HomeEngineering and Architecture ExamsGujarat Post Graduate Common Entrance Test

Gujarat PGCET 2024 Exam – Counselling (Started), Seat Allotment, Cutoff, Eligibility, Admission

Updated on 08th November, 2024 by Team Careers360

About Gujarat PGCET 2024

Gujarat PGCET 2024 - ACPC announced the Gujarat PGCET 2024 seat allotment for round 1 on August 27. The link to check the seat allotment of Gujarat PGCET 2024 is updated on the website, acpc.gujarat.gov.in. Candidates could complete the round 1 choice filling and locking for Gujarat PGCET counselling 2024 from August 21 to 23.  The authority announced the Gujarat PGCET result for mock round on August 21. Gujarat PGCET choice filling for the mock round was held from August 17 to 19. Moreover, the Gujarat PGCET 2024 result was declared on August 16 on the official website, acpc.gujarat.gov.in. The final answer key of Gujarat PGCET 2024 was released on August 13. Candidates can download the Gujarat PGCET answer key pdf on the website, acpc.gujarat.gov.in. The authority released the provisional answer key of Gujarat PGCET 2024 was released on August 4. Candidates could challenge the provisional answer key by August 6. The Gujarat PGCET 2024 exam was conducted on August 3 and 4. The Gujarat PGCET admit card 2024 was issued online. Students willing to appear for the Gujarat Post Graduate Admission 2024 should either have qualified for the  GATE examination or have to appear for the entrance exam conducted by the authorities.

Those candidates who are willing to appear for the Gujarat PG exam are advised to go through the Gujarat PGCET exam pattern 2024. The exam pattern of Gujarat PGCET 2024 will help to know the paper pattern. Also, candidates should closely study the Gujarat PGCET syllabus 2024 to know the topics asked in the entrance examination.

The Gujarat PGCET 2024 exam schedule includes various disciplines on August 3 to 5 2024, across multiple cities. On July 27, Chemical Engineering, Electrical Engineering, M. Arch, Aerospace Engineering, Metallurgy, Environmental Engineering, Food Engineering, and Electronics & Communication will be conducted from morning to evening at centres in Ahmedabad, Baroda, Rajkot, and Surat. The following day, July 28, Civil Engineering, Mechatronics Engineering, Textile Engineering, Mechanical Engineering, Instrumentation & Control, and Computer Engineering will be held at the same venues in two sessions.

The Gujarat PGCET 2024 provisional merit list will be announced on August 12, 2024. The authority will conduct the Gujarat PGCET choice filling from August 13 to 14, 2024, and the Gujarat PGCET mock result will be announced on August 17, 2024.

The Gujarat PGCET 2024 registration and fee payment process was concluded on July 1,  2024.  Moreover, the authority has also uploaded the provisional list of Gujarat PGCET 2024 participating institutes online. Candidates who have secured at least 50% marks in B.E/B.Tech courses will be able to apply for the PGCET entrance exam. Additionally, candidates must have qualified in the GATE examination in the relevant discipline of engineering. However, the eligibility criteria for Gujarat PGCET 2024 may vary for each discipline.

Gujarat PGCET Latest News and Updates 2024

  • Gujarat PGCET seat allotment for round 1 announced.
  • Gujarat PGCET choice filling for mock round concluded.
  • Gujarat PGCET 2024 result announced.
  • Gujarat PGCET answer key released.
  • Gujarat PGCET 2024 exam concluded.
  • The authority has revised the Gujarat PGCET 2024 exam dates.
  • The authority has revised the Gujarat PGCET 2024 exam dates.
  • The authority has concluded the Gujarat PGECET 2024 registration process on July 1, 2024.
  • The authority commenced the Gujarat PGECET 2024 application form on June 20.
  • ACPC has announced the Gujarat PGCET 2024 schedule on the official website.

Candidates who successfully fill out the application form and are willing to get admission via the entrance examination will be able to download the Gujarat PGCET hall ticket in online mode. The authorities will issue the Gujarat PGCET admit card 2024 at the official website. Candidates have to carry the admit card of Gujarat PGCET with them to the examination centre. 

About the Gujarat PGCET Exam 

ACPC conducts the Gujarat PGCET exam for admissions into postgraduate courses offered by the participating institutes of the exam. It is to be noted that GATE-qualified candidates applying for the Gujarat PGCET 2024 exam are not required to appear in the entrance test as they are eligible for direct admission.

The authorities released the Gujarat PGCET result 2024 in online mode. The authorities could download the Gujarat PGCET 2024 rank list from jacpcldce.ac.in. It should be noted that the Gujarat PGCET 2024 result was released in the form of a merit list.

Candidates will be able to check the opening and closing ranks of Gujarat PGCET within which admission to M.Tech courses will be offered with the help of Gujarat PGCET 2024 cutoff marks

Candidates named under the merit list will be able to appear for the Gujarat PGCET counselling process. The authorities have announced the Gujarat PGCET counselling dates. Applicants with valid GATE exam scores will also be eligible for Gujarat PGCET counselling. The exam conducting authorities will conduct three rounds of PGCET counselling 2024. 

Read more

Latest: Gujarat PGCET 2024 Registration Started- Apply Now

Also Check: FREE Webinar Series on Online MBA and job-oriented Certification Programs. Register Now 

Gujarat PGCET 2024 Highlights

Full Exam Name
Gujarat Post Graduate Common Entrance Test
Short Exam Name
Gujarat PGCET
Conducting Body
Admission Committee for Professional Courses, Gujarat
Frequency Of Conduct
Once a year
Exam Level
State Level Exam
Languages
English
Mode Of Application
online
Application Fee
Online : 500
Mode Of Exam
offline
Mode Of Counselling
online +1 more
Participating Colleges
35
Exam Duration
1 Hour 30 Minutes

Gujarat PGCET Important Dates

Gujarat PGCET Gujarat Post Graduate Common Entrance Test (session 2024)

20 Jun' 2024 - 01 Jul' 2024 . Online
Application Date
04 Aug' 2024 - 04 Aug' 2024 . Online
Answer Key Date
Provisional answer key
27 Jul' 2024 - 04 Aug' 2024 . Online
Admit Card Date

Read More

Civil Engineering

ACPC prescribed parameters which candidates applying will have to fulfill is the eligibility criteria of Gujarat PGCET 2024. Candidates who will fail to match Gujarat PGCET 2024 eligibility criteria will have their application forms rejected. According to Gujarat PGCET eligibility criteria 2024, candidates should have:

  •  Passed the qualifying exam in the relevant B.Tech discipline (mentioned in the table below) with 50% marks (45% for SC/ST/SEBC candidates)
  •  Secured  qualifying marks in GATE in the relevant discipline for engineering

Discipline wise eligibility                                                

Discipline NameEligibility
Course/ Specialisation
Civil Engineering

Candidates need to have completed B.E./ B.Tech In Civil Engineering or Irrigation and Water Management or equivalent qualification with minimum 50% marks in the qualifying examination (45% for SC/ST/SEBC candidates)
Water Resources Management
Water Resources Engineering
Hydraulic Structures
Irrigation and Water Management
Water Resources Engineering and Management        
           



Candidates must have completed B.E./B.Tech. in Civil Engineering or equivalent qualification with minimum of 50% marks in the qualifying examination (45% for SC/ST/SEBC candidates)
Transportation Engineering
Transportation System Engineering
Highway and Transportation Engineering        
Structural Engineering
Structural Design
Computer Aided Structural
Analysis & design
Fracture Mechanics
Geotechnical Engineering
Soil Engineering
Construction Engineering and Management
Civil Engineering
Infrastructure Engineering
Computer-aided design of Structures                                
Town and Country Planning
Construction Project Management
Remote Sensing & GIS
Infrastructure Engineering & Technology


Mechanical Engineering

ACPC prescribed parameters which candidates applying will have to fulfill is the eligibility criteria of Gujarat PGCET 2024. Candidates who will fail to match Gujarat PGCET 2024 eligibility criteria will have their application forms rejected. According to Gujarat PGCET eligibility criteria 2024, candidates should have:

  • Passed the qualifying exam in the relevant B.Tech discipline (mentioned in the table below) with 50% marks (45% for SC/ST/SEBC candidates)
  • Secured  qualifying marks in GATE in the relevant discipline for engineering

Discipline wise eligibility                                     

Name  of the discipline
Eligibility
Course/ Specialisation
Mechanical Engineering                    
Candidates should have done B.E./ B.Tech. in Mechanical Engineering or Production Engineering Mechatronics Engineering or Industrial Engineering or Automobile Engineering or equivalent qualification with  minimum 50% marks  in the qualifying exam (45% for SC/ST/SEBC candidates)        
CAD/CAM        
           



Candidates need to have done B.E./ B.Tech. in Mechanical Engineering or Production Engineering or Mechatronics Engineering or Industrial Engineering or Manufacturing Engineering or equivalent qualification with minimum 50% marks in the qualifying exam (45% for SC/ST/SEBC candidates)        
Advance Manufacturing Techniques/Systems        
           



Candidates applying must have done B.E./B.Tech. in Mechanical Engineering or Production Engineering or Mechatronics Engineering or Industrial Engineering or equivalent qualification with minimum 0% marks in the qualifying exam (45% for SC/ST/SEBC candidates)        
Computer-aided Analysis & Design
           



Candidates must have done B.E./B.Tech. in Mechanical Engineering or Production Engineering or Automobile Engineering or Industrial Engineering  or Mechatronics Engineering  or Marine Engineering or equivalent qualification with minimum 50% marks in the qualifying exam (45% for SC/ST/SEBC candidates)
Machine Design        
           



Candidates should have done B.E./ B.Tech in Mechanical Engineering or Automobile Engineering or Marine   Engineering or equivalent qualification with minimum 50% marks in the qualifying exam (45% for SC/ST/SEBC candidates)
Internal Combustion Engines and Automobile        
Automobile Engineering/ Technology

           



Candidates need to have done B.E./ B.Tech. in Mechanical Engineering or equivalent qualification with minimum 50% marks in the qualifying exam (45% for SC/ST/SEBC candidates)
Cryogenics
Infrastructure Engineering & Technology
           



Those who are applying must have done B.E./ B.Tech. in Mechanical Engineering or Automobile Engineering or Aeronautical Engineering  or equivalent qualification with minimum 50% marks in the qualifying exam (45% for SC/ST/SEBC candidates)
Jet Propulsion and Gas Turbine
           



Candidates need to have completed B.E./ B.Tech. in Mechanical Engineering or Production Engineering or Automobile Engineering or Industrial Engineering or Marine Engineering or equivalent qualification with minimum 50% marks in the qualifying exam (45% for SC/ST/SEBC candidates)        
Energy Engineering        
           



Candidates should have completed B.E./ B.Tech. in Mechanical Engineering or Production Engineering or Automobile Engineering or Industrial Engineering or Marine Engineering or Manufacturing Engineering or equivalent qualification with minimum 50% marks in the qualifying exam (45% for SC/ST/SEBC candidates)        
Production Engineering
Manufacturing Engineering
Mechanical (Production)
           



To be eligible, candidates need to have done their B.E./B.Tech. in Mechanical Engineering or Marine Engineering or Automobile Engineering  or equivalent qualification with minimum 50% marks in the  qualifying exam (45% for SC/ST/SEBC candidates)  
Thermal             Science/Engineering
           



Candidates should have done B.E./B.Tech in Mechanical Engineering or Marine Engineering or equivalent qualification with minimum 50% marks in the qualifying exam (45% for SC/ST/SEBC candidates)        
Thermal and Fluid Engineering        
Thermal System and Design
           



Candidates need to have completed B.E./ B.Tech. in Mechanical Engineering or Production Engineering or equivalent qualification with minimum 50% marks in the qualifying exam (45% for SC/ST/SEBC candidates)      
Mechanical Engineering        
           



Candidates should have completed B.E./ B.Tech. in Industrial Engineering or Mechanical Engineering or Production Engineering or Mechatronics Engineering or Automobile Engineering or Aeronautical Engineering or equivalent qualification with minimum 50%  marks in the qualifying exam (45% for SC/ST/SEBC candidates)    
Industrial Engineering        

Electrical Engineering

According to Gujarat PGCET eligibility criteria 2024, candidates should have:

  • Passed the qualifying exam in the relevant B.Tech discipline (mentioned in the table below) with 50% marks (45% for SC/ST/SEBC candidates)
  • Secured qualifying marks in GATE in the relevant discipline for engineering

Discipline wise eligibility                              

Name of the disciplineEligibilityCourse/ Specialisation
Electrical EngineeringCandidates must have done B.E./ B.Tech. in Electrical Engineering or equivalent qualification with minimum 50% marks in the qualifying examination (45% for SC/ST/SEBC candidates)Automation and Control/ Power Systems 
High Voltage & Power system Engineering
                


                

            
Candidates should have completed B.E./B.Tech. in Electrical Engineering or Electronics Engineering or Electronics and Communication or Electronics and Telecommunication Engineering or Instrumentation and control Engineering or Bio-medical Engineering or Mechatronics Engineering or equivalent qualification with minimum 50% marks in the qualifying examination (45% for SC/ST/SEBC candidates) Automatic Control and Robotics            
                


                

            
Candidates need to have completed B.E./B.Tech. in Electrical Engineering or equivalent qualification with minimum 50% marks in the qualifying examination (45% for SC/ST/SEBC candidates)Electrical Power Engineering
Electrical Engineering
Infrastructure Engineering & Technology            
                


                

            
Candidates should have done B.E./ B.Tech. In Electrical Engineering or Electronics Engineering or Electronics and Communication Engineering or Electronics and Telecommunication Engineering or Instrumentation and control Engineering or Electrical and Electronics Engineering or Power Electronics Engineering or equivalent qualification with minimum 50% marks in the qualifying examination (45% for SC/ST/SEBC candidates)Industrial Electronics
Power Electronics and Electrical Drives
Electrical Drives & Control
                


                

            
Candidates applying must have completed B.E./B.Tech. in Electrical Engineering or Electronics Engineering or Electronics and Communication Engineering or Electronics and Telecommunication               

Engineering or Instrumentation and Control Engineering or equivalent qualification with minimum 50% marks in the qualifying examination (45% for SC/ST/SEBC candidates)

Microprocessor System and Application            
                


                

            
Candidates need to have completed B.E./ B.Tech. in Power Electronics or Electronics Engineering or Electronics and Communication Engineering or Electrical Engineering or Industrial

Electronics Engineering or equivalent qualification with minimum 50% marks in the qualifying examination (45% for SC/ST/SEBC candidates) 

Power Electronics


Electronics and Communication

Based on the Gujarat PGCET eligibility criteria 2024, candidates should have:

  • Passed  the qualifying exam in the relevant B.Tech discipline (mentioned in the table below) with 50% marks (45% for SC/ST/SEBC candidates)
  • Secured  qualifying marks in GATE in the relevant discipline for engineering

Discipline wise eligibility                                                                                  

Name of the discipline
Eligibility
Course/ Specialisation
Electronics and Communication
To be eligible, candidates must have completed B.E./ B.Tech. In Electronics and Communication Engineering or Electronics and Telecommunication or Electronics Engineering or Information and Communication technology or equivalent qualification with minimum 50% marks in the qualifying examination (45% for SC/ST/SEBC candidates)                    
Electronics and Communication Engineering        
Electronics and Communication Systems             Engineering        
Communication     Systems Engineering
Communication     Digital Communication
Wireless Communication System and Network
Signal Processing and VLSI Technology
Embedded System Technology
Wireless Communication Technology        
VLSI and Embedded System
VLSI and Embedded System Design
Microelectronics & VLSI design
VLSI system design
Signal Processing and Communications


Instrumentation and Engineering

According to Gujarat PGCET eligibility criteria 2024, candidates should have:

  •  Passed the qualifying exam in the relevant B.Tech discipline (mentioned in the table below) with 50% marks (45% for SC/ST/SEBC candidates)
  • Secured qualifying marks in GATE in the relevant discipline for engineering

Discipline wise eligibility

Name of the discipline
Eligibility
Course/ Specialisation
Instrumentation and Control Engineering

Candidates need to have completed B.E./ B.Tech. in Instrumentation and Control Engineering or Power Electronics  Engineering or Electronics and Communication Engineering or Electronics and Telecommunication Engineering or equivalent qualification with minimum 50% marks in the qualifying examination (45% SC/ST/SEBC candidates)
Applied Instrumentation
Instrumentation and Control Engineering
Process Control & Instrumentation


Chemical Engineering

Based on the Gujarat PGCET eligibility criteria 2024, candidates should have:

  • Passed the qualifying exam in the relevant B.Tech discipline (mentioned in the table below) with 50% marks (45% for SC/ST/SEBC candidates)
  • Secured qualifying marks in GATE in the relevant discipline for engineering

Discipline wise eligibility                                                                                                                                                                                                                                                                                  

Name of the discipline
Eligibility
Course/ Specialisation
Chemical Engineering
Candidates should have completed B.E./B.Tech. in Chemical Engineering/ Technology or Petroleum and Petrochemical Technology or Rubber Technology or Plastic Technology or Biotechnology or equivalent qualification with minimum 50% marks in the qualifying examination (45% for  SC/ST/SEBC candidates)
Computer Aided Process Design
           



Candidates must have completed B.E./ B.Tech. in Chemical Engineering/ Technology or Polymer Engineering or Rubber Technology or Plastic Technology or Biotechnology or equivalent qualification minimum 50% marks in the qualifying examination (45% for SC/ST/SEBC candidates)
Polymer Technology
Plastics Engineering
Rubber Technology
           



Candidates need to have completed B.E./ B.Tech. in Chemical Engineering/ Technology or Petroleum & Petrochemical Technology or Biotechnology or equivalent qualification with minimum 50% marks in the qualifying examination (45% for SC/ST/SEBC candidates)
Petrochemical Engineering
           



Candidates should have done B.E./ B.Tech. in Chemical Engineering/ Technology  or Petroleum & Petrochemical Technology or Biotechnology or Environment Science & Technology or equivalent qualification with minimum 50% marks in the qualifying examination (45% for SC/ST/SEBC candidates)
Chemical Engineering
           



Candidates should have completed B.E./ B.Tech. in Chemical Engineering/ Technology or Biotechnology or equivalent qualification with minimum 50% marks in the  qualifying examination (45% for SC/ST/SEBC candidates)
Surface Science and Nanotechnology


Environment Engineering

According to Gujarat PGCET eligibility criteria 2024, candidates should have:

  • Passed the qualifying exam in the relevant B.Tech discipline (mentioned in the table below) with 50% marks (45% for SC/ST/SEBC candidates)
  • Secured qualifying marks in GATE in the relevant discipline for engineering

Discipline wise eligibility

Name of the discipline
Eligibility
Course/ Specialisation
Environment Engineering        
To be eligible, candidates need to have completed B.E./ B.Tech. in Environment Engineering or Civil Engineering or Chemical       Engineering/ Technology or Biotechnology or Environment Science & Technology/ Engineering or equivalent  qualification with minimum 50% (45% for SC/ST/SEBC candidates) marks in the qualifying examination.
Environment Management
Environmental Engineering


Metallurgy

According to Gujarat PGCET eligibility criteria 2024, candidates should have:

  • Passed the qualifying exam in the relevant B.Tech discipline (mentioned in the table below) with 50% marks (45% for SC/ST/SEBC candidates)
  • Secured qualifying marks in GATE in the relevant discipline for engineering

Discipline wise eligibility                                                                                                                         

Name of the discipline
Eligibility
Course/ Specialisation
Metallurgy        
Candidates need to have completed B.E./ B.Tech. in Metallurgy or Metallurgy and Materials Engineering or Mechanical Engineering or Production Engineering or equivalent qualification with minimum 50% (45% for SC/ST/SEBC candidates) marks in the qualifying examination
Materials Technology
           



Candidates should have done B.E./ B.Tech. in Metallurgy or Metallurgy and Materials Engineering or equivalent qualification with minimum 50% (45% for SC/ST/SEBC candidates) marks in the qualifying examination
Industrial Metallurgy


Textile Engineering

According to Gujarat PGCET eligibility criteria 2024, candidates should have:

  • Passed the qualifying exam in the relevant B.Tech discipline (mentioned in the table below) with 50% marks (45% for SC/ST/SEBC candidates)
  •  Secured qualifying marks in GATE in the relevant discipline for engineering

Discipline wise eligibility                                                                                                                                            

Name of the discipline
Eligibility
Course/ Specialisation      
Textile Engineering
Candidates should have done B.E./ B.Tech. in Textile Technology or Textile Engineering or Textile Processing or equivalent qualification with minimum 50% (45% for SC/ST/SEBC candidates) marks in the  qualifying examination
Man-Made Textile
           



Candidates  must have completed B.E./ B.Tech in Textile Chemistry Fibre Technology or Wet Processing or Textile Processing or equivalent qualification with minimum 50% (45% for SC/ST/SEBC candidates) marks in the  qualifying examination
Textile Chemical Processing
           



Candidates need to have done B.E./ B.Tech. in Textile Technology or Textile Engineering or Textile Processing or Jute and Fibre Technology or Textile Manufacturing or Textile Maintenance or equivalent qualification with minimum 50% (45% for SC/ST/SEBC candidates) marks in the qualifying examination
Textile Engineering/ Technology


Computer Engineering and Information Technology

According to Gujarat PGCET eligibility criteria 2024, candidates should have:

  • Passed the qualifying exam in the relevant B.Tech discipline (mentioned in the table below) with 50% marks (45% for SC/ST/SEBC candidates)
  • Secured  qualifying marks in GATE in the relevant discipline for engineering

Discipline wise eligibility                           

Name of the discipline
Eligibility
Course/ Specialisation
Computer Engineering and Information Technology

Candidates should have completed their B.E./ B.Tech. in Computer Engineering/ Technology or Computer Science and Engineering or Information Technology Engineering or Information and Communication technology or equivalent qualification with minimum  50% (45% for SC/ST/SEBC candidates) marks in the qualifying examination
Computer Engineering
Computer Science and Technology/ Engineering
Information Technology
Wireless and Mobile Computing
IT Systems and Network Security
Information and Cyber warfare
Cyber Security
Software Engineering
Data Science & Analytics  
High performance computing


Biomedical Engineering

Based on the Gujarat PGCET eligibility criteria 2024, candidates should have:

  • Passed the qualifying exam in the relevant B.Tech discipline (mentioned in the table below) with 50% marks (45% for SC/ST/SEBC candidates)
  • Secured qualifying marks in GATE in the relevant discipline for engineering

Discipline wise eligibility                                                                                               

Name of the discipline
Eligibility
Course/ Specialisation
Bio-medical Engineering        
Candidates applying must have completed B.E./ B.Tech. in Bio-medical Engineering or Bio-medical and Instrumentation Engineering or Instrumentation & Control Engineering or equivalent qualification with minimum 50% (45% for SC/ST/SEBC candidates) marks in the qualifying examination
Bio-medical Instrumentation


Mechatronics Engineering

According to Gujarat PGCET eligibility criteria 2024, candidates should have:

  • Passed the qualifying exam in the relevant B.Tech discipline (mentioned in the table below) with 50% marks (45% for SC/ST/SEBC candidates)
  • Secured  qualifying marks in GATE in the relevant discipline for engineering

Discipline wise eligibility                                                                                               

Name of the discipline
Eligibility
Course/ Specialisation
Mechatronics Engineering        
Candidates must have completed B.E./ B.Tech. in Mechatronics Engineering or Mechanical Engineering or Electronics and Communication Engineering or Electronics and Telecommunication or Electronics Engineering or equivalent qualification with minimum 50% (45% for SC/ST/SEBC candidates) marks in the qualifying examination
Mechatronics Engineering        


Networking Communication and Web Technology

Based on the Gujarat PGCET eligibility criteria 2024, candidates should have:

  • Passed  the qualifying exam in the relevant B.Tech discipline (mentioned in the table below) with 50% marks (45% for SC/ST/SEBC candidates)
  •  Secured  qualifying marks in GATE in the relevant discipline for engineering

Discipline wise eligibility

Name of the disciplineEligibilityCourse/ Specialisation
Networking, Communication and Web Technology        Candidates must have completed B.E./ B.Tech. in Computer Engineering/ Technology or Computer Science and Engineering or Information Technology or Electronics and Communication Engineering or equivalent qualification with minimum 50% (45% for SC/ST/SEBC candidates)       marks in the qualifying examination. Networking and Communication    
            


            

        
Candidates need to have done their B.E./ B.Tech. in Computer Engineering/ Technology or Computer Science and Engineering or Information Technology or equivalent qualification with minimum 50% (45% for SC/ST/SEBC     candidates) marks in the qualifying examination.Web Technology        


ACPC concluded the Gujarat PGCET 2024 registration process for Non-GATE/GPAT. Candidates must apply for Gujarat PGCET 2024 registration online mode. Before filling out the application form candidates had to fulfil the Gujarat PGECET eligibility criteria. The eligible candidates must complete the registration process before the last date. Both GATE/ GPAT qualified candidates and non-GATE/ GPAT candidates are allowed to fill out the application form. The steps involved in the Gujarat PGCET registration process are as follows:

Online registration: Firstly, candidates have to complete the initial registration with personal, academic, and communication details as required. Along with that, candidates also have to select one exam centre out of the options available. Further, they will have to create a password and upload a recent colour passport-size photograph in jpg/png/bmp format for a maximum of 20 KB.

Log in and submission of form: Next, candidates will have to authenticate all the particulars provided and accept the declaration given. After submission of the registration form, a unique registration number for a particular discipline will be generated on the screen and candidates will have to remember it. Candidates will be required to confirm the registration number and take at least two printouts of the filled application form for future reference.

Select Course for which Applying: At this stage, candidates have to choose the course for which they are willing to apply under Gujarat PGCET 2024. The course shall be opted as per the B.E./B.Tech specialization.

Uploading Certificates: Next, candidates have to upload documents of B.E./B.Tech and other certificates like SC/ST/PwD (if applicable). Candidates applying through GATE also need to upload their GATE scorecard.

Payment of Application Fees and Submission of Form: Finally, candidates have to pay the Gujarat PGCET application fee in online mode using credit/debit card or Internet banking. After the payment of the application fee, the Gujarat PGCET application form will be submitted automatically. 

Exclusive Careers360 Premium Content

Get education, career guidance; live webinars; learning resources and more

Subscribe Now

Documents Required at Exam Gujarat PGCET 2024

Gujarat Post Graduate Common Entrance Test 2024

  • Admit card
  • Valid ID proof - driving license
  • Valid ID proof - college ID card

Gujarat PGCET 2024 Exam Centers

StateCity
Gujarat
Rajkot
Ahmedabad
Baroda
Surat
Pearson | PTE

Register now for PTE & Unlock 20% OFF : Use promo code: 'C360SPL20'. Valid till 30th NOV'24! Trusted by 3,500+ universities globally

GMAT™ Exam

Select test center appointment | Scores valid for 5 Years | Multiple Attempts | Round 2 Closing Soon

Candidates appearing in the Gujarat Post Graduate entrance exam are advised to be aware of the type and number of questions, the medium of the exam, the time given to them in the exam, the marking scheme, etc. All this information is a part of the Gujarat PGCET 2024 exam pattern which is prescribed by ACPC.

Gujarat PGCET Exam Pattern 2024

The exam pattern of Gujarat PGCET 2024 can be checked by candidates from the table given below.   

Particulars

Details

Mode  of exam        

Offline        

Duration  of exam        

1 hour 30 minutes        

Type  of questions        

Multiple Choice Questions (MCQs)        

Total number of questions 

100        

Marking  scheme        

1 mark for every correct answer 

Negative  Marking        

No negative marking        

Language  of the paper        

English 

Note - Only a black ballpoint pen is allowed to be used in the OMR sheet of Gujarat PGCET 2024.

Other Engineering Exams

Graduate Management Admission Test
Select test center appointment | Scores valid for 5 Years | Multiple Attempts | Round 2 Closing Soon
Test of English as Foreign Language
Accepted by more than 11,000 universities in over 150 countries worldwide
Chandigarh University Common Entrance Test
Ranked #1 Among all Private Indian Universities In QS Asia Rankings 2025 | Scholarships worth 210 CR

Gujarat PGCET 2024 Syllabus

Gujarat PGCET 2024 Civil Engineering 2024

Engineering mathematics: Unit 01


Linear algebra
  • Matrix algebra, systems of linear equations, eigenvalues and eigenvectors

Engineering mathematics: Unit 02


Calculus
  • Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl
  • Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems

Engineering mathematics: Unit 03


Differential equations
  • First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, initial and boundary value problems, Laplace transforms
  • Solutions of one dimensional heat and wave equations and Laplace equation

Engineering mathematics: Unit 04


Complex variables
  • Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series

Engineering mathematics: Unit 05


Probability and Statistics
  • Definitions of probability and sampling theorems, conditional probability, mean, median, mode and standard deviation, random variables, poisson, normal and binomial distributions

Engineering mathematics: Unit 06


Numerical methods
  • Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations

Structural engineering: Unit 01


Mechanics
  • Bending moment and shear force in statically determinate beams
  • Simple stress and strain relationship: Stress and strain in two dimensions, principal stresses, stress transformation, Mohr’s circle
  • Simple bending theory, flexural and shear stresses, unsymmetrical bending, shear centre
  • Thin walled pressure vessels, uniform torsion, buckling of column, combined and direct bending stresses

Structural engineering: Unit 02


Structural analysis
  • Analysis of statically determinate trusses, arches, beams, cables and frames, displacements in statically determinate structures and analysis of statically indeterminate structures by force/ energy methods
  • Analysis by displacement methods (slope deflection and moment distribution methods), influence lines for determinate and indeterminate structures
  • Basic concepts of matrix methods of structural analysis

Structural engineering: Unit 03


Concrete structures
  • Concrete technology-properties of concrete, basics of mix design
  • Concrete design-basic working stress and limit state design concepts, analysis of ultimate load capacity and design of members subjected to flexure, shear, compression and torsion by limit state methods
  • Basic elements of prestressed concrete, analysis of beam sections at transfer and service loads

Structural engineering: Unit 04


Steel structures
  • Analysis and design of tension and compression members, beams and beam-columns, column bases
  • Connections-simple and eccentric, beam-column connections, plate girders and trusses
  • Plastic analysis of beams

Geotechnical engineering: Unit 01


Soil mechanics
  • Origin of soils, soil classification, three-phase system, fundamental definitions, relationship and interrelationships, permeability and seepage, effective stress principle, consolidation, compaction, shear strength

Geotechnical engineering: Unit 02


Foundation engineering
  • Subsurface investigations-scope, drilling bore holes, sampling, penetration tests, plate load test
  • Earth pressure theories, effect of water table, layered soils
  • Stability of slopes-infinite slopes, finite slopes
  • Foundation types-foundation design requirements
  • Shallow foundations-bearing capacity, effect of shape, water table and other factors, stress distribution, settlement analysis in sands and clays
  • Deep foundation pile types, dynamic and static formulae, load capacity of piles in sands and clays, negative skin friction

Water resources engineering: Unit 01


Fluid mechanics and hydraulics
  • Properties of fluids, principle of conservation of mass, momentum, energy and corresponding equations, potential flow, applications of momentum and Bernoulli’s equation, laminar and turbulent flow, flow in pipes, pipe networks
  • Concept of boundary layer and its growth
  • Uniform flow, critical flow and gradually varied flow in channels, specific energy concept, hydraulic jump
  • Forces on immersed bodies, flow measurements in channels, tanks and pipes
  • Dimensional analysis and hydraulic modeling
  • Kinematics of flow, velocity triangles and specific speed of pumps and turbines

Water resources engineering: Unit 02


Hydrology
  • Hydrologic cycle, rainfall and its measurement, evaporation, infiltration, stage discharge relationships, unit hydrographs, flood estimation, reservoir capacity, reservoir and channel routing
  • Well hydraulics

Water resources engineering: Unit 03


Irrigation
  • Duty, delta, estimation of evapotranspiration
  • Crop water requirements
  • Design of: Lined and unlined canals, canal regulation structure, waterways, head works, gravity dams, earthen dam and spillways
  • Design of weirs on permeable foundation
  • Types of irrigation system, irrigation methods
  • Water logging and drainage, sodic soils

Environmental engineering: Unit 01


Water requirements
  • Quality standards, basic unit processes and operations for water treatment
  • Drinking water standards, water requirements, basic unit operations and unit processes for surface water treatment, distribution of water
  • Sewage and sewerage treatment, quantity and characteristics of wastewater
  • Primary, secondary, and tertiary treatment of wastewater, sludge disposal, effluent discharge standards
  • Domestic wastewater treatment, quantity of characteristics of domestic wastewater, primary and secondary treatment, unit operations and unit processes of domestic wastewater, sludge disposal

Environmental engineering: Unit 02


Air pollution
  • Types of pollutants, their sources and impacts, air pollution meteorology, air pollution control, air quality standards and limits

Environmental engineering: Unit 03


Municipal solid wastes
  • Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and disposal)

Environmental engineering: Unit 04


Noise pollution
  • Impacts of noise, permissible limits of noise pollution, measurement of noise and control of noise pollution

Transportation engineering: Unit 01


Highway planning
  • Geometric design of highways, testing and specifications of paving materials, design of flexible and rigid pavements

Transportation engineering: Unit 02


Traffic engineering
  • Traffic characteristics, theory of traffic flow, intersection design, traffic signs and signal design, highway capacity

Surveying: Unit 01


Importance of surveying

    Surveying: Unit 03


    Mapping concepts

      Surveying: Unit 04


      Coordinate system

        Surveying: Unit 05


        Map projections

          Surveying: Unit 07


          Leveling

            Surveying: Unit 08


            Theodolite traversing

              Surveying: Unit 09


              Plane table surveying

                Surveying: Unit 10


                Errors and adjustments

                  Surveying: Unit 11


                  Curves
                    Gujarat PGCET 2024 Mechanical Engineering 2024

                    Engineering mathematics: Unit 01


                    Linear algebra
                    • Matrix algebra, systems of linear equations, eigenvalues and eigenvectors

                    Engineering mathematics: Unit 02


                    Calculus
                    • Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl
                    • Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems

                    Engineering mathematics: Unit 03


                    Differential equations
                    • First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, initial and boundary value problems, Laplace transforms
                    • Solutions of one dimensional heat and wave equations and Laplace equation

                    Engineering mathematics: Unit 04


                    Complex variables
                    • Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series

                    Engineering mathematics: Unit 05


                    Probability and Statistics
                    • Definitions of probability and sampling theorems, conditional probability, mean, median, mode and standard deviation, random variables, poisson, normal and binomial distributions

                    Engineering mathematics: Unit 06


                    Numerical methods
                    • Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations

                    Applied mechanics and design: Unit 01


                    Engineering mechanics
                    • Free body diagrams and equilibrium; trusses and frames; virtual work; kinematics and dynamics of particles and of rigid bodies in plane motion, including impulse and momentum (linear and angular) and energy formulations; impact

                    Applied mechanics and design: Unit 02


                    Strength of materials
                    • Stress and strain, stress-strain relationship and elastic constants, Mohr’s circle for plane stress and plane strain, thin cylinders; shear force and bending moment diagrams; bending and shear stresses; deflection of beams; torsion of circular shafts
                    • Euler’s theory of columns; strain energy methods; thermal stresses

                    Applied mechanics and design: Unit 03


                    Theory of machines
                    • Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of slider-crank mechanism; gear trains; flywheels

                    Applied mechanics and design: Unit 04


                    Vibrations
                    • Free and forced vibration of single degree of freedom systems; effect of damping; vibration isolation; resonance, critical speeds of shafts

                    Applied mechanics and design: Unit 05


                    Design
                    • Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram; principles of the design of machine elements such as bolted, riveted and welded joints, shafts, spur gears, rolling and sliding contact bearings
                    • Brakes and clutches

                    Applied mechanics and design: Unit 06


                    Balancing of machines
                    • Reciprocating and rotary masses
                    • Inline engine, V-engine

                    Fluid mechanics and thermal sciences: Unit 01


                    Fluid mechanics
                    • Fluid properties; fluid statics, manometry, buoyancy; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of continuity and momentum; Bernoulli’s equation; viscous flow of incompressible fluids; boundary layer
                    • Elementary turbulent flow; flow through pipes, head losses in pipes, bends, etc

                    Fluid mechanics and thermal sciences: Unit 02


                    Heat-transfer
                    • Modes of heat transfer; one dimensional heat conduction, resistance concept, electrical analogy, unsteady heat conduction, fins; dimensionless parameters in free and forced convective heat transfer
                    • Various correlations for heat transfer in flow over flat plates and through pipes; thermal boundary layer; effect of turbulence; radiative heat transfer, black and grey surfaces, shape factors, network analysis; heat exchanger performance
                    • LMTD and NTU methods

                    Fluid mechanics and thermal sciences: Unit 03


                    Thermodynamics
                    • Zeroth, first, and second laws of thermodynamics; thermodynamic system and processes; Carnot cycle
                    • Irreversibility and availability; behaviour of ideal and real gases, properties of pure substances, calculation of work and heat in ideal processes; analysis of thermodynamic cycles related to energy conversion

                    Fluid mechanics and thermal sciences: Unit 04


                    Applications
                    • Power engineering: Steam tables, Rankine, Brayton cycles with regeneration and reheat
                    • I.C. engine: Air-standard Otto, diesel cycles
                    • Refrigeration and air-conditioning: Vapour refrigeration cycle, heat pumps, gas refrigeration, reverse Brayton cycle; moist air: Psychrometric chart, basic psychrometric processes
                    • Turbomachinery: Pelton-wheel, Francis and Kaplan turbines, impulse and reaction principles, velocity diagrams

                    Manufacturing and industrial engineering: Unit 01


                    Engineering materials
                    • Structure and properties of engineering materials, heat treatment, stress-strain diagrams for engineering materials

                    Manufacturing and industrial engineering: Unit 02


                    Metal casting
                    • Design of patterns, moulds and cores; solidification and cooling; riser and gating design, design considerations

                    Manufacturing and industrial engineering: Unit 03


                    Forming
                    • Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load estimation for bulk (forging, rolling, extrusion, drawing) and sheet (shearing, deep drawing, bending) metal forming processes; principles of powder metallurgy

                    Manufacturing and industrial engineering: Unit 04


                    Joining
                    • Physics of welding, brazing and soldering; adhesive bonding; design considerations in welding
                    • Arc welding, spot welding, submerged arc welding, TIG, MIG, gas welding

                    Manufacturing and industrial engineering: Unit 05


                    Machining and machine tool operations
                    • Mechanics of machining, single and multi-point cutting tools, tool geometry and materials, tool life and wear; economics of machining; principles of non-traditional machining processes; principles of work holding, principles of design of jigs and fixtures

                    Manufacturing and industrial engineering: Unit 06


                    Metrology and inspection
                    • Limits, fits, and tolerances; linear and angular measurements; comparators; gauge design; interferometry; form and finish measurement; alignment and testing methods; tolerance analysis in manufacturing and assembly

                    Manufacturing and industrial engineering: Unit 07


                    Computer integrated manufacturing
                    • Basic concepts of CAD/CAM and their integration tools

                    Manufacturing and industrial engineering: Unit 08


                    Production planning and control
                    • Forecasting models, aggregate production planning, scheduling, materials requirement planning

                    Manufacturing and industrial engineering: Unit 09


                    Inventory control
                    • Deterministic and probabilistic models; safety stock inventory control systems

                    Manufacturing and industrial engineering: Unit 10


                    Operations research
                    • Linear programming, simplex and duplex method, transportation, assignment, network flow models, simple queuing models, PERT and CPM
                    Gujarat PGCET 2024 Electrical Engineering 2024

                    Engineering mathematics: Unit 01


                    Linear algebra
                    • Matrix algebra, systems of linear equations, eigenvalues and eigenvectors

                    Engineering mathematics: Unit 02


                    Calculus
                    • Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl
                    • Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems

                    Engineering mathematics: Unit 03


                    Differential equations
                    • First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, initial and boundary value problems, Laplace transforms
                    • Solutions of one dimensional heat and wave equations and Laplace equation

                    Engineering mathematics: Unit 04


                    Complex variables
                    • Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series

                    Engineering mathematics: Unit 05


                    Probability and Statistics
                    • Definitions of probability and sampling theorems, conditional probability, mean, median, mode and standard deviation, random variables, poisson, normal and binomial distributions

                    Engineering mathematics: Unit 06


                    Numerical methods
                    • Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations

                    Electrical engineering: Unit 01


                    Electric circuits and fields
                    • Network graph, KCL, KVL, node and mesh analysis, transient response of DC and AC networks; sinusoidal steady-state analysis, resonance, ideal current and voltage sources, Thevenin’s, Norton’s and superposition and maximum power transfer theorems
                    • Two-port networks, three phase circuits; Gauss theorem, electric field and potential due to point, line, plane and spherical charge distributions; Ampere’s and Biot-Savart’s laws; inductance; dielectrics; capacitance

                    Electrical engineering: Unit 02


                    Electrical machines
                    • Single phase transformer-equivalent circuit, phasor diagram, tests, regulation and efficiency; three phase transformers-connections, parallel operation; auto-transformer; energy conversion principles; DC machines-types, windings, generator characteristics
                    • Armature reaction and commutation, starting and speed control of motors; three phase induction motors-principles, types, performance characteristics, starting and speed control; single phase induction motors; synchronous machines-performance
                    • Regulation and parallel operation of generators, motor starting, characteristics and applications; servo and stepper motors

                    Electrical engineering: Unit 03


                    Power systems
                    • Basic power generation concepts; transmission line models and performance; cable performance, insulation; corona and radio interference; distribution systems; per-unit quantities; bus impedance and admittance matrices; load flow; voltage control
                    • Power factor correction; economic operation; symmetrical components; fault analysis; principles of over-current, differential and distance protection; solid state relays and digital protection; circuit breakers; system stability concepts
                    • Swing curves and equal area criterion; HVDC transmission and FACTS concepts

                    Electrical engineering: Unit 04


                    Control systems
                    • Principles of feedback; transfer function; block diagrams; steady-state errors; Routh and Nyquist techniques; Bode plots; root loci

                    Electrical engineering: Unit 05


                    Electrical and electronic measurements
                    • Bridges and potentiometers; PMMC, moving iron, dynamometer and induction type instruments; measurement of voltage, current, power, energy and power factor; instrument transformers; digital voltmeters and multimeters; phase, time and frequency measurement
                    • Q-meters; oscilloscopes; potentiometric recorders; error analysis

                    Electrical engineering: Unit 06


                    Analog and digital electronics
                    • Characteristics of diodes, BJT, FET; amplifiers-biasing, equivalent circuit and frequency response; oscillators and feedback amplifiers; operational amplifiers-characteristics and applications; simple active filters; VCOs and timers
                    • Combinational logic circuits; Schmitt trigger; multi-vibrators; sample and hold circuits; A/D and D/A converters; architecture, programming and interfacing

                    Electrical engineering: Unit 07


                    Power electronics and drives
                    • Semiconductor power diodes, transistors, thyristors, triacs, GTOs, MOSFETs, and IGBTs-static characteristics and principles of operation; triggering circuits; phase control rectifiers; bridge converters-fully controlled and half controlled
                    • Principles of choppers and inverters; basis concepts of adjustable speed DC and AC drives
                    Gujarat PGCET 2024 Electronics and Communication 2024

                    Engineering mathematics: Unit 01


                    Linear algebra
                    • Matrix algebra, systems of linear equations, eigenvalues and eigenvectors

                    Engineering mathematics: Unit 02


                    Calculus
                    • Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl
                    • Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems

                    Engineering mathematics: Unit 03


                    Differential equations
                    • First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, initial and boundary value problems, Laplace transforms
                    • Solutions of one dimensional heat and wave equations and Laplace equation

                    Engineering mathematics: Unit 04


                    Complex variables
                    • Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series

                    Engineering mathematics: Unit 05


                    Probability and Statistics
                    • Definitions of probability and sampling theorems, conditional probability, mean, median, mode and standard deviation, random variables, poisson, normal and binomial distributions

                    Engineering mathematics: Unit 06


                    Numerical methods
                    • Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations

                    Electronics and communication engineering: Unit 01


                    Network
                    • Network graphs: Matrices associated with graphs; incidence, fundamental cut set and fundamental circuit matrices
                    • Solution methods: nodal and mesh analysis
                    • Network theorems: Superposition, Thevenin and Norton’s maximum power transfer, Wye-delta transformation
                    • Steady state sinusoidal analysis using phasors
                    • Linear constant coefficient differential equations; time domain analysis of simple RLC circuits, solution of network equations using Laplace transform: Frequency domain analysis of RLC circuits
                    • 2-port network parameters: Driving point and transfer functions
                    • State equations for networks

                    Electronics and communication engineering: Unit 02


                    Electronic devices
                    • Energy bands in silicon, intrinsic and extrinsic silicon
                    • Carrier transport in silicon: Diffusion current, drift current, mobility, and resistivity
                    • Generation and recombination of carriers
                    • P-N junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, p-I-n and avalanche photodiode, basics of LASERs
                    • Device technology: Integrated circuits fabrication process, oxidation, diffusion, ion implantation, photolithography, n-tub, p-tub and twin tub CMOS process

                    Electronics and communication engineering: Unit 03


                    Analog circuits
                    • Small signal equivalent circuits of diodes, BJTs, MOSFETs and analog CMOS
                    • Simple diode circuits, clipping, clamping, rectifier
                    • Biasing and bias stability of transistor and FET amplifiers
                    • Amplifiers: Single-and multi-stage, differential and operational, feedback,and power
                    • Frequency response of amplifiers
                    • Simple op-amp circuits
                    • Filters
                    • Sinusoidal oscillators; criterion for oscillation; single-transistor and op-amp configurations
                    • Function generators and waveshaping circuits, 555 Timers
                    • Power supplies

                    Electronics and communication engineering: Unit 04


                    Digital circuits
                    • Boolean algebra, minimization of Boolean functions; logic gates; digital IC families (DTL, TTL, ECL, MOS, CMOS)
                    • Combinatorial circuits: Arithmetic circuits, code converters, multiplexers, decoders, PROMs and PLAs
                    • Sequential circuits: Latches and flip-flops, counters and shift-registers
                    • Sample and hold circuits, ADCs, DACs
                    • Semiconductor memories
                    • Microprocessor(8085): Architecture, programming, memory and I/O interfacing

                    Electronics and communication engineering: Unit 05


                    Signals and systems
                    • Definitions and properties of Laplace transform, continuous-time and discrete-time Fourier series, continuous-time and discrete-time Fourier transform, DFT and FFT, Z-transform
                    • Sampling theorem
                    • Linear time-invariant (LTI) systems: Definitions and properties; causality, stability, impulse response, convolution, poles and zeros, parallel and cascade structure, frequency response, group delay, phase delay
                    • Signal transmission through LTI systems

                    Electronics and communication engineering: Unit 06


                    Control systems
                    • Basic control system components; block diagrammatic description, reduction of block diagrams
                    • Open loop and closed loop (feedback) systems and stability analysis of these systems
                    • Signal flow graphs and their use in determining transfer functions of systems; transient and steady state analysis of LTI control systems and frequency response
                    • Tools and techniques for LTI control system analysis: Root loci, Routh-Hurwitz criterion, bode and Nyquist plots

                    Electronics and communication engineering: Unit 07


                    Electronic measurements and instrumentation
                    • Basic concepts, standards and error analysis; measurements of basic electrical quantities and parameters; electronic measuring instruments and their principles of working: Analog and digital, comparison, characteristics, application
                    • Transducers; electronic measurements of non electrical quantities like temperature, pressure, humidity, etc; basics of telemetry for industrial use

                    Electronics and communication engineering: Unit 08


                    Electromagnetic
                    • Elements of vector calculus: divergence and curl; Gauss’ and Stokes’ theorems, Maxwell’s equations: Differential and integral forms
                    • Wave equation, Poynting vector
                    • Plane waves: Propagation through various media; reflection and refraction; phase and group velocity; skin depth
                    • Transmission lines: Characteristic impedance; impedance transformation; basics of antennas: Dipole antennas; radiation pattern; antenna gain

                    Electronics and communication engineering: Unit 09


                    Communications
                    • Random signals and noise: Probability, random variables, probability density function, autocorrelation, power spectral density
                    • Analog communication systems: Amplitude and angle modulation and demodulation systems, spectral analysis of these operations, super heterodyne receivers; elements of hardware, realizations of analog communication systems
                    • Signal-to-noise ratio (SNR) calculations for amplitude modulation (AM) and frequency modulation (FM) for low noise conditions
                    • Fundamentals of information theory and channel capacity theorem
                    • Digital communication systems: Pulse code modulation (PCM), differential pulse code modulation (DPCM), digital modulation schemes: Amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK), matched filter receivers
                    • Digital communication systems: Bandwidth consideration and probability of error calculations for these schemes
                    • Basics of TDMA, FDMA and CDMA and GSM
                    • Fundamentals of wireless propagation environment, colour TV transmission and reception systems, basics of DTH, HDTV, plasma and LCD, optical sources, detectors, fibres, optical network components, optical measurements, basics of optical networks

                    Electronics and communication engineering: Unit 10


                    Microwave engineering
                    • Microwave tubes and solid state devices, microwave generation and amplifiers, waveguides and other microwave components and circuits, microstrip circuits, microwave antennas, microwave measurements, masers, lasers; microwave propagation
                    • Microwave communication systems terrestrial and satellite based

                    Electronics and communication engineering: Unit 11


                    Computer engineering
                    • Number systems
                    • Data representation; programming; elements of a high level programming language C/ C++; use of basic data structures; fundamentals of computer architecture; processor design; control unit design; memory organisation, I/O system organization
                    • Microprocessors: Architecture and instruction set of microprocessors 8085 and 8086, assembly language programming
                    • Microprocessor based system design: Typical examples
                    • Personal computers and their typical uses
                    • Microcontroller 8051 family architecture, programming and interface
                    Gujarat PGCET 2024 Instrumentation and Engineering 2024

                    Engineering mathematics: Unit 01


                    Linear algebra
                    • Matrix algebra, systems of linear equations, eigenvalues and eigenvectors

                    Engineering mathematics: Unit 02


                    Calculus
                    • Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl
                    • Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems

                    Engineering mathematics: Unit 03


                    Differential equations
                    • First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, initial and boundary value problems, Laplace transforms
                    • Solutions of one dimensional heat and wave equations and Laplace equation

                    Engineering mathematics: Unit 04


                    Complex variables
                    • Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series

                    Engineering mathematics: Unit 05


                    Probability and Statistics
                    • Definitions of probability and sampling theorems, conditional probability, mean, median, mode and standard deviation, random variables, poisson, normal and binomial distributions

                    Engineering mathematics: Unit 06


                    Numerical methods
                    • Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations

                    Instrumentation engineering: Unit 01


                    Control systems
                    • Feedback principles
                    • Signal flow graphs
                    • Transient response, steady-state-errors
                    • Routh and Nyquist criteria
                    • Bode plot, root loci
                    • Time delay systems
                    • Phase and gain margin
                    • State space representation of systems
                    • Mechanical, hydraulic and pneumatic system components
                    • Servo and step motors, state variable feedback control, time domain and frequency domain, compensation, nonlinear control system

                    Instrumentation engineering: Unit 02


                    Process control
                    • On-off, cascade, P, P-I, P-I-D, feed forward and derivative controller, PLC and DCS, ratio control, heat exchanger, distillation column

                    Instrumentation engineering: Unit 03


                    Analytical, optical and biomedical instrumentation
                    • Mass spectrometry
                    • UV, visible and IR spectrometry
                    • X-ray and nuclear radiation measurements
                    • Optical sources and detectors, LED, laser, photodiode, photo-resistor and their characteristics
                    • Interferometers, applications in metrology
                    • Basics of fiber optics
                    • Biomedical instruments, EEG, ECG and EMG
                    • Clinical measurements
                    • Ultrasonic transducers and Ultrasonography
                    • Principles of Computer Assisted Tomography

                    Instrumentation engineering: Unit 04


                    Transducer and measurement
                    • Resistive, capacitive, inductive and piezoelectric transducers and their signal conditioning
                    • Measurement of displacement, velocity and acceleration (translational and rotational), force, torque, vibration and shock
                    • Measurement of pressure, flow, temperature and liquid level
                    • Measurement of Ph, conductivity, viscosity and humidity

                    Instrumentation engineering: Unit 05


                    Circuit theory
                    • Kirchhoff’s laws, mesh and nodal analysis, circuit theorems
                    • One-port and two-port network functions
                    • Static and dynamic characteristics of Measurement Systems
                    • Error and uncertainty analysis
                    • Statistical analysis of data and curve fitting

                    Instrumentation engineering: Unit 06


                    Analog electronics
                    • Characteristics of diode, BJT, JFET and MOSFET
                    • Diode circuits
                    • Transistors at low and high frequencies, amplifiers, single and multi-stage
                    • Feedback amplifiers
                    • Operational amplifiers, characteristics and circuit configurations
                    • Instrumentation amplifier
                    • Precision rectifier
                    • V-to-i and i-to-v converter
                    • Op-amp based active filters
                    • Oscillators and signal generators

                    Instrumentation engineering: Unit 07


                    Digital electronics
                    • Combinational logic circuits, minimization of boolean functions
                    • IC families, TTL, MOS and CMOS
                    • Arithmetic circuits
                    • Comparators, Schmitt trigger, timers and mono-stable multi-vibrator
                    • Sequential circuits, flip-flops, counters, shift registers
                    • Multiplexer, S/H circuit
                    • Analog-to-digital and digital-to-analog converters
                    • Basics of number system
                    • Microprocessors
                    • Microcontrollers, memory and IO interfacing

                    Instrumentation engineering: Unit 08


                    Signals and systems
                    • Periodic and a periodic signals
                    • Impulse response, transfer function and frequency response of first-and second order systems
                    • Convolution, correlation, and characteristics of linear time invariant systems
                    • Discrete time system, impulse and frequency response
                    • IIR and FIR filters
                    • Amplitude and frequency modulation and demodulation
                    • Sampling theorem, frequency and time division multiplexing
                    • Amplitude shift keying, frequency shift keying and pulse shift keying for digital modulation

                    Instrumentation engineering: Unit 09


                    Electrical and electronic measurements
                    • Bridges and potentiometers, measurement of R, L, and C
                    • Measurements of voltage, current, power, power factor and energy
                    • A.C. and D.C. current probes
                    • Extension of instrument ranges
                    • Digital voltmeter and multimeter
                    • Time, phase, and frequency measurements
                    • Cathode ray oscilloscope
                    • Serial and parallel communication
                    Gujarat PGCET 2024 Chemical Engineering 2024

                    Engineering mathematics: Unit 01


                    Linear algebra
                    • Matrix algebra, systems of linear equations, eigenvalues and eigenvectors

                    Engineering mathematics: Unit 02


                    Calculus
                    • Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl
                    • Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems

                    Engineering mathematics: Unit 03


                    Differential equations
                    • First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, initial and boundary value problems, Laplace transforms
                    • Solutions of one dimensional heat and wave equations and Laplace equation

                    Engineering mathematics: Unit 04


                    Complex variables
                    • Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series

                    Engineering mathematics: Unit 05


                    Probability and Statistics
                    • Definitions of probability and sampling theorems, conditional probability, mean, median, mode and standard deviation, random variables, poisson, normal and binomial distributions

                    Engineering mathematics: Unit 06


                    Numerical methods
                    • Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations

                    Chemical engineering: Unit 01


                    Fluid flow operations and mechanical operations
                    • Fluid static and its application, fluid flow phenomena, basic equations of fluid flow, flow of incompressible fluids in conduits and thin layers, flow of compressible fluids, flow past immersed bodies, transportation and metering of fluid
                    • Dimensional analysis
                    • Solids and its flow properties, size reduction, enlargement, screening, fluidization and conveying, filtration and sedimentation, mixing and agitation, thickening and classification

                    Chemical engineering: Unit 02


                    Chemical process industries
                    • Water, unit processes and applications, coal, industrial gases and carbon, inorganic chemical industries and inorganic acid, cleaner production technology, its uses and applications and processing, chlor-alkali and heavy inorganic industry
                    • Natural products industries, paints, pigments, biotechnology and its application, nitrogenous fertilizer industry

                    Chemical engineering: Unit 03


                    Process calculations and chemical engineering thermodynamics
                    • Basic chemical calculations, material balance with and without chemical reactions, energy balance, conservation of energy and first law of thermodynamics, properties of pure substances, heat effects, second law of thermodynamics
                    • Thermodynamic properties of fluids, thermodynamics of flow process, phase equilibrium, chemical equilibrium, introduction to statistical thermodynamics and prediction method, fugacity

                    Chemical engineering: Unit 04


                    Heat transfer
                    • Conduction convection and radiation
                    • General laws of heat transfer, natural convection, heat transfer with phase change, evaporation, heat exchange equipments, general constructions, extended surface equipment, industrial furnaces

                    Chemical engineering: Unit 05


                    Mass transfer
                    • Molecular and Eddy diffusion in fluids, interphase mass transfer, gas absorption, liquid-liquid extraction and leaching, distillation, humidification and dehumidification, adsorption and ion exchange, drying, crystallization, momentum
                    • Heat and mass transfer analogies, membrane separation techniques

                    Chemical engineering: Unit 06


                    Instrumentation and process control
                    • Laplace transforms, response of first and second order systems, the control systems, controllers and final control elements, closed loop transfer functions, stability, control system design by frequency response, controller mechanism
                    • Setting of different modes of controllers, P and I process and instrumentation diagrams, measurement of process variables, sensors and their dynamics transfer functions and dynamic

                    Chemical engineering: Unit 07


                    Chemical reaction engineering
                    • Kinetics of homogeneous reactions, interpretation of kinetic data single and multiple reactions in ideal reactors, non ideal reactors, residence time distribution, single parameter model, non isothermal reactors, mixing of fluids
                    • Kinetics and design for non catalyzed, heterogeneous system, fluid
                    • Fluid reactions, fluid particle reactions, solid catalyzed reactions, fixed bed reactors, slurry reactors, industrial application

                    Chemical engineering: Unit 08


                    Plant design and economics
                    • Process design aspects ̧ selection of process equipments, process auxiliaries, process utilities, plant location and layout, cost estimation, estimation of total product, depreciation, profitability, cost indexes, rate of return, payback period
                    • Discounted cash flow, optimization in design, economic considerations in process and equipment design

                    Chemical engineering: Unit 09


                    Environment and safety
                    • Various types of environmental pollution in general and in chemical and allied industry in particular, sources and causes of environmental pollution, effect of pollution on environment
                    • Methodologies for environmental pollution prevention (including process technology up gradation, development, etc), fire and explosion hazards rating-HAZOP and HAZAN

                    Chemical engineering: Unit 10


                    Petroleum refining and petrochemicals
                    • Types of crude, evaluation of oil stocks and refinery product, properties of crude and products, processing of petroleum, crude and refinery products, thermal and catalytic cracking processes employed in refineries
                    • Atmospheric and vacuum distillation, treating operations of petroleum products, oil fields and refineries in India, manufacturing process of: Chemicals from C1, C2, C3, C4 compounds, aromatics, polymers, etc, engineering problems

                    Chemical engineering: Unit 11


                    Polymer technology
                    • Monomers, functionality, degree of polymerizations, classification of polymers, glass transition, melting transition, criteria for rubberiness, polymerization methods: Addition and condensation; their kinetics
                    • Metallocene polymers and other newer techniques of polymerization, copolymerization, monomer reactivity ratios and its significance, kinetics, different copolymers, random, alternating, azeotropic copolymerization
                    • Block and graft copolymers, techniques for copolymerization-bulk, solution, suspension, emulsion, Polymer compounding-need and significance, different compounding ingredients for rubber and plastics, crosslinking and vulcanization, vulcanization kinetics

                    Chemical engineering: Unit 12


                    Polymer processing
                    • Compression molding, transfer molding, injection molding, blow molding, reaction injection molding, extrusion, pultrusion, calendaring, rotational molding, thermoforming, rubber processing in two-roll mill, internal mixer
                    Gujarat PGCET 2024 Environment Engineering 2024

                    Engineering mathematics: Unit 01


                    Linear algebra
                    • Matrix algebra, systems of linear equations, eigenvalues and eigenvectors

                    Engineering mathematics: Unit 02


                    Calculus
                    • Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl
                    • Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems

                    Engineering mathematics: Unit 03


                    Differential equations
                    • First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, initial and boundary value problems, Laplace transforms
                    • Solutions of one dimensional heat and wave equations and Laplace equation

                    Engineering mathematics: Unit 04


                    Complex variables
                    • Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series

                    Engineering mathematics: Unit 05


                    Probability and Statistics
                    • Definitions of probability and sampling theorems, conditional probability, mean, median, mode and standard deviation, random variables, poisson, normal and binomial distributions

                    Engineering mathematics: Unit 06


                    Numerical methods
                    • Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations

                    Environmental engineering: Unit 01


                    Gravimetric analysis, titrimetric analysis and instrumental analysis
                    • Significance of Ph, solids, acidity, aklanity, COD, DO, BOD, hardness, sulphate, fluoride, chloride, turbidity , spectrophotometry, colorimetry, chromatography

                    Environmental engineering: Unit 02


                    Water supply and sewage system
                    • Design of water distributions system, design of sewage collection system, sources of water and it’s quality

                    Environmental engineering: Unit 03


                    Water and wastewater treatment
                    • Primary, secondary, and tertiary treatment, screens, grit chamber, coagulation, flocculation, sedimentation, biological treatments of wastewater (aerobic and anaerobic), adsorption, disinfection, filtration, water softening, reverse osmosis
                    • Ion exchange method, sludge treatment and disposal

                    Environmental engineering: Unit 04


                    Air pollution
                    • Sources and effects of air pollutants, criteria air pollutants, effects of meteorological parameters on ambient air quality, thermal inversion, control of particulates, ambient air quality standards and limits

                    Environmental engineering: Unit 05


                    Noise pollution
                    • Noise as a pollutant, measurement of noise, units of expressions, effects of noise, permissible limits

                    Environmental engineering: Unit 06


                    Environmental impact assessment and legislation
                    • Sustainable development, EIA as a four step activity, need for EIA, EIA Notification 2006 and its requirement, EPA 1986, water act 1974, air act 1986, hazardous waste management rules , environmental audit

                    Environmental engineering: Unit 07


                    Industrial water pollution
                    • principles of water pollution control-reduction of strength and volume, neutralization, equalization, discharge standards, effluent standards, stream standards, effluent quality and treatment flow sheet for dairy industry
                    • Textile process house and distillery

                    Environmental engineering: Unit 08


                    Municipal solid waste management
                    • Municipal solid waste characteristic, quantities, composition and generation, engineered system for solid waste management, secured landfill site, energy recovery
                    Gujarat PGCET 2024 Metallurgy 2024

                    Engineering mathematics: Unit 01


                    Linear algebra
                    • Matrix algebra, systems of linear equations, eigenvalues and eigenvectors

                    Engineering mathematics: Unit 02


                    Calculus
                    • Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl
                    • Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems

                    Engineering mathematics: Unit 03


                    Differential equations
                    • First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, initial and boundary value problems, Laplace transforms
                    • Solutions of one dimensional heat and wave equations and Laplace equation

                    Engineering mathematics: Unit 04


                    Complex variables
                    • Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series

                    Engineering mathematics: Unit 05


                    Probability and Statistics
                    • Definitions of probability and sampling theorems, conditional probability, mean, median, mode and standard deviation, random variables, poisson, normal and binomial distributions

                    Engineering mathematics: Unit 06


                    Numerical methods
                    • Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations

                    Metallurgical engineering: Unit 01


                    Thermodynamics and rate processes
                    • Laws of thermodynamics, activity, equilibrium constant, applications to metallurgical systems, solutions, phase equilibria, Ellingham and phase stability diagrams, thermodynamics of surfaces, interfaces and defects, adsorption and segregation
                    • Basic kinetic laws, order of reactions, rate constants and rate limiting steps; principles of electro chemistry-single electrode potential, electrochemical cells and polarizations, aqueous corrosion and protection of metals
                    • Oxidation and high temperature corrosion characterization and control; heat transfer conduction, convection and heat transfer coefficient relations, radiation, mass transfer diffusion and Fick’s laws, mass transfer coefficients
                    • Momentum transfer concepts of viscosity, shell balances, Bernoulli’s equation, friction factors

                    Metallurgical engineering: Unit 02


                    Extractive metallurgy
                    • Minerals of economic importance, comminution techniques, size classification, flotation, gravity and other methods of mineral processing; agglomeration, pyro-hydro-and electro-metallurgical processes; material and energy balances
                    • Principles and processes for the extraction of non-ferrous metals aluminium, copper, zinc, lead, magnesium, nickel, titanium and other rare metals; iron and steel making principles, role structure and properties of slags, metallurgical coke, blast furnace
                    • Direct reduction processes, primary and secondary steel making, ladle metallurgy operations including deoxidation, desulphurization, sulphide shape control, inert gas rinsing and vacuum reactors
                    • Secondary refining processes including AOD, VAD, VOD, VAR and ESR; ingot and continuous casting; stainless steel making, furnaces and refractories

                    Metallurgical engineering: Unit 03


                    Physical metallurgy
                    • Crystal structure and bonding characteristics of metals, alloys, ceramics and polymers, structure of surfaces and interfaces, nano-crystalline and amorphous structures; solid solutions; solidification, phase transformation and binary phase diagrams
                    • Principles of heat treatment of steels, cast iron and aluminum alloys; surface treatments; recovery, recrystallization and grain growth; industrially important ferrous and non-ferrous alloys; elements of X-ray and electron diffraction
                    • Principles of scanning and transmission electron microscopy; industrial ceramics, polymers and composites; electronic basis of thermal, optical, electrical and magnetic properties of materials; electronic and opto-electronic materials

                    Metallurgical engineering: Unit 04


                    Mechanical metallurgy
                    • Elasticity, yield criteria and plasticity; defects in crystals; elements of dislocation theory types of dislocations, slip and twinning, source and multiplication of dislocations, stress fields around dislocations, partial dislocations
                    • Dislocation interactions and reactions; strengthening mechanisms; tensile, fatigue and creep behaviour; super-plasticity; fracture Griffith theory, basic concepts of linear elastic and elasto-plastic fracture mechanics, ductile to brittle transition
                    • Fracture toughness; failure analysis; mechanical testing tension, compression, torsion, hardness, impact, creep, fatigue, fracture toughness and formability

                    Metallurgical engineering: Unit 05


                    Manufacturing processes
                    • Metal casting patterns and moulds including mould design involving feeding, gating and risering, melting, casting practices in sand casting, permanent mould casting, investment casting and shell moulding, casting defects and repair
                    • Hot, warm and cold working of metals, metal forming-fundamentals of metal forming processes of rolling, forging, extrusion, wire drawing and sheet metal forming, defects in forming; metal joining-soldering, brazing and welding
                    • Metal joining-common welding processes of shielded metal arc welding, gas metal arc welding, gas tungsten arc welding and submerged arc welding; welding metallurgy, problems associated with welding of steels and aluminium alloys, defects in welded joints
                    • Powder metallurgy; NDT using dye-penetrant, ultrasonic, radiography, eddy current, acoustic emission and magnetic particle methods
                    Gujarat PGCET 2024 Textile Engineering 2024

                    Engineering mathematics: Unit 01


                    Linear algebra
                    • Matrix algebra, systems of linear equations, eigenvalues and eigenvectors

                    Engineering mathematics: Unit 02


                    Calculus
                    • Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl
                    • Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems

                    Engineering mathematics: Unit 03


                    Differential equations
                    • First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, initial and boundary value problems, Laplace transforms
                    • Solutions of one dimensional heat and wave equations and Laplace equation

                    Engineering mathematics: Unit 04


                    Complex variables
                    • Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series

                    Engineering mathematics: Unit 05


                    Probability and Statistics
                    • Definitions of probability and sampling theorems, conditional probability, mean, median, mode and standard deviation, random variables, poisson, normal and binomial distributions

                    Engineering mathematics: Unit 06


                    Numerical methods
                    • Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations

                    Textile technology/ engineering: Unit 01


                    Textile fibres
                    • Classification of textile fibres; essential requirements of fibre forming polymers; gross and fine structure of natural fibres like cotton, wool and silk
                    • Introduction to important bast fibres; properties and uses of natural and man-made fibres
                    • Molecular architecture, amorphous and crystalline phases, glass transition, plasticization, crystallization, melting, factors affecting Tg and Tm
                    • Polymerization of nylon-6, nylon-66, poly (ethylene terephthalate), polyacrylonitrile and polypropylene; melt spinning processes, characteristic features of PET, polyamide and polypropylene spinning; wet and dry spinning of viscose and acrylic fibres
                    • Post spinning operations such as drawing, heat setting, tow-to-top conversion and different texturing methods
                    • Methods of investigating fibre structure e.g. density, X-ray diffraction, birefringence, optical and electron microscopy, I.R. absorption, thermal methods (DSC, DMA/TMA, TGA); structure and morphology of man-made fibres, mechanical properties of fibres
                    • Moisture sorption in fibres; fibre structure and property correlation

                    Textile technology/ engineering: Unit 02


                    Yarn manufacture and yarn structure and properties
                    • Principles of opening, cleaning and mixing/blending of fibrous materials, working principle of modern opening and cleaning equipments; the technology of carding, carding of cotton and synthetic fibres; drafting operation
                    • Roller and apron drafting principle, causes of mass irregularity introduced by drafting; roller arrangements in drafting systems; principles of cotton combing, combing cycle, mechanism and function, combing efficiency, lap preparation
                    • Recent developments in comber; roving production, mechanism of bobbin building, roving twist; Principle of ring spinning, forces acting on yarn and traveler; modification in ring and traveler designs; mechanism of cop formation, causes of end breakages
                    • Working principle of ring doubler and two for one twister, single and folded yarn twist, properties of double yarns, production of core spun yarn, compact spinning, principle of non conventional methods of yarn production such as rotor spinning
                    • Principle of non conventional methods of yarn production such as air jet spinning, wrap spinning, twistless spinning and friction spinning
                    • Yarn contraction, yarn diameter, specific volume and packing coefficient; twist strength relationship in spun yarns; fibre configuration and orientation in yarn; cause of fibre migration and its estimation, irregularity index, properties of ring
                    • Rotor and air-jet yarns

                    Textile technology/ engineering: Unit 03


                    Fabric manufacture and fabric structure
                    • Principles of cheese and cone winding processes and machines; random and precision winding; package faults and their remedies; yarn clearers and tensioners; different systems of yarn splicing; features of modern cone winding machines
                    • Different types of warping creels; features of modern beam and sectional warping machines; different sizing systems, sizing of spun and filament yarns, modern sizing machines, different sizing ingredients; principles of pirn winding processes and machines
                    • Primary and secondary motions of loom, effect of their settings and timings on fabric formation, fabric appearance and weaving performance; dobby and jacquard shedding; mechanics of weft insertion with shuttle; warp and weft stop motions, warp protection
                    • Weft replenishment; functional principles of weft insertion systems of shuttleless weaving machines, principles of multiphase and circular looms

                    Textile technology/ engineering: Unit 04


                    Principles of weft and warp knitting
                    • Basic weft and warp knitted structures
                    • Basic woven fabric constructions and their derivatives; crepe, cord, terry, gauze, leno and double cloth constructions
                    • Peirce's equations for fabric geometry; elastica model of plain woven fabrics; thickness, cover and maximum sett of woven fabrics

                    Textile technology/ engineering: Unit 05


                    Textile testing
                    • Sampling techniques, sample size and sampling errors
                    • Measurement of fibre length, fineness, crimp, strength and reflectance; measurement of cotton fibre maturity and trash content; HVI and AFIS for fibre testing
                    • Measurement of yarn count, twist and hairiness; tensile testing of fibres, yarns and fabrics; evenness testing of slivers, rovings and yarns; testing equipment for measurement test methods of fabric properties like thickness, compressibility
                    • Measurement test methods of fabric properties like air permeability, drape, crease recovery, tear strength, bursting strength and abrasion resistance
                    • Statistical data analysis of experimental results
                    • Correlation analysis, significance tests and analysis of variance; frequency distributions and control charts

                    Textile technology/ engineering: Unit 06


                    Preparatory processes
                    • Chemistry and practice of preparatory processes for cotton
                    • Mercerization of cotton
                    • Preparatory processes for nylon, polyester and acrylic and polyester/ cotton blends

                    Textile technology/ engineering: Unit 07


                    Dyeing
                    • Classification of dyes
                    • Dyeing of cotton and polyester with appropriate dye classes
                    • Dyeing polyester/ cotton blends
                    • Batchwise and continuous dyeing machines
                    • Dyeing of cotton knitted fabrics and machines used
                    • Methods for determination of wash, light and rubbing fastness
                    • Evaluation of fastness properties with the help of grey scale

                    Textile technology/ engineering: Unit 08


                    Printing
                    • Styles of printing
                    • Printing thickeners including synthetic thickeners
                    • Printing auxiliaries
                    • Printing of cotton with reactive dyes
                    • Printing of polyester with disperse dyes
                    • Methods of dye fixation after printing
                    • Resist and discharge printing of cotton and polyester
                    • Printing of polyester/ cotton blends with disperse/ reactive combination
                    • Transfer printing of polyester
                    • Developments in inkjet printing

                    Textile technology/ engineering: Unit 09


                    Finishing
                    • Mechanical finishing of cotton
                    • Stiff
                    • Soft, wrinkle resistant, water repellent, flame retardant and enzyme (bio-polishing) finishing of cotton
                    • Milling, decatizing and shrink resistant finishing of wool
                    • Antistat finishing of synthetic fibre fabrics
                    • Heat setting of polyester

                    Textile technology/ engineering: Unit 10


                    Energy conservation
                    • Energy crisis, energy conservation in spinning, weaving, processing, humidification and lighting

                    Textile technology/ engineering: Unit 11


                    Pollution
                    • Treatment of textile effluents
                    • Air pollution, water pollution, noise pollution, dust pollution, management of solid hazardous wastes, ISO-14001
                    Gujarat PGCET 2024 Computer Engineering and Information Technology 2024

                    Engineering mathematics: Unit 01


                    Linear algebra
                    • Matrix algebra, systems of linear equations, eigenvalues and eigenvectors

                    Engineering mathematics: Unit 02


                    Calculus
                    • Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl
                    • Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems

                    Engineering mathematics: Unit 03


                    Differential equations
                    • First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, initial and boundary value problems, Laplace transforms
                    • Solutions of one dimensional heat and wave equations and Laplace equation

                    Engineering mathematics: Unit 04


                    Complex variables
                    • Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series

                    Engineering mathematics: Unit 05


                    Probability and Statistics
                    • Definitions of probability and sampling theorems, conditional probability, mean, median, mode and standard deviation, random variables, poisson, normal and binomial distributions

                    Engineering mathematics: Unit 06


                    Numerical methods
                    • Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations

                    Computer engineering and information technology: Unit 01


                    Digital logic
                    • Logic functions, minimization, design and synthesis of combinational and sequential circuits; number representation and computer arithmetic (fixed and floating point)

                    Computer engineering and information technology: Unit 02


                    Computer organization and architecture
                    • Machine instructions and addressing modes, ALU and data-path, CPU control design, memory interface, I/O interface (interrupt and DMA mode), instruction pipelining, cache and main memory, secondary storage

                    Computer engineering and information technology: Unit 03


                    Programming and data structures
                    • Programming in C; functions, recursion, parameter passing, scope, binding; abstract data types, arrays, stacks, queues, linked lists, trees, binary search trees, binary heaps

                    Computer engineering and information technology: Unit 04


                    Algorithms
                    • Analysis, asymptotic notation, notions of space and time complexity, worst and average case analysis; design: Greedy approach, dynamic programming, divide-and conquer; tree and graph traversals, connected components, spanning trees, shortest paths
                    • Hashing, sorting, searching
                    • Asymptotic analysis (best, worst, average cases) of time and space, upper and lower bounds, basic concepts of complexity classes P, NP, NP-hard, NP-complete

                    Computer engineering and information technology: Unit 05


                    Theory of computation
                    • Regular languages and finite automata, context free languages and pushdown automata, recursively enumerable sets and turing machines, undecidability

                    Computer engineering and information technology: Unit 06


                    Compiler design
                    • Lexical analysis, parsing, syntax directed translation, runtime environments, intermediate and target code generation, basics of code optimization
                    • Operating system: Processes, threads, inter-process communication, concurrency, synchronization, deadlock, CPU scheduling, memory management and virtual memory, file systems, I/O systems, protection and security

                    Computer engineering and information technology: Unit 07


                    Databases
                    • ER-model, relational model (relational algebra, tuple calculus), database design (integrity constraints, normal forms), query languages (SQL), file structures (sequential files, indexing, B and-12 -B+ trees), transactions and concurrency control

                    Computer engineering and information technology: Unit 08


                    Information systems and software engineering
                    • Information gathering, requirement and feasibility analysis, data flow diagrams, process specifications, input/ output design, process life cycle, planning and managing the project, design, coding, testing, implementation, maintenance

                    Computer engineering and information technology: Unit 09


                    Computer networks
                    • ISO/OSI stack, LAN technologies (ethernet, token ring), flow and error control techniques, routing algorithms, congestion control, TCP/UDP and sockets, IP(v4), application layer protocols (ICMP, DNS, SMTP, POP, FTP, http)
                    • Basic concepts of hubs, switches, gateways, and routers
                    • Network security basic concepts of public key and private key cryptography, digital signature, firewalls

                    Computer engineering and information technology: Unit 10


                    Web technologies
                    • HTML, XML, basic concepts of client-server computing
                    Gujarat PGCET 2024 Biomedical Engineering 2024

                    Engineering mathematics: Unit 01


                    Linear algebra
                    • Matrix algebra, systems of linear equations, eigenvalues and eigenvectors

                    Engineering mathematics: Unit 02


                    Calculus
                    • Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl
                    • Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems

                    Engineering mathematics: Unit 03


                    Differential equations
                    • First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, initial and boundary value problems, Laplace transforms
                    • Solutions of one dimensional heat and wave equations and Laplace equation

                    Engineering mathematics: Unit 04


                    Complex variables
                    • Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series

                    Engineering mathematics: Unit 05


                    Probability and Statistics
                    • Definitions of probability and sampling theorems, conditional probability, mean, median, mode and standard deviation, random variables, poisson, normal and binomial distributions

                    Engineering mathematics: Unit 06


                    Numerical methods
                    • Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations

                    Biomedical engineering: Unit 01


                    Analog digital and power electronics

                      Biomedical engineering: Unit 02


                      Basics of modelling and control theory

                        Biomedical engineering: Unit 03


                        Microprocessor 8085 and microcontroller 8051

                          Biomedical engineering: Unit 04


                          Basics of communication and networking

                            Biomedical engineering: Unit 05


                            Digital signal processing

                              Biomedical engineering: Unit 06


                              Human anatomy and physiology

                                Biomedical engineering: Unit 07


                                Biomedical transducers, materials and implants

                                  Biomedical engineering: Unit 08


                                  Biomechanics

                                    Biomedical engineering: Unit 10


                                    Medical imaging and image processing
                                      Gujarat PGCET 2024 Mechatronics Engineering 2024

                                      Engineering mathematics: Unit 01


                                      Linear algebra
                                      • Matrix algebra, systems of linear equations, eigenvalues and eigenvectors

                                      Engineering mathematics: Unit 02


                                      Calculus
                                      • Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl
                                      • Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems

                                      Engineering mathematics: Unit 03


                                      Differential equations
                                      • First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, initial and boundary value problems, Laplace transforms
                                      • Solutions of one dimensional heat and wave equations and Laplace equation

                                      Engineering mathematics: Unit 04


                                      Complex variables
                                      • Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series

                                      Engineering mathematics: Unit 05


                                      Probability and Statistics
                                      • Definitions of probability and sampling theorems, conditional probability, mean, median, mode and standard deviation, random variables, poisson, normal and binomial distributions

                                      Engineering mathematics: Unit 06


                                      Numerical methods
                                      • Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations

                                      Mechatronics engineering: Unit 01


                                      Basic mechanical engineering
                                      • Motion and power transmission mechanisms, design of mechanisms, basics of hydraulic and pneumatic systems, properties of gas and steam, heat engines, steam engines, I.C. engines, pumps, compressors, refrigeration and air conditioning

                                      Mechatronics engineering: Unit 02


                                      Basic electrical and electronics engineering
                                      • Fundamentals of electrical and electronics engineering, programmable logic controllers (PLCs), microprocessors, microcontrollers and embedded systems, electric circuits and fields, control systems, electrical and electronic measurement
                                      • Analog and digital electronics, power electronics and drives

                                      Mechatronics engineering: Unit 03


                                      Manufacturing technology
                                      • Metal cutting principles and conventional machining processes, computer aided manufacturing (CAM), basic part programming, measuring and gauging standards, non-traditional manufacturing methods, location theory and jig-fixtures design

                                      Mechatronics engineering: Unit 04


                                      Metal forming processes
                                      • Hot and cold working, metal forming processes like extrusion, drawing, rolling, forging, casting, welding, etc

                                      Mechatronics engineering: Unit 05


                                      Robotics
                                      • robot fundamentals, basic configurations, robot kinematics, trajectory planning, types of end effectors, drive systems, robot sensors, applications in manufacturing

                                      Mechatronics engineering: Unit 06


                                      Computer aided design
                                      • Fundamentals of computer graphics, geometrical modeling, finite element analysis

                                      Mechatronics engineering: Unit 07


                                      Machine vision
                                      • Digital image fundamentals, image enhancement, image compression, image restoration

                                      Mechatronics engineering: Unit 08


                                      Operations research
                                      • Linear programming, transportation model assignment model, network analysis, sequencing problem, decision theory, replacement, queuing model, inventory control

                                      Mechatronics engineering: Unit 09


                                      Material science and metallurgy
                                      • Iron-iron carbon diagram, heat treatment processes, ferrous and non-ferrous metals, non-destructive testing

                                      Mechatronics engineering: Unit 10


                                      Strength of materials
                                      • Stress-strain relationship and elastic constants, Mohr’s circle for plane stress and plane strain, thin cylinders, shear force and bending moment diagrams, bending and shear stresses, deflection of beams, torsion of circular shafts
                                      • Euler’s theory of columns, strain energy methods, thermal stresses
                                      Gujarat PGCET 2024 Food Engineering 2024

                                      Engineering mathematics: Unit 01


                                      Linear algebra
                                      • Matrix algebra, systems of linear equations, eigenvalues and eigenvectors

                                      Engineering mathematics: Unit 02


                                      Calculus
                                      • Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl, vector identities
                                      • Directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems

                                      Engineering mathematics: Unit 03


                                      Differential equations
                                      • First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, initial and boundary value problems, Laplace transforms
                                      • Solutions of one dimensional heat and wave equations and Laplace equation

                                      Engineering mathematics: Unit 04


                                      Complex variables
                                      • Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series

                                      Engineering mathematics: Unit 05


                                      Probability and Statistics
                                      • Definitions of probability and sampling theorems, conditional probability, mean, median, mode and standard deviation, random variables, poisson, normal and binomial distributions

                                      Engineering mathematics: Unit 06


                                      Numerical methods
                                      • Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations

                                      Food engineering: Unit 01


                                      Food chemistry and nutrition
                                      • Carbohydrates: Structure and functional properties of mono-, oligo-, and polysaccharides including starch, cellulose, pectic substances and dietary fibre, gelatinization and retrogradation of starch
                                      • Proteins: Classification and structure of proteins in food, biochemical changes in post mortem and tenderization of muscles
                                      • Lipids: Classification and structure of lipids, rancidity, polymerization and polymorphism
                                      • Pigments: Carotenoids, chlorophylls, anthocyanins, tannins and myoglobin
                                      • Food flavours: Terpenes, esters, aldehydes, ketones and quinones
                                      • Enzymes: Specificity, simple and inhibition kinetics, coenzymes, enzymatic and non-enzymatic browning
                                      • Nutrition: Balanced diet, essential amino acids and essential fatty acids, protein efficiency ratio, water soluble and fat soluble vitamins, role of -15-minerals in nutrition, co-factors, anti-nutrients, nutraceuticals, nutrient deficiency diseases
                                      • Chemical and biochemical changes: Changes occur in foods during different processing

                                      Food engineering: Unit 02


                                      Food microbiology
                                      • Characteristics of microorganisms: Morphology of bacteria, yeast, mold and actinomycetes, spores and vegetative cells, gram-staining
                                      • Microbial growth: Growth and death kinetics, serial dilution technique
                                      • Food spoilage: Spoilage microorganisms in different food products including milk, fish, meat, egg, cereals and their products
                                      • Toxins from microbes: Pathogens and non-pathogens including staphylococcus, salmonella, shigella, escherichia, bacillus, clostridium, and aspergillus genera
                                      • Fermented foods and beverages: Curd, yoghurt, cheese, pickles, soya-sauce, sauerkraut, idli, dosa, vinegar, alcoholic beverages and sausage

                                      Food engineering: Unit 03


                                      Food products technology
                                      • Processing principles: Thermal processing, chilling, freezing, dehydration, addition of preservatives and food additives, irradiation, fermentation, hurdle technology, intermediate moisture foods
                                      • Food packaging and storage: Packaging materials, aseptic packaging, controlled and modified atmosphere storage
                                      • Cereal processing and products: Milling of rice, wheat, and maize, parboiling of paddy, bread, biscuits, extruded products and ready to eat breakfast cereals
                                      • Oil processing: Expelling, solvent extraction, refining and hydrogenation
                                      • Fruits and vegetables processing: Extraction, clarification, concentration and packaging of fruit juice, jam, jelly, marmalade, squash, candies, tomato sauce, ketchup, and puree, potato chips, pickles
                                      • Plantation crops processing and products: Tea, coffee, cocoa, spice, extraction of essential oils and oleoresins from spices
                                      • Milk and milk products processing: Pasteurization and sterilization, cream, butter, ghee, ice-cream, cheese and milk powder
                                      • Processing of animal products: Drying, canning, and freezing of fish and meat; production of egg powder
                                      • Waste utilization: Pectin from fruit wastes, uses of by-products from rice milling
                                      • Food standards and quality maintenance: FPO, PFA, A-Mark, ISI, HACCP, food plant sanitation and cleaning in place (CIP)

                                      Food engineering: Unit 04


                                      Food engineering
                                      • Mass and energy balance; momentum transfer: Flow rate and pressure drop relationships for Newtonian fluids flowing through pipe, Reynolds number
                                      • Heat transfer: Heat transfer by conduction, convection, radiation, heat exchangers
                                      • Mass transfer: Molecular diffusion and Fick's law, conduction and convective mass transfer, permeability through single and multilayer films
                                      • Mechanical operations: Size reduction of solids, high pressure homogenization, filtration, centrifugation, settling, sieving, mixing and agitation of liquid
                                      • Thermal operations: Thermal sterilization, evaporation of liquid foods, hot air drying of solids, spray and freeze-drying, freezing and crystallization
                                      • Mass transfer operations: Psychometric, humidification and dehumidification operations
                                      Gujarat PGCET 2024 Pharmacy 2024

                                      Pharmacy: Unit 01


                                      Natural products
                                      • Pharmacognosy and phytochemistry chemistry, tests, isolation, characterization and estimation of phytopharmaceuticals belonging to the group of alkaloids, glycosides, terpenoids, steroids, bioflavonoids, purines, guggul lipids
                                      • Pharmacognosy of crude drugs that contain the above constituents
                                      • Standardization of raw materials and herbal products
                                      • WHO guidelines
                                      • Quantitative microscopy including modern techniques used for evaluation
                                      • Biotechnological principles and techniques for plant development, tissue culture

                                      Pharmacy: Unit 02


                                      Pharmacology
                                      • General pharmacological principles including toxicology
                                      • Drug interaction
                                      • Pharmacology of drugs acting on central nervous system, cardiovascular system, autonomic nervous system, gastrointestinal system and respiratory system
                                      • Pharmacology of autocoids, hormones, hormone antagonists, chemotherapeutic agents including anticancer drugs
                                      • Bioassays, immunopharmacology
                                      • Drugs acting on the blood and blood forming organs
                                      • Drugs acting on the renal system

                                      Pharmacy: Unit 03


                                      Medicinal chemistry
                                      • Structure, nomenclature, classification, synthesis, SAR and metabolism of the following category of drugs, which are official in Indian pharmacopoeia and British pharmacopoeia
                                      • Introduction to drug design
                                      • Stereochemistry of drug molecules
                                      • Hypnotics and sedatives, analgesics, NSAIDS, neuroleptics, antidepressants, anxiolytics, anticonvulsants, antihistamines, local anaesthetics, cardiovascular drugs antianginal agents vasodilators, adrenergic and cholinergic drugs, cardiotonic agents
                                      • Diuretics, antihypertensive drugs, hypoglycemic agents, antilipemic agents, coagulants, anticoagulants, antiplatelet agents
                                      • Chemotherapeutic agents antibiotics, antibacterials, sulfa drugs. antiprotozoal drugs, antiviral, antitubercular, antimalarial, anticancer, antiamoebic drugs
                                      • Diagnostic agents
                                      • Preparation and storage and uses of official radio pharmaceuticals, vitamins and hormones
                                      • Eicosanoids and their application

                                      Pharmacy: Unit 04


                                      Pharmaceutics
                                      • Development, manufacturing standards Q.C. limits, labeling, as per the pharmacopoeial requirements
                                      • Storage of different dosage forms and new drug delivery systems
                                      • Biopharmaceutics and pharmacokinetics and their importance in formulation
                                      • Formulation and preparation of cosmetics lipstick, shampoo, creams, nail preparations and dentifrices
                                      • Pharmaceutical calculations

                                      Pharmacy: Unit 05


                                      Pharmaceutical jurisprudence
                                      • Drugs and cosmetics act and rules with respect to manufacture, sales and storage
                                      • Pharmacy act
                                      • Pharmaceutical ethics

                                      Pharmacy: Unit 06


                                      Pharmaceutical analysis
                                      • Principles, instrumentation and applications of the following: Absorption spectroscopy (UV, visible and IR)
                                      • Fluorimetry, flame photometry, potentiometry
                                      • Conductometry and polarography
                                      • Pharmacopoeial assays
                                      • Principles of NMR, ESR, mass spectroscopy
                                      • X-ray diffraction analysis and different chromatographic methods

                                      Pharmacy: Unit 07


                                      Biochemistry
                                      • Biochemical role of hormones, vitamins, enzymes, nucleic acids, bioenergetics
                                      • General principles of immunology
                                      • Immunological
                                      • Metabolism of carbohydrate, lipids, proteins
                                      • Methods to determine, kidney and liver function
                                      • Lipid profiles

                                      Pharmacy: Unit 08


                                      Microbiology
                                      • Principles and methods of microbiological assays of the pharmacopoeia
                                      • Methods of preparation of official sera and vaccines
                                      • Serological and diagnostics tests
                                      • Applications of microorganisms in bio conversions and in pharmaceutical industry

                                      Pharmacy: Unit 09


                                      Clinical pharmacy
                                      • Therapeutic drug monitoring dosage regimen in pregnancy and lactation, pediatrics and geriatrics
                                      • Renal and hepatic impairment
                                      • Drug-drug interactions and drug-food interactions, adverse drug reactions
                                      • Medication history, interview and patient counseling
                                      • Candidates appearing for the Gujarat PGCET examination must have a good understanding of the Gujarat PGCET exam pattern and syllabus. The Gujarat PGCET syllabus 2024 will help candidates to know the coverage of the examination. 

                                      • Candidates are advised to solve the Gujarat PGCET previous year papers and mock tests. With the help of the Gujarat PGCET mock test, candidates will be able to achieve the time management required for the examination. 

                                      • Candidates must allot more time to their weaker areas and get their concepts cleared. The analysis of strong and weaker topics will be beneficial for preparation.

                                      ACPC has released the Gujarat PGCET admit card 2024 at the official website. Candidates can download the Gujarat PGCET hall ticket in online mode. Candidates have to use their login credentials to download Gujarat PGCET 2024 admit card. Candidates have to carry the Gujarat PGCET 2024 admit card at the exam hall on the day of the examination. 

                                      Along with Gujarat PGCET admit card/ hall ticket 2024, candidates had to carry a photo identity proof to the exam centre. No candidate will be allowed to appear in the entrance exam without a hall ticket and photo ID proof. Gujarat PGCET 2024 admit card/ hall ticket contains the name of the candidate, date, time and name, and complete address of the exam centre allotted, etc.

                                      How to download Gujarat PGCET hall ticket?

                                      • Visit Gujarat PGCET official website- gujacpc.nic.in
                                      • Click on download Gujarat PGCET hall ticket link
                                      • Enter required login credentials namely application number and password.
                                      • The hall ticket of Gujarat PGCET will be available on the screens.
                                      • Preview and then download the Gujarat PGCET admit card for future reference.

                                      The authority released the Gujarat PGCET 2024 answer key online on the official website. The link to check the answer key of Gujarat PGCET is available online. Candidates can use the answer key to verify their answers and predict the probable marks. Candidates could able to challenge the Gujarat PGCET 2024 answer key by August 6.

                                      The authorities has released the Gujarat PGCET 2024 result in the form of a merit list. Candidates who apply through GATE and those who qualify in the entrance exam of Gujarat PGCET have names under the merit list. The merit list of Gujarat PGCET consists of scores and ranks received by the candidates for Gujarat PGCET admission. Gujarat PGCET result 2024 includes details like the name, rank, acknowledgement number and more.

                                      How to check the Gujarat PGCET result 2024?

                                      • Visit the Gujarat PGCET official website gujacpc.nic.in.
                                      • Click on the direct link to check Gujarat PGCET 2024 results.
                                      • Enter the login credentials namely the application number and password in the required fields.
                                      • Check all the details mentioned in the scorecard.
                                      • Download the Gujarat PGCET scorecard for future reference.

                                      The authorities will release the Gujarat PGCET cutoff 2024 at the official website. The minimum rank required by candidates to get admission into participating institutes will be the cutoff of Gujarat PGCET 2024. ACPC will release Gujarat PGCET 2024 cutoff separately for GATE qualified candidates and Gujarat PGCET exam qualified candidates. 

                                      The authorities will consider the following factors while creating Gujarat PGCET cutoff: 

                                      •  The number of candidates applied
                                      • Number of seats available
                                      • Previous year’s cutoff trends
                                      • Difficulty level of the entrance exam.

                                      The authorities have commenced the Gujarat PGCET 2024 counselling. Gujarat PGCET seat allotment results are provided on the official website. Candidates allotted seats must confirm their admission. After confirming the admission, candidates have to report to the institutes with the required documents. Admission to the participating institutes is based on the non-GATE/GPAT scores.

                                      Gujarat PGCET 2024 list of institutes for M.E/M.Tech programmes

                                      Documents Required at Gujarat PGCET 2024 counselling

                                      Gujarat Post Graduate Common Entrance Test 2024

                                      • HSC exam class XII mark sheet
                                      • Diploma in engineering exam
                                      • Qualifying exam mark sheet
                                      • Final year statement of marks (% equivalent certificate is to be attached if marks statement is in Grade/CPI/CGPA or any other format except in % marks)
                                      • Degree certificate
                                      • GATE/GPAT score card
                                      • School leaving certificate or transfer certificate
                                      • Caste certificate (from candidates belonging to categories other than general)
                                      • Non creamy layer certificate of the family
                                      • Certificate of physical disability
                                      • Certificate of ex-serviceman
                                      • Copy of certificate of in-serviceman issued by the commanding officer

                                      General Information

                                      Contacts

                                      07926566000

                                      Relevant Links

                                      Official Website Link Click Here + 3 more
                                      Chandigarh University M.E Admissions 2025

                                      NAAC A+ Accredited | Scholarships worth INR 170 crores

                                      Chandigarh University Admissions 2025

                                      Ranked #1 Among all Private Indian Universities In QS Asia Rankings 2025 | Scholarships worth 210 CR

                                      Colleges Accepting Gujarat PGCET

                                      Questions related to Gujarat PGCET

                                      Have a question related to Gujarat PGCET ?

                                      Gujarat Technological University (GTU) affiliates several colleges across Gujarat that offer master's programs in Electrical Engineering. Here is a list of some of the prominent colleges under GTU that offer M.E. or M.Tech in Electrical Engineering:

                                      Ahmedabad

                                      1. L.D. College of Engineering

                                      2. Ahmedabad Institute of Technology

                                      3. VGEC (Vishwakarma Government Engineering College)

                                      Surat

                                      4. Sardar Vallabhbhai National Institute of Technology (SVNIT)

                                      5. Sarvajanik College of Engineering and Technology

                                      Vadodara

                                      6. Parul University


                                      Here is a JEE college predictor tool which helps you to predict colleges based on your rank secured in the exam.

                                      JEE COLLEGE PREDICTOR

                                      https://engineering.careers360.com/jee-main-college-predictor?utm_source=qna&utm_medium=jee_cp


                                      Hope this helps you!

                                      Hello,

                                      Yes, Important to appear in PGCET. PGCET is a State level Pharmacy entrance exam. It is for admission to M.Sc Nursing, Master of Physiotherapy, M. Pharm and Pharm-D (Post Baccalaureate) in M.Pharm, Pharm D Colleges in state.


                                      Eligiblity Criteria:

                                      Candidate should have passed B.Pharm Degree examination  or B.Pharm examination of any other recognized Indian University established by law or any other degree courses in Pharmacy in an institutions located in state recognized as Pharmacy Council of India (PCI) or All India Council of Technical Education (A.I.C.T.E.) for this purpose and who has secured not less than 55% of the maximum marks ,50% in case of SC/ST.


                                      Hello,

                                      Admission Committee for Professional Courses, Gujarat (ACPC) will release the notification for Gujarat PGCET 2022. As of now the notification for Gujarat PGCET 2022 is not yet released. The application process will start after the notification is released. SO you have to wait until the notification is released to know the schedule for application. You may use the link below to check the important dates and updates once the notification is released

                                      https://engineering.careers360.com/articles/gujarat-pgcet-application-form

                                      Hii

                                      JNVST Gonda Result 2021 Download with Selected rundown and Waiting rundown in Roll number shrewd for Navodaya Class sixth Result 2021 for NVS Mankapur School situated at Gonda District, Uttar Pradesh.

                                      View All
                                      Back to top