2 | |
3 | |
4 | |
5 | |
6 | |
7 | |
8 | |
9 | |
10 | |
11 | |
12 | |
13 | |
14 | |
15 | |
16 | |
17 |
Students can apply for 25% of seats (including 15% seats for children/ wards of NRIs) under the management quota in private engineering colleges of Haryana. Candidates can apply based on their JEE Main scores or class 12 marks. Applications are to be filled individually for each college they wish to apply to and the process will be outlined on the respective websites of each college/ institute. Aspirants can below check the list of engineering colleges in Haryana offering Management quota admission.
S. No | Institutes |
1 | |
2 | |
3 | |
4 | |
5 | |
6 | |
7 | MMU Mullana - Maharishi Markandeshwar Deemed to be a University |
8 | |
9 |
The Government of Punjab has approved 33-1/3 percent (one third) of total seats as management quota in all the Private Unaided Colleges / Institutions. Candidates can apply directly for the BTech seats in Punjab as per the guidelines mentioned in the respective institutions. Candidates can apply based on JEE Main as well as class 12 marks. Some of the engineering colleges in Punjab offering Management quota are as follows:
DTE Madhya Pradesh allows for 10% of seats as management quota seats and the admission process for these seats starts after completion of the state common counselling. Candidates wishing to apply for the management quota B. Tech seats in MP should pay a non-refundable fee of Rs 2500 and register online at the official website. They should upload their documents for verification and if allotted a seat report to the institute for completion of the admission formalities. Preference is given to JEE Main score followed by class 12 marks. Below is the list of engineering colleges in MP offering Management quota.
S. No | Institutes |
1 | |
2 | |
3 | |
4 | |
5 | |
6 | |
7 | |
8 | GGITS Jabalpur - Gyan Ganga Institute of Technology and Sciences |
9 | |
10 |
B.Tech admissions in West Bengal are through WBJEE. Around 10% of the seats in private and unaided institutes in the state are offered under institutional quota. Admissions are based on JEE Main or WBJEE scores. To apply for these seats, candidates are required to fill the application forms directly on the institute’s website and report to the college to complete the admission formalities. Candidates can below check some of the top private engineering colleges in West Bengal.
Management quota seat admissions are open after the conclusion of the CAP rounds. Admissions to 15% of seats in private engineering colleges of Maharashtra will be through the JEE Main or MHT CET. Vacant seats thereafter will be filled on the basis of class 12. Institutes with vacant seats will advertise for the same. Candidates have to apply to the institutes they are interested in, report for verification and fee payment after allotment.
The state quota seats (50%) are filled via the TNEA counselling. The remaining 50% seats are filled through management quota directly by the private engineering colleges in Tamil Nadu. Candidates need to fill out the direct application forms available on the respective institute’s websites. Admissions are based on class 12 marks.
Commissioner for Entrance Examinations, Govt. of Kerala conducts the state counselling for 50% of the seats in the state’s private colleges. The remaining 50% of seats will be filled under the management quota out of which 15% will be reserved for NRI applicants. Candidates are required to apply directly to the colleges for the B.Tech management quota seats in Kerala. Some of the top private engineering colleges in Kerala are mentioned below.
Admissions to B.Tech management quota seats are directly through the college. Since private colleges in Karnataka have a seat-sharing scheme with the KEA and COMEDK, a limited number of seats are available under the management quota. Candidates must apply directly on the institute’s website for admission to these seats. The admissions are based on either JEE Main, KCET or class 12 marks. Aspirants seeking B.Tech Management quota admissions can check the list of private engineering colleges in Karnataka from the table below.
S. No | Institutes |
1 | |
2 | |
3 | |
4 | |
5 | |
6 | |
7 | |
8 | |
9 | |
10 |
Admissions to the UK B.Tech Management quota are direct. Candidates need to fill out the applications on the websites of the respective institutes and avail admissions. Once allotted a seat, they have to report to the college and complete their admission formalities. Aspirants are advised to check the official websites of the private engineering colleges in Uttarakhand to get detailed information.
S. No | Institutes |
1 | |
2 | |
3 | |
4 | |
5 | |
6 | |
7 | |
8 | GBPEC Pauri-Garhwal - Govind Ballabh Pant Institute of Engineering and Technology |
9 | |
10 |
Private and self-financing engineering colleges in Rajasthan offer admissions to the B.Tech management quota seats based on class 12 marks or JEE Main scores. Students are required to contact the institutes directly for admissions or apply through the respective websites. Check the list of some of the private engineering colleges in Rajasthan below.
Upto 15% of the sanctioned intake in the private institutes of Himachal Pradesh are under the management quota. Admissions are on the basis of JEE Main, HPCET and 10+2. Candidates need to apply to the institutes they wish to study in by visiting their official websites and completing the admission formalities. Some of the top private engineering colleges in HP are mentioned in the table below.
There is a high demand for B.Tech admissions to top engineering colleges in India. However, candidates must meet the eligibility criteria set down for the same. Since this varies from university to university, state to state and even at the college level, it is advisable for students to check the college website before applying for admission. Below are some of the common eligibility criteria followed by most colleges and universities: -
For admissions, document verification is mandatory. The list of documents given below can be taken as a checklist while taking admissions to the top engineering colleges in India.
Students who want to study engineering at one of India's top universities must first pass a state or national admission exam. Several engineering colleges in India may be found in the cities listed below:
Many colleges are providing BTech admission under the management quota. Candidates need to check the fee structure for the management quota from the respective websites. The management quota fee for many states is regulated by the state fee regulatory committees. However, deemed to be universities and autonomous college institutes will have their fee structure.
Engineering is a popular course in India. Most of the top engineering institutes give admission based on entrance exam marks or rank. There are some national-level entrance exams and various institutional-level exams. They include JEE Main, JEE Advanced, BITSAT, SRMJEE, VITEEE, MET, KCET, MHCET, WBJEE, and various others. Many students do not score enough marks or rank to get admission to top colleges. Some students are not able to give admission due to various reasons. Such students have other options too. Some colleges and universities offer direct engineering admission. They are mostly private institutes. They give admission based on class 12th marks. Some colleges also have NRI and management quota seats. But they only have 25-30% of seats reserved for such admissions. The student doesn’t need entrance exam scores to take admission to such colleges.
MIT, Manipal, SRM, Chennai, DSCE Bangalore, VIT Vellore are some of the best private colleges in India.
Students should pay on an average 10 -20 lakhs in India, to secure a management seat in engineering.
VIT Vellore, SRM University, BITS Pilani, Amity University Noida are some of the private Universities with a NIRF rank.
Aerospace engineering, Machine learning and artificial intelligence, Robotics engineering, and biochemical are some of the new streams of engineering for B. Tech aspirants in India.
Amazon, Microsoft, Infosys, Wipro, and HCL are some of the famous recruiters that visit private B. Tech colleges in India.
With a CRL rank of 387111 and an OBC-NCL rank of 138827, and a 74.07 percentile in JEE Main 2025, you have a good chance of getting into a government engineering college in the Northeast, particularly considering the OBC-NCL category. However, the specific colleges you might be admitted to will depend on your branch preferences and the seat availability in each college.
Utilize online JEE college predictor to get a better idea of your admission chances.
With a JEE Main rank of 160,000 and being a general category candidate from Odisha, it's unlikely that you'll get Electrical Engineering (EE) at OUTR Bhubaneswar or Electrical and Electronics Engineering (EEE) at IIIT Bhubaneswar. These branches are generally competitive and prefer candidates with better ranks, especially for the general category.
Here's why:
OUTR Bhubaneswar: Electrical Engineering (EE) is a popular branch and typically attracts candidates with high ranks. Your rank is relatively lower, so securing a seat might be difficult.
Alternatives and Considerations:
Lower-Ranked Branches:
You might be able to secure a seat in a less competitive branch at OUTR Bhubaneswar or IIIT Bhubaneswar.
State Quota vs. All India Quota:
You have the benefit of being an Odisha state domicile, which can give you an advantage through the state quota. However, the all-India quota is still highly competitive, and your rank might not be enough for the top branches.
Counselling and JoSAA/CSAB:
Attend JoSAA/CSAB counselling and carefully choose your college and branch options based on your rank and the cutoff ranks of previous years.
Other Colleges:
Use JEE predictor tool and Explore other state engineering colleges or IITs (if your JEE Main score allows) that are less competitive for your desired branch.Consider other Engineering Colleges You can also explore other engineering colleges in Odisha or nearby states.
Important Note: The actual chances of getting your desired branch depend on the final cutoff ranks of OUTR and IIIT Bhubaneswar for the 2025 admissions. The cutoff ranks can fluctuate based on the number of applicants, the performance of students, and the seat availability.
With a CRL rank of 78211 and an OBC category rank of 24311 outside Delhi, it's unlikely you'll get into a highly sought-after branch like Computer Science, Information Technology, or Software Engineering at Delhi Technological University (DTU). However, you might have a chance for other branches like Electrical Engineering (EE) or Electronics and Communication Engineering (ECE).
Here's a more detailed breakdown:
Cutoff Ranks:
The closing ranks for popular branches like CSE, IT, and SE at DTU for OBC category candidates outside Delhi are generally lower than your overall rank.
Other Branches:
If you're willing to consider less competitive branches like EE or ECE, there's a higher chance of getting a seat, especially if you're willing to participate in the later rounds of the Joint Admission Council (JAC) Delhi counseling.
Factors to Consider:
The actual chances of getting a seat will depend on the specific branch you're targeting, the number of available seats in that branch, and the overall number of candidates with similar or better ranks.
JAC Delhi Counseling:
Admission to DTU and other participating institutions in Delhi is through JAC Delhi counseling, which uses your JEE Main rank and category for seat allocation.
Staying Informed:
Keep a close eye on the official JAC Delhi website for the most up-to-date information on cutoff ranks and the counseling process.
Recommendation:
While getting a seat in the most popular branches may be challenging, explore other engineering disciplines within DTU that align with your interests. Check the cutoff ranks for different branches from previous years and the JAC Delhi website for a more informed decision.
Also, you can use JEE predictor tool to explore other colleges
Hii,
To get into a BTech in Artificial Intelligence (AI) at elite universities like NITs or IIITs via JEE Main, general category students must get 95 percentile or higher. For reserved categories, an 80+ percentile may suffice. The exact percentile varies by college, branch, and year.
For example, NIT Surathkal's AI cutoff was approximately 2836 (upper 1-2% percentile). Check the previous cutoffs and aim high to secure a seat in AI.
With a JEE Main rank of 108,000 and being from Rohtak, Haryana, here are some options for you:
Top Colleges in Haryana:
1. DCRUST, Murthal – Good for various B.Tech programs.
2. YMCA University, Faridabad – Known for placements and infrastructure.
3. GJUST, Hisar – Offers B.Tech in multiple streams.
4. Private Colleges:
Manav Rachna University, Faridabad
Amity University, Gurugram
The NorthCap University, Gurugram
A flight attendant is a professional whose primary duty is to ensure the safety and comfort of passengers during an airline flight. An individual who is pursuing a career as a flight attendant is part of the cabin crew for the plane, a team of personnel who operate a commercial, business, or even military aircraft while travelling domestically or internationally.
An individual pursuing a career as a flight attendant is specially trained for the aircraft in which he or she works since passenger safety is their foremost concern. In this article, we will discuss how to become a flight attendant in India or how to become a flight attendant after graduation.
An aerospace engineer designs, develops, tests, and maintains aircraft, spacecraft, and related systems. They apply physics and engineering principles to improve aerospace technologies, often working in aviation, defence, or space sectors. Key tasks include designing components, conducting tests, and performing research. A bachelor’s degree is essential, with higher roles requiring advanced study. The role demands analytical skills, technical knowledge, precision, and effective communication.
A career in the aviation industry always sounds exciting. But, there is no scope for the slightest error as it may cost the lives of many people. A Flight Engineer role comes with the responsibility of monitoring the aircraft engine and control systems while in flight. Whenever the aircraft is away from the home station, he or she is required to perform pre-flight and post-flight inspections
An Aircrew Officer operates and navigates aircraft, ensuring safe flights and compliance with aviation regulations. Key duties include managing flight systems, conducting pre- and post-flight checks, and adhering to safety standards. The role typically requires working five days a week, with around 120 flight hours monthly. Employment may be contractual or permanent, depending on the airline.
An air hostess, or flight attendant, ensures passenger safety and comfort during flights. Responsibilities include safety demonstrations, serving meals, managing the cabin, handling emergencies, and post-flight reporting. The role demands strong communication skills, a calm demeanour, and a service-oriented attitude. It offers opportunities to travel and work in the dynamic aviation and hospitality industry.
An aeronautical engineer designs, develops, tests, and maintains aircraft and related systems. They work on components like engines and wings, ensuring performance, safety, and efficiency. The role involves simulations, flight testing, research, and technological innovation to improve fuel efficiency and reduce noise. Aeronautical engineers collaborate with teams in aerospace companies, government agencies, or research institutions, requiring strong skills in physics, mathematics, and engineering principles.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
An airline pilot operates aircraft to transport passengers and cargo safely. Responsibilities include pre-flight planning, in-flight operations, team collaboration, and post-flight duties. Pilots work in varying schedules and environments, often with overnight layovers. The demand for airline pilots is expected to grow, driven by retirements and industry expansion. The role requires specialized training and adaptability.
Welding Engineer Job Description: A Welding Engineer work involves managing welding projects and supervising welding teams. He or she is responsible for reviewing welding procedures, processes and documentation. A career as Welding Engineer involves conducting failure analyses and causes on welding issues.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
Individuals who opt for a career as an environmental engineer are construction professionals who utilise the skills and knowledge of biology, soil science, chemistry and the concept of engineering to design and develop projects that serve as solutions to various environmental problems.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
A Conservation Architect is a professional responsible for conserving and restoring buildings or monuments having a historic value. He or she applies techniques to document and stabilise the object’s state without any further damage. A Conservation Architect restores the monuments and heritage buildings to bring them back to their original state.
A Structural Engineer designs buildings, bridges, and other related structures. He or she analyzes the structures and makes sure the structures are strong enough to be used by the people. A career as a Structural Engineer requires working in the construction process. It comes under the civil engineering discipline. A Structure Engineer creates structural models with the help of computer-aided design software.
Highway Engineer Job Description: A Highway Engineer is a civil engineer who specialises in planning and building thousands of miles of roads that support connectivity and allow transportation across the country. He or she ensures that traffic management schemes are effectively planned concerning economic sustainability and successful implementation.
Are you searching for a Field Surveyor Job Description? A Field Surveyor is a professional responsible for conducting field surveys for various places or geographical conditions. He or she collects the required data and information as per the instructions given by senior officials.
Individuals who opt for a career as geothermal engineers are the professionals involved in the processing of geothermal energy. The responsibilities of geothermal engineers may vary depending on the workplace location. Those who work in fields design facilities to process and distribute geothermal energy. They oversee the functioning of machinery used in the field.
A geologist attempts to comprehend the historical backdrop of the planet we live on, all the more likely to anticipate the future and clarify current events. He or she analyses the components, deployments, results, physical characteristics, and past of the planet. A geologist examines the landforms and landscapes of the earth in relation to the geology, climatic, and human processes that have shaped them.
A geologist studies earth procedures, for example, seismic tremors, avalanches, floods, and volcanic eruptions to review land and draw up safe structure plans. When he or she researches earth materials, explores metals and minerals, yet in addition search for oil, petroleum gas, water, and strategies to extricate these.
Energy efficiency engineering is a broad field of engineering which deals with energy efficiency, energy services, facility management, plant engineering, and sustainable energy resources. Energy efficiency engineering is one of the most recent engineering disciplines to emerge. The field combines the knowledge and understanding of physics, chemistry, and mathematics, with economic and environmental engineering practices. The main job of individuals who opt for a career as an energy performance engineer is to find the most efficient and sustainable path to operate buildings and manufacturing processes.
Individuals who opt for a career as energy performance engineers apply their understanding and knowledge to increase efficiency and further develop renewable sources of energy. The energy efficiency engineers also examine the use of energy in those procedures and suggest the ways in which systems can be improved.
A career as a Petroleum engineer is concerned with activities related to producing petroleum. These products can be in the form of either crude oil or natural gas. Petroleum engineering also requires the exploration and refinement of petroleum resources. Therefore, a career as a petroleum engineer comes up with oil and gas onshore jobs. There are also desk jobs in the petroleum industry. In layman’s terms, a petroleum engineer is a person who finds the best way to drill and extract oil from oil wells. Individuals who opt for a career as petroleum engineer also tries to find new ways to extract oil in an efficient manner.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
A career as a civil engineer is of great importance for the infrastructural growth of the country. It is one of the most popular professions and there is great professional as well as personal growth in this civil engineering career path. There is job satisfaction in this civil engineering career path, but it also comes with a lot of stress, as there are multiple projects that need to be handled and have to be completed on time. Students should pursue physics, chemistry and mathematics in their 10+2 to become civil engineers.
A career as a Transportation Engineer is someone who takes care of people's safety. He or she is responsible for designing, planning and constructing a safe and secure transportation system. The transportation sector has seen a huge transformation and is growing day by day and improving every day.
As a Transport Engineer, he or she needs to solve complex problems such as accidents, costs, traffic flow, and statistics. A Transport Engineer also collaborates for projects with some other companies.
A loco pilot or locomotive pilot is a professional responsible for operating trains. He or she starts, stops, or controls the speed of the train. A locomotive pilot ensures that the train operates according to time schedules and signals. These loco pilots are responsible for carrying people and products to distinct destinations.
A loco pilot has thorough knowledge and understanding of the railway operations, rules, regulations, protocols, and measures to take in times of emergency. Their role is crucial in ensuring passenger and freight trains' smooth and safe operation. Here, in this article, we will discuss everything on how to how to become a loco pilot.
Among Top 30 National Universities for Engineering (NIRF 2024) | 30+ Specializations | AI Powered Learning & State-of-the-Art Facilities
NAAC A+ Grade | Among top 100 universities of India (NIRF 2024)
Ranked #1 Among all Private Indian Universities in QS Asia Rankings 2025 | Scholarships worth 210 CR
Ranked 10th among Emerging Engineering Institutes in India by Times
Ranked #42 among Engineering colleges in India by NIRF | Highest Package 1.3 CR , 100% Placements | Last Date to Apply: 15th May
Dive into everything you need to know about IITs—from eligibility and cutoffs to fees and placements.