IIT (ISM) Dhanbad M.Tech Admission 2025 -IIT (ISM) Dhanbad released the IIIT(ISM) Dhanbad Mtech 2025 round 7 cutoffs of the COAP counselling. The cutoff pdfs are available on the official website, admission.iitism.ac.in. Only candidates who cleared the cutoffs were given admission to IIT Dhanbad. Admission to IIT Dhanbad is being done through the GATE COAP 2025 portal. Candidates who have successfully registered can check their seat allotment on the COAP portal. The IIT ISM MTech cutoffs for rounds 1 to 6 of the COAP counselling have also been released. The seal allotment results for the IIT ISM are being announced according to the GATE 2025 counselling schedule. Candidates offered seats have to submit their preference by the last date of each phase at gate.iisc.ac.in/coap2025. Candidates who have completed the M.Tech COAP counselling will have to report to IISM Dhanbad by July 21, 2025, tentatively.
This Story also Contains
Overview of IIT (ISM) Dhanbad M.Tech Admission 2025
Important Dates of IIT (ISM) Dhanbad M.Tech Admission 2025
The authority concluded the IIT (ISM) Dhanbad MTech registration on April 19, 2025. Apart from registering on the official website of IISM Dhanbad, applicants also have to register at the COAP portal to participate in the counselling process. The GATE 2025 counselling registrations are available from March 27, 2025.
The authority commenced the M.Tech 2025 registrations on March 20, 2025, at admission.iitism.ac.in. Candidates who qualify for the GATE exam and fulfil the eligibility criteria can apply for IIT (ISM) Dhanbad MTech admission 2025. For a better understanding of IIT (ISM) Dhanbad M.Tech admission 2025, candidates must check the article below.
VIT Bhopal University | M.Tech Admissions 2025
M.Tech admissions open @ VIT Bhopal University | Highest CTC 52 LPA | Apply now
COAP counselling for admission into IIT Dhanbad will be held in online mode. Candidates whose rank will be more than or equal to the IIT Dhanbad GATE cutoff will have a high chance of admission to the course of their choice.
Overview of IIT (ISM) Dhanbad M.Tech Admission 2025
Particulars
Details
Admission Process for
IIT (ISM) Dhanbad M.Tech Admission
Conducting Institution
IIT (ISM), Dhanbad
Total No. of M.Tech Programmes Offered
30
Entrance Exam
GATE
Admission Level
Post Graduation
Important Dates of IIT (ISM) Dhanbad M.Tech Admission 2025
The authorities will announce the complete schedule for IIT Dhanbad M.Tech admission through official notification. The IIT (ISM) Dhanbad registration dates have been released online.
IIT Dhanbad M.Tech 2025 Admission Dates
Events
Dates
Online Application Form Available for Registration and Submission in IIT(ISM)
March 20, 2025
Opening of COAP portal for ISM Dhanbad M.Tech registration
March 27, 2025
Last date of application submission
April 19, 2025
Written Test or Interview (Sponsored candidates only)
June 2025
COAP Counselling results
May 11, 2025 onwards
Candidate reporting at IIT (ISM) Dhanbad
July 21, 2025 (tentative)
Commencement of course
July 24, 2025 (tentative)
GATE COAP 2025 Dates
Events
Dates
COAP Round 1 Seat Allotment
May 17 (10:00 AM) to May 20 (09:00 AM)
COAP Round 2 Seat Allotment
May 23 (10:00 AM) to May 25 (06:00 PM)
COAP Round 3 Seat Allotment
May 29 (10:00 AM) to June 01 (06:00 PM)
COAP Round 4 Seat Allotment
June 05 (10:00 AM) to June 07 (06:00 PM)
COAP Round 5 Seat Allotment
June 11 (10:00 AM) to June 13 (06:00 PM)
COAP Round 6 Seat Allotment
June 17 (10:00 AM) to June 19 (06:00 PM)
COAP Round 7 Seat Allotment
June 23 (10:00 AM) to June 25 (06:00 PM)
COAP Round 8 Seat Allotment
June 29 (10:00 AM) to June 30 (06:00 PM)
COAP Round 9 Seat Allotment
July 04 (10:00 AM) to July 5 (06:00 PM)
COAP Round 10 Seat Allotment
July 09 (10:00 AM) to July 10 (06:00 PM)
Eligibility Criteria for IIT (ISM) Dhanbad M.Tech Admission 2025
The authorities offer M.Tech admission at IIT Dhanbad to candidates who fulfil the minimum eligibility conditions. There are several requisites to be accomplished by the candidates as shown below:
ISM Dhanbad M.Tech Eligibility
Particulars
Details
Candidate Category
Candidates with GATE score
IIT Graduates with B. Tech degree
Sponsored candidates
Eligibility for GATE candidates
To possess a Bachelor's degree in Engineering/Technology or equiva
Candidates must have a valid GATE score
Candidates seeking admission to M. Tech. Programmes of the Institute should have a minimum 60% or CGPA/CPI of 6.0 in 10 point scale (without rounding off) in the qualifying degree for UR/OBC/EWS candidates
*Minimum 55% or CGPA/CPI of 5.5 for SC/ST/PwD candidates
Eligibility for IIT Graduates
Candidates should have completed their B.Tech from one of the IITs
They should have a CGPA 8.00 and above (on a scale of 10)
Eligibility for Sponsored Candidates
A candidate working in an academic institution/PSU/Govt. R&D organizations/Govt. recognized private R&D organizations/industry sponsored by his employer
Candidate should be employed with the respective organization for at least 2 years
They should have qualified GATE/NET/Appropriate National Level Examination
Candidates may evade the GATE/NET qualification if they possess a bachelor's degree from Centrally Funded Technical Institutes (CFTIs) having a CGPA of 8.0 or above
Candidates interested in pursuing an M.Tech at IIT (ISM) Dhanbad have to complete the registration process.
Candidates can apply for multiple programmes for ISM M.Tech admission, 10 preferences at a time. For each programme, candidates have to pay the online application fee of Rs 600 (the amount is Rs 300 for SC/ST/PwD/Women candidates). The application fee is Rs 2000 for candidates of sponsored categories.
IIT Dhanbad M. Tech. Admission 2025 will be through online counselling based on the GATE score and CGPA and Departmental Review (for IIT Graduates)
Participate in COAP counselling for IIT (ISM) Dhanbad MTech admissions
Candidates will have to visit the campus to confirm their ISM Dhanbad M.Tech admission 2025 and pay the requisite admission fee.
GATE Previous Year Question Paper's
Download GATE previous year question papers to understand exam pattern and difficulty level. Practice with these papers to boost your preparation and improve your score.
The authorities are conducting the IIT Dhanbad MTech 2025 registration online. Candidates must check the minimum eligibility conditions before filling out the IIT Dhanbad MTech application form. Candidates need to follow a series of steps provided below:
Step 1 - ISM Dhanbad Application Form- Candidates have to fill out and submit the IIT (ISM) Dhanbad M.Tech 2025 application form in online mode.
Step 2 - COAP Registration- Candidates applying through GATE have to register themselves at the COAP website as well.
Step 3 - Selection of Programmes- While applying for IIT (ISM) Dhanbad M.Tech admission, candidates will be required to select the M.Tech programmes.
Step 4 - Document Upload- Candidates will also be required to upload certain documents while filling the ISM Dhanbad M.Tech application form.
Step 5 - Payment of Fee- Applicants have to pay the requisite application fee depending upon their category
Application Fee for IIT Dhanbad M.Tech 2025
Category
Amount
UR/ EWS/ OBC
Rs 600
SC/ ST/ Women
Rs 300
Sponsored Candidates
Rs 2000
Candidates will need the following documents for verification
Image files of your recent passport size photograph and signature.
Qualifying Degree Marks-Sheet of final semester / final year (7th semester / pre-final year marks-sheet for the ‘appearing candidates’ whose final semester / final year results are pending).
Valid GATE scorecard as indicated in the application form (for GATE candidates).
2-year’s experience certificate for candidates of M. Tech. in Mining Engineering/Opencast Mining (wherever applicable)
Caste certificate/EWS income certificate to avail seat reservation under respective reserved category.
Persons with Disability (PwD) are required to upload a certificate of disability from the authorized medical board attached to one of the following - Vocational Rehabilitation Centre (VRC) for Physically Handicapped persons/ Special Employment Exchange for Physically Handicapped/ Government Hospital (District and State level).
Endorsement certificate from the present employer (for Sponsored candidates).
Salary Bank Account statement/Employees' Provident Fund (EPF) statement (for Sponsored candidates working in private firms/organizations)
There is a fixed number of seats allocated for M.Tech admissions at IIT (ISM) Dhanbad. The seats are distributed in numbers fixed for candidates of various reserved and unreserved categories as reflected in the table below for particular M.Tech courses, as per the previous year notification.
Indian Institute Of Technology (Indian School of Mines)
Dhanbad–826004
Email: mtechadm@iitism.ac.in
Frequently Asked Questions (FAQs)
1.Does IIT Dhanbad offer M.Tech courses?
Yes, IIT (ISM) Dhanbad offers almost 30 M.Tech programmes.
2.When will the authorities release applications for IIT Dhanbad M.Tech admission 2025?
IIT (ISM) Dhanbad M.Tech application form 2025 release date is March 20, 2025.
3.Is filling the application enough for IIT Dhanbad M.Tech admission?
No, candidates will have to apply through the COAP portal along with filling the IIT Dhanbad M.Tech 2025 application form.
4.Is GATE score required for sponsored candidates as well?
Candidates having a bachelor's degree from Centrally Funded Technical Institutes (CFTIs) having a CGPA of 8.0 or above do not need GATE/ NET qualification for IIT Dhanbad M.Tech admission 2025.
5.Where can I check the IIT Dhanbad GATE counselling results?
The GATE 2025 counselling results for IIT Dhanbad will be published on the COAP portal.
6.Is the IIT Dhanbad Mtech cutoff released?
Yes, the authority released rounds 1 to 7 cutoffs of the IIT ISM Dhanbad MTech admissions.
GATE Textile Fiber (TF) focuses on subjects like textile technology, fiber science, yarn & fabric manufacturing, and finishing. The exam includes 65 questions—10 from General Aptitude and 55 from core TF subjects.
Total marks are 100, and the duration is 3 hours. It opens opportunities in PSUs, research, and M.Tech/M.E. admissions in textile-related fields.
Preparing from NITRA books, IIT Delhi lecture notes, and past papers is highly recommended.
It’s great that you're exploring interdisciplinary options like Environmental Engineering at IIT Delhi. The eligibility for MTech programs at IITs usually depends on the specific department requirements. Since your background is in Computer Science and you're planning to apply with a GATE score in Environmental Science and Engineering , it's important to note that IIT Delhi’s Civil Engineering department generally prefers students with core branches such as Civil, Chemical, Environmental, or Biotechnology.Some interdisciplinary and research-oriented programs may consider applicants from varied backgrounds if the student shows strong foundational understanding and interest in environmental applications. However, just qualifying the GATE-ES paper doesn’t automatically guarantee eligibility the department’s brochure or admission portal will clarify this.
You should carefully check the admission brochure and contact the department directly for confirmation if needed. Also, keep checking on the shortlisting criteria they usually publish it each year for transparency.
Yes, you can take admission in M.Tech Computer Science in IITs or NITs through GATE, even if you have completed your B.Tech in Information Technology and Mathematical Innovation from Cluster Innovation Centre, University of Delhi but there are a few things to keep in mind:
Eligibility depends on GATE paper: You need to appear for the GATE Computer Science paper. If your degree has sufficient CS or IT subjects, you’re eligible for this paper.
Each IIT or NIT has its own criteria: While most IITs or NITs accept related branches like IT, some specific institutes might have particular course requirements. So, check the official brochure of each institute.
Admission is based on GATE score and category: A high GATE score improves your chances, especially for top IITs. You’ll also need to apply through COAP for IITs and CCMT for NITs.
So yes, you're eligible, but always cross-check eligibility criteria of the specific institute during admission time
If you're from Bangladesh and currently studying B.Tech in CSE in India, you can appear for the GATE exam in India itself. You don’t need to go back to Bangladesh to write the exam.
Since you're already studying at an Indian institute, you are considered a foreign national studying in India, and you’re allowed to write GATE just like Indian students. You can apply online, choose your exam center in India, and write it here.
Just make sure to have the required documents ready like your valid ID proof, passport or student visa (if asked), and eligibility proof like your college ID or certificate, Everything else in the GATE process remains the same.
With a GATE 2025 score of 352 and OBC rank 21421 in CSE it can be probable for M.Tech in CSE or AI at JNTUA (Jawaharlal Nehru Technological University Anantapur). In the initial rounds it can be challenging as the cutoffs for CSE/AI are usually high, core branches tend to have low cutoffs relative to all other branches and will only get higher in general rounds. If your only applying for CSE and AI only, you might have a foot in the door with later rounds or spot admissions to fill vacancies from those rejected in the initial rounds or those that declined the offer, if they have not confirmed their seats. Again, keep an eye on either CCMT or on at the university level counselling, soon enough it will be quite an academic year!
A flight attendant ensures passenger safety and comfort during flights. Key duties include conducting safety checks, assisting passengers, serving food and drinks, and managing emergencies. They must be well-trained in safety procedures and customer service. A high school diploma is typically required, followed by rigorous training to qualify for the role.
A Flight Engineer monitors and operates an aircraft’s complex systems like engines, fuel, and hydraulics during flight, ensuring optimal performance and safety. They assist pilots with technical issues, conduct inspections, and maintain records. This role requires strong technical knowledge, problem-solving, and communication skills. Training usually involves a degree in aviation or aerospace engineering and specialised certification.
An Aircrew Officer operates and navigates aircraft, ensuring safe flights and compliance with aviation regulations. Key duties include managing flight systems, conducting pre- and post-flight checks, and adhering to safety standards. The role typically requires working five days a week, with around 120 flight hours monthly. Employment may be contractual or permanent, depending on the airline.
An aerospace engineer designs, develops, tests, and maintains aircraft, spacecraft, and related systems. They apply physics and engineering principles to improve aerospace technologies, often working in aviation, defence, or space sectors. Key tasks include designing components, conducting tests, and performing research. A bachelor’s degree is essential, with higher roles requiring advanced study. The role demands analytical skills, technical knowledge, precision, and effective communication.
An air hostess, or flight attendant, ensures passenger safety and comfort during flights. Responsibilities include safety demonstrations, serving meals, managing the cabin, handling emergencies, and post-flight reporting. The role demands strong communication skills, a calm demeanour, and a service-oriented attitude. It offers opportunities to travel and work in the dynamic aviation and hospitality industry.
An aeronautical engineer designs, develops, tests, and maintains aircraft and related systems. They work on components like engines and wings, ensuring performance, safety, and efficiency. The role involves simulations, flight testing, research, and technological innovation to improve fuel efficiency and reduce noise. Aeronautical engineers collaborate with teams in aerospace companies, government agencies, or research institutions, requiring strong skills in physics, mathematics, and engineering principles.
A Safety Manager ensures workplace safety by developing policies, conducting training, assessing risks, and ensuring regulatory compliance. They investigate incidents, manage workers’ compensation, and handle emergency responses. Working across industries like construction and healthcare, they combine leadership, communication, and problem-solving skills to protect employees and maintain safe environments.
An airline pilot operates aircraft to transport passengers and cargo safely. Responsibilities include pre-flight planning, in-flight operations, team collaboration, and post-flight duties. Pilots work in varying schedules and environments, often with overnight layovers. The demand for airline pilots is expected to grow, driven by retirements and industry expansion. The role requires specialized training and adaptability.
Welding Engineer Job Description: A Welding Engineer work involves managing welding projects and supervising welding teams. He or she is responsible for reviewing welding procedures, processes and documentation. A career as Welding Engineer involves conducting failure analyses and causes on welding issues.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
An architect plans and designs buildings, ensuring they are safe, functional, and aesthetically pleasing. They collaborate with clients, engineers, and contractors throughout the construction process. Key skills include creativity, design software proficiency, and knowledge of building codes. In India, a 5-year B.Arch degree and registration with the Council of Architecture are required to practise professionally.
Having a landscape architecture career, you are involved in site analysis, site inventory, land planning, planting design, grading, stormwater management, suitable design, and construction specification. Frederick Law Olmsted, the designer of Central Park in New York introduced the title “landscape architect”. The Australian Institute of Landscape Architects (AILA) proclaims that "Landscape Architects research, plan, design and advise on the stewardship, conservation and sustainability of development of the environment and spaces, both within and beyond the built environment". Therefore, individuals who opt for a career as a landscape architect are those who are educated and experienced in landscape architecture. Students need to pursue various landscape architecture degrees, such as M.Des, M.Plan to become landscape architects. If you have more questions regarding a career as a landscape architect or how to become a landscape architect then you can read the article to get your doubts cleared.
Urban Planning careers revolve around the idea of developing a plan to use the land optimally, without affecting the environment. Urban planning jobs are offered to those candidates who are skilled in making the right use of land to distribute the growing population, to create various communities.
Urban planning careers come with the opportunity to make changes to the existing cities and towns. They identify various community needs and make short and long-term plans accordingly.
A plumber installs, maintains, and repairs water, gas, and waste systems in homes and buildings. Their duties include fixing leaks, installing fixtures, testing systems, ensuring safety compliance, and working with other professionals on projects. They also document repairs and may supervise apprentices. Plumbers play a key role in ensuring public health and the smooth functioning of essential utilities.
Individuals who opt for a career as construction managers have a senior-level management role offered in construction firms. Responsibilities in the construction management career path are assigning tasks to workers, inspecting their work, and coordinating with other professionals including architects, subcontractors, and building services engineers.
Individuals who opt for a career as an environmental engineer are construction professionals who utilise the skills and knowledge of biology, soil science, chemistry and the concept of engineering to design and develop projects that serve as solutions to various environmental problems.
Individuals who opt for a career as geothermal engineers are the professionals involved in the processing of geothermal energy. The responsibilities of geothermal engineers may vary depending on the workplace location. Those who work in fields design facilities to process and distribute geothermal energy. They oversee the functioning of machinery used in the field.
Energy efficiency engineering is a broad field of engineering which deals with energy efficiency, energy services, facility management, plant engineering, and sustainable energy resources. Energy efficiency engineering is one of the most recent engineering disciplines to emerge. The field combines the knowledge and understanding of physics, chemistry, and mathematics, with economic and environmental engineering practices. The main job of individuals who opt for a career as an energy performance engineer is to find the most efficient and sustainable path to operate buildings and manufacturing processes.
Individuals who opt for a career as energy performance engineers apply their understanding and knowledge to increase efficiency and further develop renewable sources of energy. The energy efficiency engineers also examine the use of energy in those procedures and suggest the ways in which systems can be improved.
A geologist attempts to comprehend the historical backdrop of the planet we live on, all the more likely to anticipate the future and clarify current events. He or she analyses the components, deployments, results, physical characteristics, and past of the planet. A geologist examines the landforms and landscapes of the earth in relation to the geology, climatic, and human processes that have shaped them.
A geologist studies earth procedures, for example, seismic tremors, avalanches, floods, and volcanic eruptions to review land and draw up safe structure plans. When he or she researches earth materials, explores metals and minerals, yet in addition search for oil, petroleum gas, water, and strategies to extricate these.
A career as a Petroleum engineer is concerned with activities related to producing petroleum. These products can be in the form of either crude oil or natural gas. Petroleum engineering also requires the exploration and refinement of petroleum resources. Therefore, a career as a petroleum engineer comes up with oil and gas onshore jobs. There are also desk jobs in the petroleum industry. In layman’s terms, a petroleum engineer is a person who finds the best way to drill and extract oil from oil wells. Individuals who opt for a career as petroleum engineer also tries to find new ways to extract oil in an efficient manner.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
A career as a civil engineer is of great importance for the infrastructural growth of the country. It is one of the most popular professions and there is great professional as well as personal growth in this civil engineering career path. There is job satisfaction in this civil engineering career path, but it also comes with a lot of stress, as there are multiple projects that need to be handled and have to be completed on time. Students should pursue physics, chemistry and mathematics in their 10+2 to become civil engineers.
A career as a Transportation Engineer is someone who takes care of people's safety. He or she is responsible for designing, planning and constructing a safe and secure transportation system. The transportation sector has seen a huge transformation and is growing day by day and improving every day.
As a Transport Engineer, he or she needs to solve complex problems such as accidents, costs, traffic flow, and statistics. A Transport Engineer also collaborates for projects with some other companies.
A Loco Pilot operates trains, ensuring safe and timely transport of passengers or goods. Starting as an Assistant Loco Pilot, one can progress to senior roles with experience. The job demands technical knowledge, focus, and adherence to safety protocols. It involves coordination with train staff and may require working long hours under pressure.
Ranked #46 Among Universities in India by NIRF | 1950+ Students Placed 91% Placement, 590+ Recruiters | Last Date to Apply: 30th July | Limited seats available in select program