VIT Bhopal University | M.Tech Admissions 2025
M.Tech admissions open @ VIT Bhopal University | Highest CTC 52 LPA | Apply now
IIT Patna GATE Cutoff 2025: The Indian Institute of Technology Patna will release the GATE 2025 cutoff for M.Tech program on the official website, iitp.ac.in. Candidates can check the cutoff to know the minimum GATE score for admission to various M.Tech programmes at IIT Patna. The cutoff represents the closing score for admission into specific disciplines. Higher GATE scores, the higher the chance of admission to the IIT Patna M.Tech programme. The GATE 2025 cutoff will vary across various disciplines and categories. IIT Patna M.Tech cutoff will be determined based on factors such as the number of applicants, availability of seats, and program demand. Admission to IIT Patna M.Tech courses is only through GATE.
New: GATE PYQ's
Latest: GATE 2025 College Predictor
Online MBA: Guide | Top Online MBA Universities India | Online MBA at IIMs
IIT Patna considers the score of GATE for M.Tech programme admission. Candidates can check the GATE result to know the scores and qualifying marks. Candidates have to secure a score above the GATE cutoff 2025 for IIT Patna to be considered for admission. Aspiring students need to fill out the IIT Patna application form and register for the GATE Common Offer Acceptance Portal. Students who fill out the GATE 2025 form and obtain a score above IIT Patna GATE cutoff 2025 are shortlisted based on their GATE score.
The institute will soon release the IIT Patna GATE cutoff 2025 online. In the meantime, candidates can refer to the expected cutoff based on trends from previous years to estimate the required scores for M.Tech admissions.
Indian Institute of Technology, Patna admits students based on GATE score 2025. Students have to secure the IIT Patna GATE 2025 cutoff to be considered for admission. Aspirants need to fill out the application form for IIT Patna and also register for COAP. Students will be shortlisted based on their score according to the IIT Patna GATE cutoff 2025. The list of shortlisted candidates is released through COAP and the institute portal.
Candidates seeking the IIT Patna GATE 2025 cutoff can refer to the previous year's cutoffs provided in the table below.
Branch | Gen | EWS | OBC | SC | ST | GEN-PWD | OBC-PWD |
---|---|---|---|---|---|---|---|
Advanced Manufacturing Technology | 253 | 355 | 363 | 249 | 243 | 0 | 0 |
Artificial Intelligence | 664 | 620 | 628 | 436 | 344 | 236 | 0 |
Chemical Engineering | 277 | 0 | 0 | 202 | 0 | 0 | 0 |
Civil Engineering | 412 | 392 | 463 | 326 | 308 | 293 | 297 |
Communication Systems and Signal Processing | 305 | 360 | 434 | 310 | 246 | 0 | 0 |
Computer Science and Engineering | 668 | 650 | 643 | 459 | 378 | 0 | 0 |
Geotecnical Engineering | 410 | 491 | 422 | 337 | 312 | 0 | 0 |
Materials Science and Engineering | 222 | 304 | 371 | 243 | 0 | 437 | 0 |
Mathematics & Computing | 525 | 489 | 501 | 407 | 300 | 342 | 0 |
Mechanical Design | 465 | 404 | 392 | 322 | 253 | 0 | 0 |
Mechatronics | 496 | 520 | 375 | 302 | 250 | 0 | 367 |
Power and Control System Engineering | 358 | 459 | 426 | 371 | 240 | 0 | 0 |
Structural Engineering | 428 | 462 | 443 | 370 | 0 | 0 | 0 |
Thermal & Fluids Engineering | 328 | 388 | 416 | 269 | 277 | 0 | 0 |
Vlsi and Embedded Systems | 539 | 615 | 578 | 395 | 314 | 0 | 0 |
Computer Science & Engineering | |||||
GATE Cutoff score | |||||
1 | General | 654 | |||
2 | OBC NCL | 596 | |||
3 | EWS | 642 | |||
4 | SC | 427 | |||
5 | ST | 255 | |||
6 | PwD | 339 |
Mechanical Engineering | ||||||
Cut off GATE score | ||||||
1 | General | 640 | ||||
2 | OBC NCL | 583 | ||||
3 | EWS | 552 | ||||
4 | SC | 360 | ||||
5 | ST | 237 | ||||
6 | PwD | 345 |
Materials Science & Engineering | |||||||
Cut off GATE Rank | |||||||
1 | General | ≥2700 | |||||
2 | OBC NCL | ≥8800 | |||||
3 | EWS | ≥6255 | |||||
4 | SC | ≥14852 | |||||
5 | ST | ≥28890 | |||||
6 | PwD | ≥5000 |
VLSI & Embedded Systems | ||||
Cut off GATE score | ||||
1 | General | 641 | ||
2 | OBC NCL | 622 | ||
3 | EWS | 669 | ||
4 | SC | 412 | ||
5 | ST | 300 | ||
6 | PwD | NA |
Mechatronics | |||||
Cut off GATE score | |||||
1 | General | 667 | |||
2 | OBC NCL | 661 | |||
3 | EWS | 673 | |||
4 | SC | 468 | |||
5 | ST | 297 | |||
6 | PwD | 354 |
Branch Name | Category | Closing Rank |
Civil Engineering | General | 611 |
EWS | 630 | |
OBC | 601 | |
SC | 443 | |
ST | 359 | |
Computer Science Engineering | General | 678 |
EWS | 709 | |
OBC | 608 | |
SC | 507 | |
ST | 352 | |
Electronics and Communication Engineering | General | 726 |
EWS | 724 | |
OBC | 669 | |
SC | 520 | |
ST | 316 | |
Materials Science and Technology | General | 610 |
EWS | 350 | |
OBC | 618 | |
SC | 270 | |
ST | - | |
Mathematics and Computing | General | 612 |
EWS | 674 | |
OBC | 588 | |
SC | 426 | |
ST | 329 | |
Mechanical Engineering | General | 663 |
EWS | 655 | |
OBC | 659 | |
SC | 432 | |
ST | 297 | |
Mechatronics Engineering | General | 728 |
EWS | 666 | |
OBC | 634 | |
SC | 457 | |
ST | - |
Students can find below IIT Patna GATE cutoff 2019
M.Tech Course | GATE Paper | Gen | OBC | SC | ST | PD |
Civil & Infrastructure Engineering | CE | 450 | 420 | 350 | 250 | 420 |
Communication System Engineering | EC | 542 | 542 | 296 | 296 | -- |
Computer Science Engineering | CS | |||||
Mathematics & Computing | EC | |||||
CS | ||||||
AE | ||||||
MA | ||||||
IN | ||||||
ME | ||||||
Materials Science & Engineering | XE | 300 | 300 | 200 | 200 | 200 |
ME | 460 | 460 | 230 | 230 | 230 | |
EC | 660 | 660 | 470 | 470 | 470 | |
CH | 350 | 350 | 250 | 250 | 250 | |
MT | 275 | 275 | 170 | 170 | 170 | |
EE | 590 | 590 | 300 | 300 | 300 | |
Mechanical Engineering | ME | |||||
Mechatronics | IN | 628 | 526 | 352 | - | - |
ME | 628 | 526 | 352 | - | - | |
EC | 628 | 526 | 352 | - | - | |
AE | 628 | 526 | 352 | - | - | |
PI | 628 | 526 | 352 | - | - | |
XE | 628 | 526 | 352 | - | - | |
EE | 628 | 526 | 352 | - | - | |
PH | 628 | 526 | 352 | - | - | |
Nano Science & Technology | EE | |||||
EC | ||||||
XE | ||||||
ME | ||||||
PH | ||||||
VLSI & Embedded Systems | EC | 634 | 588 | 403 | 273 | 553 |
Program | GATE paper | General | BC | SC | ST |
Civil & Infrastructure Engineering | 591 | 650 | 389 | ||
Communication System Engineering | EC | 471 | 506 | 276 | |
CS | 648 | 596 | 410 | 334 | |
Mathematics & Computing | EC | 582 | |||
CS | 568 | 548 | 358 | 263 | |
MA | 459 | ||||
Materials Science & Engineering | ME | 578 | |||
XE | 669 | 306 | 213 | ||
MT | 582 | ||||
Mechanical Engineering | ME | 711 | 700 | ||
Mechatronics | ME | 647 | 604 | 419 | 330 |
Nano Science & Technology | EC | 425 | 385 | ||
PH | 409 | 305 | 193 | ||
ME | 370 | 483 | 376 | ||
VLSI and Embedded System | EC | 632 | 586 | 410 | |
EE | 632 | 576 | |||
IN | 613 |
Course | GATE Paper | Category | GATE Marks | GATE Scores | GATE Rank |
Civil and Infrastructure Engineering | CE | General | 34.85 | 622 | 1878 |
SC | 25.03 | 423 | 10771 | ||
Communication System Engineering | EC | General | 28.73 | 543 | 4205 |
OBC | 27.84 | 534 | 4502 | ||
SC | 20.92 | 411 | 10614 | ||
Computer Science & Engineering | CS | General | 35.9 | 644 | 1233 |
OBC | 31.73 | 578 | 2224 | ||
SC | 19.66 | 385 | 9430 | ||
ST | 21.75 | 418 | 7304 | ||
Mathematics & Computing | EC | General | 29.16 | 558 | 3740 |
OBC | 26.88 | 517 | 5108 | ||
SC | 12.12 | 254 | 31186 | ||
CS | General | 27.2 | 505 | 3850 | |
OBC | 23.56 | 447 | 5912 | ||
MA | General | 17.5 | 350 | 556 | |
OBC | 18.2 | 374 | 443 | ||
Materials Science and Engineering | XE | General | 24.54 | 419 | 300 |
ME | General | 38.08 | 574 | 8395 | |
PI | General | 35.51 | 581 | 132 | |
MT | OBC | 26.41 | 330 | 646 | |
ME | SC | 20.65 | 348 | 27889 | |
Mechanical Engineering | ME | General | 45.97 | 691 | 3268 |
OBC | 45.49 | 683 | 3544 | ||
SC | 33.3 | 504 | 12806 | ||
Mechatronics | EC | General | 30.98 | 590 | 2874 |
SC | 15.97 | 323 | 19134 | ||
IE | General | 44.35 | 667 | 264 | |
ME | OBC | 39.9 | 601 | 6946 | |
SC | 18.44 | 284 | 37618 | ||
ST | 20.58 | 347 | 28083 | ||
EE | OBC | 31.32 | 594 | 3077 | |
Nano Science & Technology | ME | General | 32.12 | 486 | 14062 |
OBC | 37.38 | 564 | 8925 | ||
EE | SC | 22.4 | 436 | 9923 | |
VLSI & Embedded System | EC | General | 33.2 | 629 | 2072 |
EE | General | 30.65 | 582 | 3396 | |
CS | OBC | 36.12 | 648 | 1187 |
Course | GATE Paper | Category | GATE Marks | GATE Score | GATE Rank |
CE | General | 42.01 | 537 | 3770 to 3779 | |
OBC NCL | 37.38 | 480 | 5458 | ||
SC | 34.3 | 452 | 6977 | ||
Communication System Engineering | EC | General | 51.88 | 695 | 908 |
OBC NCL | 40 84 | 553 | 3608 | ||
OBC NCL >-PD | 25 83 | 361 | 17730 | ||
ST | 73.46 | 330 | 23100 | ||
SC | 28.32 | 393 | 13737 | ||
Computer Science and Engineering | CS | General | 48.96 | 619 | 1462 |
General – PD | 20.77 | 303 | 18254 | ||
OBC NCL | 40 | 524 | 1283 | ||
SC | 35.92 | 472 | 4880 | ||
XE: Sections Material Science (C)Thermodynamics (E) | General | 29.33 | 387 | 346 | |
ME | General | 58.26 | 642 | 4089 | |
OBC NCL | 62.79 | 688 | 2635 | ||
SC | 36.54 | 420 | 18088 | ||
MT | OBC NCL | 37.67 | 274 | 888 | |
CH | SC | 26.67 | 265 | 4095 | |
Mathematics and Computing | EC | General | 42.28 | 572 | 3034 |
OBC NLC | 29.76 | 411 | 11710 | ||
CS | General | 37.71 | 493 | 4193 | |
OBC NLC | 44.61 | 570 | 2241 | ||
SC | 29.57 | 401 | 8436 | ||
Mechanical Engineering | ME | General | 59.06 | 656 | 3590 |
OBC NLC | 61.34 | 873 | 3019 | ||
SC | 42.51 | 481 | 12942 | ||
IN | General | 55.33 | 653 | 286 | |
OBC NLC | 44.67 | 517 | 819 | ||
ME | General | 57.21 | 631 | 4551 | |
OBC NLC | 44.35 | 500 | 11688 | ||
EE | OBC NLC | 45 99 | 588 | 3180 | |
SC | 32 88 | 436 | 9434 | ||
ST | 18.72 | 277 | 28682 | ||
Nano Science & Technology | ME | General | 6814 | 51 | 3748 |
PH | General | 39 | 393 | 1276 | |
EE | General | 38.13 | 475 | 7421 | |
OBC NLC | 33.52 | 434 | 9835 | ||
EC | OBC NLC | 35.07 | 479 | 8861 | |
SC | 18.75 | 270 | 39098 |
M.Tech Course | GATE Paper | Gen | OBC | SC | ST | PD |
Civil & Infrastructure Engineering | CE | 609 | 572 | 449 | - | - |
Communication System Engineering | EC | 677 | 588 | 482 | 348 | 373 |
Computer Science Engineering | CS | 683 | 680 | 540 | - | 447 |
Mathematics & Computing | EC | 676 | 720 | - | - | - |
CS | 788 | 559 | 441 | - | 447 | |
AE | 653 | - | 245 | - | - | |
MA | 756 | - | - | - | - | |
IN | - | 579 | - | - | - | |
ME | - | 610 | - | - | - | |
Materials Science & Engineering | XE | 385 | 411 | - | - | - |
ME | 680 | 654 | - | - | - | |
CH | 493 | - | - | - | - | |
MT | 409 | 294 | - | - | - | |
Mechanical Engineering | ME | 735 | 676 | 581 | 391 | - |
Mechatronics | IN | 579 | - | - | - | - |
ME | 625 | 583 | 410 | - | - | |
EC | - | - | 386 | - | - | |
Nano Science & Technology | EE | 607 | - | - | - | - |
EC | 605 | 246 | 435 | - | 316 | |
XE | -- | - | - | - | - | |
ME | 535 | 437 | - | - | - | |
PH | - | 411 | - | - | - |
IIT Patna GATE 2025 cutoff is dependent on several factors listed below. Students must note that GATE Cutoff 2025 will vary for all the different programs and also for various categories. Below are the factors that determine the IIT Patna MTech cut-off.
Late Fee Application Date:26 May,2025 - 30 May,2025
GATE BT (Biotechnology) score of 350, you have a good chance of securing admission to Delhi Technological University (DTU) for M.Tech in Biotechnology or related programs.
Eligibility Criteria:
You must have a valid GATE score in Biotechnology (BT) or a related discipline.
A minimum of 60% (or equivalent CGPA) in your B.Tech/B.E (Biotech or related field) from a recognized university.
Cutoff Trends :
DTU's cutoff for GATE BT usually ranges between 300-400 (varies yearly based on competition.
Unfortunately, you've missed the GATE 2025 exam registration deadline, which was initially September 20, 2024, and later extended to October 3, 2024, for regular registration, with a late fee option available until October 7, 2024. Since the exam dates are already scheduled for February 1, 2, 15, and 16, 2025, you won't be able to apply for this year's exam.
However, here are some potential options to consider:
- Prepare for GATE 2026: You can start preparing for the next year's exam, ensuring you meet the eligibility criteria and stay updated on the application process.
- Explore other exams: Look into other entrance exams for postgraduate programs, such as those offered by individual universities or institutions.
- Check eligibility for other programs: If you're interested in pursuing a postgraduate degree, research other programs that don't require GATE scores.
To better prepare for future exams, focus on
- Understanding the syllabus: Familiarize yourself with the exam pattern, syllabus, and marking scheme.
- Creating a study plan: Develop a structured study schedule, covering all relevant topics.
- Practicing with mock tests: Regularly take practice tests to assess your knowledge and identify areas for improvement.
Keep in mind that GATE scores are valid for three years, so if you plan to take the exam in 2026, your score will be valid until 2029.
Hello there,
With a GATE Electrical Engineering (EE) score of 630, getting admission to the M.Tech program in Instrumentation and Integrated Electronics at IIT Kharagpur is unlikely.
Key points:
The closing GATE score for this program in 2024 was around 608 for the general category.
For reserved categories, cutoffs are lower (OBC around 573, SC around 337, ST around 248).
Admission depends on GATE score and sometimes an interview.
Recommendations:
You can consider applying to other IITs or NITs where your score may meet the cutoff for similar courses.
Explore other reputed institutes offering M.Tech in Instrumentation and Electronics.
If this field is important for you, consider preparing to improve your GATE score for the next attempt.
I hope this answer helps you. If you have more queries, feel free to share your questions with us, and we will be happy to assist you.
Thank you, and I wish you all the best in your bright future.
Hello there,
Yes, a student waiting for the final semester (S6 or S8) result but has passed all other semesters and holds a valid GATE score can apply for M.Tech admission.
However, final admission usually depends on:
Clearing all pending semester exams before the admission deadline.
Submission of the final semester marksheet or provisional certificate when required.
Colleges may allow provisional admission based on GATE and previous results, but you must clear the remaining semester to continue the course.
I hope this answer helps you. If you have more queries, feel free to share your questions with us, and we will be happy to assist you.
Thank you, and I wish you all the best in your bright future.
The time needed to prepare for the GATE exam varies greatly depending on individual factors like study habits, whether the concepts are clear or not and etc...However, a timeframe of 1 to 2 years is generally recommended for serious preparation, especially if you're aiming for a good rank.
If your basics are clear and you are well known with the concepts then focus on pyq's and give mock tests and re-revise the syllabus. But if your preparation is not that much good then I would suggest that give a complete one year time and prepare well and then appear for the Exam.
A flight attendant ensures passenger safety and comfort during flights. Key duties include conducting safety checks, assisting passengers, serving food and drinks, and managing emergencies. They must be well-trained in safety procedures and customer service. A high school diploma is typically required, followed by rigorous training to qualify for the role.
An aerospace engineer designs, develops, tests, and maintains aircraft, spacecraft, and related systems. They apply physics and engineering principles to improve aerospace technologies, often working in aviation, defence, or space sectors. Key tasks include designing components, conducting tests, and performing research. A bachelor’s degree is essential, with higher roles requiring advanced study. The role demands analytical skills, technical knowledge, precision, and effective communication.
A career in the aviation industry always sounds exciting. But, there is no scope for the slightest error as it may cost the lives of many people. A Flight Engineer role comes with the responsibility of monitoring the aircraft engine and control systems while in flight. Whenever the aircraft is away from the home station, he or she is required to perform pre-flight and post-flight inspections
An Aircrew Officer operates and navigates aircraft, ensuring safe flights and compliance with aviation regulations. Key duties include managing flight systems, conducting pre- and post-flight checks, and adhering to safety standards. The role typically requires working five days a week, with around 120 flight hours monthly. Employment may be contractual or permanent, depending on the airline.
An air hostess, or flight attendant, ensures passenger safety and comfort during flights. Responsibilities include safety demonstrations, serving meals, managing the cabin, handling emergencies, and post-flight reporting. The role demands strong communication skills, a calm demeanour, and a service-oriented attitude. It offers opportunities to travel and work in the dynamic aviation and hospitality industry.
An aeronautical engineer designs, develops, tests, and maintains aircraft and related systems. They work on components like engines and wings, ensuring performance, safety, and efficiency. The role involves simulations, flight testing, research, and technological innovation to improve fuel efficiency and reduce noise. Aeronautical engineers collaborate with teams in aerospace companies, government agencies, or research institutions, requiring strong skills in physics, mathematics, and engineering principles.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
An airline pilot operates aircraft to transport passengers and cargo safely. Responsibilities include pre-flight planning, in-flight operations, team collaboration, and post-flight duties. Pilots work in varying schedules and environments, often with overnight layovers. The demand for airline pilots is expected to grow, driven by retirements and industry expansion. The role requires specialized training and adaptability.
Welding Engineer Job Description: A Welding Engineer work involves managing welding projects and supervising welding teams. He or she is responsible for reviewing welding procedures, processes and documentation. A career as Welding Engineer involves conducting failure analyses and causes on welding issues.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
Individuals who opt for a career as an environmental engineer are construction professionals who utilise the skills and knowledge of biology, soil science, chemistry and the concept of engineering to design and develop projects that serve as solutions to various environmental problems.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
A Conservation Architect is a professional responsible for conserving and restoring buildings or monuments having a historic value. He or she applies techniques to document and stabilise the object’s state without any further damage. A Conservation Architect restores the monuments and heritage buildings to bring them back to their original state.
A Structural Engineer designs buildings, bridges, and other related structures. He or she analyzes the structures and makes sure the structures are strong enough to be used by the people. A career as a Structural Engineer requires working in the construction process. It comes under the civil engineering discipline. A Structure Engineer creates structural models with the help of computer-aided design software.
Highway Engineer Job Description: A Highway Engineer is a civil engineer who specialises in planning and building thousands of miles of roads that support connectivity and allow transportation across the country. He or she ensures that traffic management schemes are effectively planned concerning economic sustainability and successful implementation.
A Field Surveyor collects precise land data using tools like GPS and drones to support construction, legal, and environmental projects. They identify boundaries, create maps, and collaborate with engineers. The role requires technical skills, analytical thinking, and physical stamina. Most begin with a diploma or degree in surveying or civil engineering, advancing with experience and specialisation.
Individuals who opt for a career as geothermal engineers are the professionals involved in the processing of geothermal energy. The responsibilities of geothermal engineers may vary depending on the workplace location. Those who work in fields design facilities to process and distribute geothermal energy. They oversee the functioning of machinery used in the field.
A geologist attempts to comprehend the historical backdrop of the planet we live on, all the more likely to anticipate the future and clarify current events. He or she analyses the components, deployments, results, physical characteristics, and past of the planet. A geologist examines the landforms and landscapes of the earth in relation to the geology, climatic, and human processes that have shaped them.
A geologist studies earth procedures, for example, seismic tremors, avalanches, floods, and volcanic eruptions to review land and draw up safe structure plans. When he or she researches earth materials, explores metals and minerals, yet in addition search for oil, petroleum gas, water, and strategies to extricate these.
Energy efficiency engineering is a broad field of engineering which deals with energy efficiency, energy services, facility management, plant engineering, and sustainable energy resources. Energy efficiency engineering is one of the most recent engineering disciplines to emerge. The field combines the knowledge and understanding of physics, chemistry, and mathematics, with economic and environmental engineering practices. The main job of individuals who opt for a career as an energy performance engineer is to find the most efficient and sustainable path to operate buildings and manufacturing processes.
Individuals who opt for a career as energy performance engineers apply their understanding and knowledge to increase efficiency and further develop renewable sources of energy. The energy efficiency engineers also examine the use of energy in those procedures and suggest the ways in which systems can be improved.
A career as a Petroleum engineer is concerned with activities related to producing petroleum. These products can be in the form of either crude oil or natural gas. Petroleum engineering also requires the exploration and refinement of petroleum resources. Therefore, a career as a petroleum engineer comes up with oil and gas onshore jobs. There are also desk jobs in the petroleum industry. In layman’s terms, a petroleum engineer is a person who finds the best way to drill and extract oil from oil wells. Individuals who opt for a career as petroleum engineer also tries to find new ways to extract oil in an efficient manner.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
A career as a civil engineer is of great importance for the infrastructural growth of the country. It is one of the most popular professions and there is great professional as well as personal growth in this civil engineering career path. There is job satisfaction in this civil engineering career path, but it also comes with a lot of stress, as there are multiple projects that need to be handled and have to be completed on time. Students should pursue physics, chemistry and mathematics in their 10+2 to become civil engineers.
A career as a Transportation Engineer is someone who takes care of people's safety. He or she is responsible for designing, planning and constructing a safe and secure transportation system. The transportation sector has seen a huge transformation and is growing day by day and improving every day.
As a Transport Engineer, he or she needs to solve complex problems such as accidents, costs, traffic flow, and statistics. A Transport Engineer also collaborates for projects with some other companies.
A Loco Pilot operates trains, ensuring safe and timely transport of passengers or goods. Starting as an Assistant Loco Pilot, one can progress to senior roles with experience. The job demands technical knowledge, focus, and adherence to safety protocols. It involves coordination with train staff and may require working long hours under pressure.
Ranked amongst top 3% universities globally (QS Rankings).
NAAC A++ Accredited | Accorded institution of Eminence by Govt. of India | NIRF Rank #4
Ranked #1 Among all Private Indian Universities in QS Asia Rankings 2025 | Scholarships worth 210 CR
Highest CTC 50 LPA | Average CTC 5.3 LPA | Merit Based Scholarships
M.Tech admissions open @ VIT Bhopal University | Highest CTC 52 LPA | Apply now
100+ Industry collaborations | 10+ Years of legacy