UPES M.Tech Admission 2019: University of Petroleum and Energy Studies has declared the interview schedule for UPES M.Tech admission 2019. Students can find the detailed schedule and venues for interview below on this page. Interview for UPES M.Tech admission 2019 will be conducted on June 8 and 9. The UPES M.Tech admission interview 2019 will be conducted at UPES campus as well as some other centres detailed by the university. Candidates must check their eligibility criteria of respective programmes since the criteria differs for each programme offered by the Institute. The application form of UPES M.Tech 2019 has been closed. Candidates were required to fill personal, academic and contact details in UPES M.Tech 2019 application form and pay the Rs. 1850/- as application fees. After the payment, download the receipt and application form for future reference. The interview schedule of UPES M.Tech admission 2019 has been scheduled on June 8 and 9 at various locations. Phase II interview for vacant seats, if any, will be announced at later stages. Candidates are invited for counselling of UPES M.Tech 2019 and will be allotted seat after successful document verification. The admission authorities will offer admission to 14 M.Tech courses to eligible candidates. Candidates can go through this article for complete information related to dates, eligibility criteria, application form, selection process, syllabus, exam pattern, result and counselling.Latest: UPES M.Tech admission interview schedule released
Latest: [Download free Question Papers and Sample Paper of GATE, Click here]
Date of Interview
June 8, 2019
UPES corporate office, 210, Okhla Phase III, New Delhi- 110020
Nearest Metro- Okhla NSIC/ Govindpuri
Ms. Prerna Tripathi
UPES Regional Office, 405-406,Fourth Floor, Shivashish Commercial Complex, 19th Road, Chembur (East), Mumbai
Mr. Ninad Sapre
UPES, Knowledge Acres, P.O. Kandoli, Via-Prem Nagar, Dehradun
Mr. Vaibhav Bansal
Hotel Sudesh Tower, 22 Lansdowne Terrace Near National High School, Kolkata
Mr. Sukamal De
June 9, 2019
Hotel Levana, 72, Mahatma Gandhi Marg, Hazratganj, Lucknow
Mr. Sarvesh Kumar
Hotel Residency, 208, Ram Gopal Maheshwari Marg, MP Nagar Zone-I, Maharana Pratap Nagar, Bhopal
Mr. Faisal Haseeb
Hotel Savera, 146, Dr Radha Krishnan Salai, CIT Colony, Mylapore, Chennai.
Mr. Tarun Arora
Lemon Tree Premier, 7th Floor, Tangerine 2, Nirwan Marg, Bani Park, Jaipur
Mr Arshad Hussain
Hotel Minerva Grand, Sarojini Devi Road, Secunderabad
UPES Experience Zone, 1st Floor, Majestic Plaza West Boaring Canal Road, Patna-800001 Landmark: Nr. Tata Motors Showroom
Mr Raman Kumar
Chemical Engineering with specialization in Process Design Engineering
Computer Science & Engineering with specialization in Artificial Intelligence
Computational Fluid Dynamics
Health, Safety & Environment with specialization in Disaster Management
Nuclear Science & Technology
Renewable Energy Engineering
Aerospace Engineering with specialization in Unmanned Aerial Vehicles (UAV)
Structural Engineering with specialization in offshore structures
Health, Safety & Environment Engineering
UPES M.Tech 2019 - Overview
Download Free Sample Paper for GATE
Name of Examination
UPES M.Tech Engineering Entrance Test
Commonly Known As
University of Petroleum and Energy Studies
Level of Examination
Number of Programmes Offered
Mode of Application
Online and Offline
UPES M.Tech Eligibility Criteria 2019Candidates who wish to take admission to M.Tech programmes are advised to refer to eligibility criteria of UPES M.Tech 2019 to know the criteria which must be met in order to be eligible for admission process. With the help of UPES M.Tech 2019 eligibility criteria, candidates will have complete information related to requirements which must be met by the candidates in order to get admission in required programme. The eligibility criteria of UPES M.Tech 2019 will be different for each course offered by the Institute/University.
Candidates applying must have qualified B.E./B.Tech in specified field with a minimum of 60% marks
Candidates must have also secured a minimum of 60% marks in their Class 10th and 12th standard qualifying examination
Candidates applying through GATE valid score will be exempted from UPES M.Tech 2019 entrance examination
M.Tech in Chemical Engineering with specialization in Process Design Engineering
Minimum 60% marks at Higher & Senior Secondary level (10th & 12th)
B.Tech/B.E. in Chemical Engineering or Chemical Technology/Petro Chemical Engineering/Petroleum Engineering with minimum 60% marks
M.Tech in Computer Science & Engineering
B.Tech/B.E. in IT/CSE or MCA/M.Sc in IT/Physics/Mathematics/Statistics with minimum 60% marks
M.Tech in Energy Systems
B.Tech/B.E. in Electrical/Electronics/EEE/Mechanical/Chemical/Instrumentation & Control Engineering with minimum 60% marks
M.Tech in Pipeline Engineering
B.Tech/B.E. in Mechanical/Chemical/Civil/Petroleum/Engineering with minimum 60% marks
M.Tech in Automation & Robotics Engineering
B.Tech/B.E. in Electronics/EEE/Mechanical/Computer Science & Engineering/Electrical/Instrumentation & Control Engineering with minimum 60% marks
M.Tech in Computational Fluid Dynamics
B.Tech/B.E. in Aerospace/Aeronautical/Mechanical/Civil/Chemical with minimum 60% marks
M.Tech in Health, Safety & Environment with specialization in Disaster Management
B.Tech/B.E. in Chemical/Mechanical/Electrical/Civil/Industrial Safety/Petroleum Engineering/Geo-Science Engineering/Fire Safety Engineering/Electronics/Geo Informatics with minimum 60% marks
M.Tech in Nuclear Science & Technology
B.Tech/B.E. in Mechanical/Chemical/Electrical/Electronics/EEE/EIE or M.Sc (Physics) with minimum 60% marks
M.Tech in Renewable Energy Engineering
M.Tech in Rotating Equipment
Minimum 60% marks at Higher & Senior Secondary level(10th & 12th)
B.Tech/B.E. in Mechanical/Production & Industrial/Mechatronics/Industrial Automation with minimum 60% marks
M.Tech in Aerospace Engineering with specialization in Unmanned Aerial Vehicles (UAV)
B.Tech/B.E. in Aerospace/Aeronautical/Avionics/CSE/ECE/MECH/EEE/EIE with minimum 60% marks
M.Tech in Structural Engineering
Minimum 60% marks at Higher & Senior Secondary Level (10th & 12th)
B.Tech/B.E. in Civil Engineering with minimum 60% marks
M.Tech in Health, Safety & Environment Engineering
M.Tech in Petroleum Engineering
B.Tech/B.E. in Petroleum/Geo-Science/ Gas Engineering/ Petrochemical Refining/ Petrochemical Engineering/ Mechanical/ Chemical or M.Sc in Geology with minimum 60% marks
UPES M.Tech Application Form 2019The admission authority of Institute released the application form of UPES M.Tech 2019 in both online and offline mode on September 14. UPES M.Tech 2019 application form was available till April 30, 2019. Students can find below the application process for UPES M.Tech admission. Candidates will have to check the eligibility criteria before filling the application form of UPES M.Tech 2019. Before filling the application form, candidates will have to register first followed by providing information in personal, academic and contact details section. Candidates can refer to following step-wise process while filling the application form of UPES M.Tech 2019.
Step 1 – Registration
Step 2 – Filling and Submission of Application Form
Step 3 – Payment of Application Fees
Step 1 – Registration: Candidates will have to register first before filling the application form of UPES M.Tech 2019. During registration step, candidates will have to provide details such as Name, Email address, Mobile number, State, City and Course which a candidate wishes to pursue and then click on Submit. An OTP will be sent to candidate’s registered mobile number which needs to be verified. After the verification is complete, proceed further to fill the application form.
Step 2 – Filling and Submission of Application Form: After the registration is complete, candidates will have to provide other details required in application form of UPES M.Tech 2019. Candidates will have to provide their personal, academic and contact details while filling up the application form. After filling the application form, candidates will be required to pay the application fee after which only application form will be accepted.
Photograph and Signature: Candidate must upload the scanned image of photograph and signature in JPEG/JPG/GIF format whose size must not exceed more than 50kb.
Educational Qualifications: Candidates must be ready with Class 10th and 12th standard educational details as well as graduation degree details.
Programme Preference and Application Pathway: Candidates must select “Exam” if they wish to appear for personal interview and choose “Non-exam” if they wish to apply through GATE score.
Step 3 – Payment of Application Fees: On successful completion of application form, candidates will be prompted to make payment of application form amounting to Rs. 1850/-. The application fee can be paid in an online mode through Credit/Debit Card or Net Banking or UPI or wallet (PhonePe or BHIM UPI). After successful payment of application fee, candidates are advised to download fee receipt and application form in PDF format for future reference.
Candidates could get the offline application form of UPES M.Tech 2019 on payment of application either through demand draft or through cash.
Through Demand Draft: Candidates applying through offline mode of application form will have to get a demand draft made of Rs. 1850/- in favor of “UPES Fee Account” payable at New Delhi/Dehradun and will have to send it to below mentioned address. On receiving the application form, candidates are advised to fill the application form in their own and then have to affix their photograph. Candidates must then submit their filled application form.
Through Cash: Candidates can purchase their application form on cash payment of Rs. 1850/- from either of admission counters located at Ahmedabad, Chandigarh, Delhi, Dehradun, Hyderabad, Kolkata, Mumbai.
The admission authority will offer admission to candidates through merit list on the basis of GATE score. Screening process will comprise of two processes namely: screening of application and interview.
Candidates applying through GATE with a valid score (in last 3 years) will be preferred and may be offered teaching and research assistant-ship while pursuing programme as per the requirement and discretion of University
Also, the admission will be offered after screening of application form
Admission will be offered to candidates primarily on the basis of merit
UPES M.Tech Counselling 2019Admission authorities of Institute will conduct counselling of UPES M.Tech 2019 on June 8 and 9 to offer admission in M.Tech courses. The shortlisted candidates will have to report to scheduled venue to attend UPES M.Tech 2019 counselling and get their documents verified. After successful verification of documents, candidates will be allotted seats in desired programmes. Candidates allotted seats will have to pay the required admission fee through which allotted seats will be confirmed.
GATE 2019 Score Card
Class 10th and 12th marksheets and pass certificate
Mark Sheet of all years related to graduation
Conduct Certificate from the University/Institute last attended
Degree Certificate or Provisional Pass Certificate issued by the Board/University
University of Petroleum and Energy Studies (UPES)
P.O. Bidholi, Via-Prem Nagar,
GATE College Predictor 2020 - Predict your colleges and courses in which you are likely to get ad...
GATE Cutoff for ME 2020 - IIT, Delhi will release the GATE 2020 cutoff for ME along with the decl...
GATE 2020 Syllabus for Civil Engineering consists of the topics and subjects that the candidates ...
GATE 2020 Syllabus for Electronics and Communication Engineering ECE - GATE ECE syllabus is divid...
GATE 2020 syllabus for Architecture and Planning (AR) will be provided by IIT Delhi for the candi...
As you are still in your 3rd year, you might not be still aware of the complete GATE syllabus. So analyse the topics and syllabus that you have learnt for the past 3 years and practise as much Mathematics as you can. Try as many mock tests as possible and get a hang of the exam pattern. Please check our page for syllabus, topics and best books for preparation:
Dear Harish, IIT Delhi has scheduled diiferent correction windows for different correction categories. The tentative dates to make corrections to your Category would be from the last week of October to 1st week of November. This is tentative and so please keep an eye on the official website. You can change your Category but you will not be refunded any additional amount that you paid towards your application form. For more information, please visit our page at:
Dear Pramod, IIT Delhi has closed registrations for GATE 2020 as on October 5th, 2019 along with late fees. Now the correction window has been opened. At this juncture, registering for GATE 2020 is not a possibility. You may have to wait until the next year if you plan on appearing for GATE. For GATE 2020, you have been late.
Your GATE brochure has been successfully mailed to your registered email id .
The Question containing Inaapropriate or Abusive Words
Question lacks the basic details making it difficult to answer
Topic Tagged to the Question are not relevant to Question
Question drives traffic to external sites for promotional or commercial purposes
The Question is not relevant to User
Regular exam updates, QnA, Predictors, College Applications & E-books now on your Mobile