UPES B.Tech Admissions 2025
ApplyRanked #42 among Engineering colleges in India by NIRF | Highest CTC 50 LPA , 100% Placements
CG PET Exam Pattern & Syllabus 2025 - CGPEB, Raipur will release the syllabus and exam pattern for CG PET 2025 at vyapam.cgstate.gov.in. CGPET 2025 exam pattern and syllabus will contain important topics, test duration, marking scheme and other important details. Candidates who are preparing for the CG PET are advised to first understand the CG PET syllabus and know the topics that have to be studied and paper pattern to score well in the exam. The authority will soon announce the CG PET exam date on the official website.
Preparation is crucial for any exam, including CG PET 2025. Understanding the CG PET exam pattern is essential as it provides insights into the question paper's format, such as the exam mode, types of questions, and section divisions. Candidates aiming to participate in the upcoming CG PET exam can refer to the article below for details on the CG PET syllabus and exam pattern 2025 to enhance their preparation.
The authority will release the CG PET exam pattern and syllabus in online mode only. Candidates are advised to go through the CG PET paper pattern before starting with the preparation for the upcoming session. The following table can be referred to check the CG PET 2025 exam pattern.
Particulars | Details |
Mode of Exam | Offline - Pen and paper-based exam |
Duration of Exam | 3 hours (180 minutes) |
Types of Questions | Objective - Multiple Choice Questions |
Sections | As per CG PET syllabus, there will be three sections:
|
Total Number of Questions | 150 questions |
Sectional Distribution of Questions | Physics - 50 questions Chemistry - 50 questions Mathematics - 50 questions |
CG PET Marking Scheme | 1 mark shall be awarded for each correct response |
CG PET Negative Marking | There is no negative marking |
CG PET total marks | 150 Marks |
The authority releases CG PET 2025 syllabus pdf online at the official website. Candidates can check the syllabus of CG PET 2025 to know the important topics for the exam. CG PET exam syllabus pdf download link will soon be updated on the official website. The CG PET syllabus is divided into three sections Physics, Chemistry, and Physics. The question paper of CG PET 2025 will be framed accordingly and candidates will be judged based on their knowledge of the syllabus of CG PET which has been provided in the tables below.
Topics | Sub Topics |
MEASUREMENT | Units and dimensions, |
Fundamental and derived units, | |
Dimensional analysis | |
S.I. Units | |
KINEMATICS | Linear motion in one and two dimensions |
Cases of uniform velocity and uniform acceleration | |
General relation among position and velocity | |
Uniform circulation motion | |
FORCE AND LAWS OF MOTION | Force and inertia |
Newton”s law of motion | |
Conservation of momentum and energy Static and Kinetic friction | |
Uniform Circular motion | |
WORK ENERGY AND POWER | Work done by force, energy, power |
Elastic collisions | |
Potential energy | |
Gravitational potential energy and its angular conversion to kinetic energy | |
Potential energy of a spring | |
ROTATIONAL MOTION AND MOMENT OF INERTIA | Rigid body rotation, couple, torque, angular momentum conservation of its momentum, |
Moment of inertia, theorems of parallel and perpendicular axis, (Moment of inertia of uniform ring, disc thin rod and cylinder only) | |
GRAVITATION | Acceleration due to gravity and its variation, Universal law of gravitation, motion of satellites, escape velocity., |
Synchronous satellite and polar satellite | |
PROPERTIES OF SOLID AND FLUIDS | Elasticity, Hook”s law, |
Young”s modulus, shear and bulk modulus, | |
Surface energy and surface tension | |
Fluid pressure, atmospheric pressure | |
Viscosity of fluids | |
Kinetic theory of gases | |
Gas laws | |
Kinetic energy and temperature | |
HEAT AND THERMODYNAMICS | Heat |
Temperature | |
Thermometers | |
Specific heats at constant volume and constant pressure | |
Mechanical equivalent of heat isothermal and adiabatic processes | |
Heat conduction in one dimension. | |
Convection and radiation | |
Stefan”s law and Newton”s law of cooling, Zeroth | |
First and Second law of thermodynamics | |
OSCILLATION | Periodic motion, simple harmonic motion |
Oscillations in spring | |
Laws of simple pendulum | |
WAVES | Transverse and longitudinal wave motion, |
Speed of sound, principle of super position, progressive and stationary waves, beats | |
Doppler effect | |
LIGHT | Wave nature of light |
Interference | |
Young”s double slit experiment, velocity of light and Doppler”s effect in light | |
Reflection, refraction, total internal reflection, curved mirrors | |
Lenses, mirror and lens formulae | |
Dispersion in prism, absorption and emission spectra | |
Optical instruments | |
The human eye, defects of vision, magnification and resolving power of telescope and microscope | |
MAGNETISM | Bar magnet, lines of force, torque on a bar magnet due to magnetic field, earth”s magnetic field, tangent galvanometer, vibration magnetometer |
Paramagnetic, di magnetic and ferromagnetic substances | |
ELECTROSTATICS | Coulomb”s law of electrostatics, dielectric constant, electric field and potential due to a point charge, dipole, dipole field, |
Guass’s law in simple geometric. | |
Electrostatic potential, capacitance, parallel plate and spherical capacitors, capacitors in series and parallel, energy of a capacitor | |
CURRENT ELECTRICITY | Electric current |
Ohm”s law | |
Kirchhoff”s laws, resistances in series and parallel, temperature dependence of resistance, wheatstone bridge, and potentiometer. | |
Measurement of voltages and currents | |
EFFECT OF ELECTRIC CURRENT | Magnetic thermal and chemical effect of current |
Electric power heating effects of currents, chemical effects and law of electrolysis, thermoelectricity | |
Biot-Savart law | |
Magnetic fields due to a straight wire, circular loop and solenoid. | |
Force on a moving charge in a magnetic field (Lorentz force) | |
Magnetic moment of a current loop, effect of a uniform magnetic field of a current loop, forces between two currents; moving galvanometer, ammeter and voltmeter. | |
ELECTROMAGNETIC INDUCTION AND ALTERNATING CURRENT | Magnetic flux, |
Electromagnetic induction induced emf Faraday’s law | |
Lenz”s law, self and mutual inductance | |
Alternating currents impedance and reactance growth and decay of current in L-R circuit, elementary idea of dynamo and transformer | |
ELECTRON, PHOTON, AND RADIOACTIVITY | ‘e” and ‘e/m” for an electron, photon |
Einstein”s photoelectric equation, photocells | |
Bohr model of the atom, Hydrogen spectrum | |
Composition of nucleus, atomic masses and isotopes, radioactivity, laws of radioactive decay, decay constant, half life and mean life | |
Mass-energy relation, fission | |
X-Ray : properties and uses | |
SEMICONDUCTOR | Elementary ideas of conductor, semi conductor and insulator, intrinsic and extrinsic semi-conductors, |
Diode, transistor, oscillator, digital circuit and logic gates |
Topics | Sub Topics |
Physical Chemistry | |
ATOMIC STRUCTURE | Constitution of nucleus: Bohr”s atom model: quantum numbers aufbau principle electronic configuration of elements (upto-Kr): De-Broglie relation, shapes of orbital. |
SOLUTIONS | Modes of expressing concentrations of solutions: Types of solutions, Raoults law of colligative properties, non-ideal solution, and abnormal molecular weights |
SOLID STATE | Crystal lattices, unit cells, Structure of ionic compounds close packed structure, Ionic radii, imperfections (Point defects) : properties of solids. |
NUCLEAR CHEMISTRY | Radio active radiations : Half-life, radioactive decay, group displacement law, structure and properties of nucleus : Nuclear reactions, disintegration series, artificial transmutation : Isotopes and their uses : Radio-carbon dating |
CHEMICAL EQUILIBRIUM | Chemical equilibrium, Law of mass action Kp and Kc : Le Chatelier principle and its applications. |
IONIC EQUILIBRIUM | Ionic Equilibria in solutions, Solubility product, common ion effect, theories of acids and base hydrolysis of salts : pH : buffers. |
THERMOCHEMISTRY AND THERMODYNAMICS | Energy changes during a chemical reaction intrinsic energy, enthalpy; First law of thermodynamics : Hess”s law, heats of reactions; Second law of thermodynamics; entropy; free energy; spontaneity of a chemical reaction, free energy change and chemical equilibrium; free energy as energy available for useful work. |
CHEMICAL KINETICS | Rate of a reaction, factors affecting the rate, rate constant, rate expression, order of reaction, first order rate constant-expression and characteristics, Arrhenous equation. |
ELECTROCHEMISTRY | Oxidation, Oxidation number and ion-electron methods, Electrolytic conduction, Faraday”s laws: voltaic cell, electrode potentials, electromotive force, Gibb”s energy and cell potentials, Nernst equation, commercial cells, fuel cell, electrochemical theory of corrosion. |
SURFACE CHEMISTRY | Colloids and Catalysis, Adsorption, Colloids (types preparation and properties), Emulsions, Catalysis: Types and characteristics. |
Inorganic Chemistry | |
PRINCIPLES OF METALLURGICAL OPERATIONS | Furnaces, ore concentration, extraction, purification metallurgies of Na, Al, Fe, Cu, Ag, Zn and Pb and their properties. |
CHEMICAL PERIODICITY | s, p, d, and f-block elements, periodic Table, periodicity, atomic and ionic radii valency, ionization energy, electron affinity, electro negativity, metallic character. |
COMPARATIVE STUDY OF ELEMENTS | Comparative, study of the following families of element: (i) Alkali metals (ii) Alkaline earth metals (iii) Nitrogen family (iv) Oxygen family (v) Halogens (vi) Noble gases. |
TRANSITIONS METALS: | Electronic configuration of 3rd Metal ions, oxidation states, other general characteristic properties, potassium permanganate, potassium dichromate |
COORDINATION COMPOUND | Simple nomenclature, bonding and stability, classification and bonding in organometallics. |
CHEMICAL ANALYSIS | Chemistry involved is simple inorganic qualitative analysis; calculations based on acid base titrimetry |
Organic Chemistry | |
CHEMISTRY OF HYDROCARBON | Calculation of empirical and molecular formulae of organic compounds, Nomenclature of organic compounds, common functional groups, isomerism, Structure and shapes of alkanes, alkenes and benzene |
ALKANES, ALKENES AND ALKYNES | Preparation, properties and uses of alkanes, alkenes and alkynes, benzene, petroleum, cracking, octane number, gasoline additives |
ORGANIC COMPOUNDS BASED ON FUNCTIONAL GROUP CONTAINING NITROGEN | Nomenclature, methods preparation, Chemical properties, correlations of physical properties with structures and uses of Nitro, Amino, Cyana and Diazo compounds. |
ORGANIC COMPOUNDS CONTAINING ORGANIC OXYGENS | Nomenclature, methods preparation, Chemical properties, correlations of physical properties with structures and uses of ethers, aldehydes, ketones, carboxylic acids and their derivatives. |
CHEMISTRY IN DAILY LIFE | Polymers: Classification, method of preparation, properties and uses of polymers, Dyes: Classification, Structure of some important dyes, Chemistry of Drug: Introduction and classification, Chemotherapy, Importance of drug (Antipyretic, Antiseptic, Antibiotic, Anesthetics), Chemistry in food, cosmetics and detergents. |
BIOMOLECULES | Classification, Structures and biological importance of carbohydrates, amino acids, peptides, proteins and enzymes, nucleic acids and lipids |
Topics | Sub Topics |
ALGEBRA | Algebra of complex numbers |
Graphical representation of complex numbers, modulus and argument of complex numbers | |
Square root of a complex number, Triangular inequality | |
Cube roots of unity | |
Arithmetic, geometric and harmonic progression | |
Arithmetic geometric and harmonic means between two numbers | |
Sum of squares and cubes of first Natural numbers | |
Quadratic equations, relations between roots and coefficients, permutations and combinations, binomial theorem (any index) exponential and logarithmic series | |
Determinants up to third order and their order and their elementary properties Matrices types of matrices, adjoint and inverse of matrix, elementary properties of matrices. Partial fraction | |
Application in solving simultaneous equations up to three variables | |
TRIGONOMETRY | Trigonometry functions and their graphs, addition and subtraction formula involving multiple and submultiples angles, general solutions of triangles equations |
Relations between sides and angles of a triangles | |
Solutions of triangles, inverse; trigonometrically functions, height and distance (Simple Problems) | |
CO-ORDINATE GEOMETRY OF TWO DIMENSIONS | Rectangular Cartesian coordinates |
Straight-line pair to straight line, distance of a point from a line angle between two lines | |
Circle, tangents and normal system of circles | |
Conic section Parabola | |
Ellipse and Hyperbola in standard forms with elementary, properties tangents and normal | |
CO-ORDINATE GEOMETRY OF THREE DIMENSIONS | Rectangular co-ordinate system |
Direction cosine and direction ratios, equation of place in standard forms | |
Perpendicular distance from a point, equation of a line angle between two lines | |
VECTOR ALGEBRA | Definition of vector, addition of vectors |
Components in three dimensional space | |
Scalar and vector products | |
Triple products | |
Simple application in geometry and mechanics | |
DIFFERENTIAL CALCULUS | Function polynomial, rational trigonometric, logarithmic and exponential. Inverse function |
Limit continuity and differentiability of functions, differentiation of rational, trigonometric and exponential functions | |
Application of derivative in elementary problems in mechanics increasing and decreasing functions | |
Maxima and Minima of function of one variable | |
Roll’s theorem and mean value theorem | |
INTEGRAL CALCULUS | Integrations as the inverse process of differentiations |
Integration by the parts, by substitution and by partial fraction | |
Definite integral, Areas under simple cures | |
DIFFERENTIAL EQUATIONS | Formulation of differential equation, order and degree |
Solutions of differential equations by separation of variable method | |
Homogeneous linear differential equation of first order | |
STATISTICS | Probability addition and multiplication laws, conditional probability, binomial distribution |
Simple problems in correlation and regression | |
NUMERICAL METHODS | Solution of equation by the methods of bisection, false-positions |
Newton-Raphson | |
Numerical integration by trapezoidal and Simpson’s Rule | |
INFORMATION TECHNOLOGY | Basics of computer and its operations |
Functional components, main parts of computer | |
Input devices | |
Output devices and Secondary storage devices | |
System software | |
Utility software | |
Application software |
The authorities will release the CG Vyapam syllabus along with the official brochure on the official website.
No, CG PET 2025 will be conducted in offline mode only.
There will be three subjects- Physics, Chemistry and Mathematics in the CG PET 2025 exam.
You can find the syllabus for CG PET 2025 on the official website, vyapam.cgstate.gov.in.
The exam will be conducted in offline mode for a duration of 3 hours. There will be three sections- Physics, Chemistry and Mathematics. The total number of questions as per the exam pattern of CG PET 2025 is 150.
Application Date:03 September,2024 - 31 December,2024
Application Date:16 September,2024 - 04 December,2024
Hi there,
Hope you are doing fine.
When applying for admission through the CGPET (Chhattisgarh Pre-Engineering Test) counseling, the validity of a caste certificate from another state can vary based on specific rules and regulations set by the CGPET authorities.
You need to produce a valid caste certificate during the time of counselling and then contact the officials accordingly to know any further information.
If you apply for all india reservation and any other category status then you have to produce the certificate accordingly and then get it attested by the right officials and the authority.
Also, you can contact the official counselling authorities to know more and precise details regarding the counselling and certificates queriers.
Hope this resolves your query.
Hello Manisha
Unfortunately, it's highly unlikely that your son will be able to secure a seat in a Government Engineering College (GEC) in Chhattisgarh with a score of 38.236% in the CG PET 2024 exam.
Why is this the case?
High Competition: Engineering is a popular field, and the number of aspirants far exceeds the available seats in government colleges.
Cut-off Percentages: The cut-off percentages for GECs in Chhattisgarh are typically much higher, especially for sought-after branches.
Factors Affecting Cutoffs: Cutoffs vary based on factors like the total number of applicants, the difficulty level of the exam, and the reservation policies.
What to do next?
While this might be disappointing, there are other options to consider:
Explore Private Colleges: There are several private engineering colleges in Chhattisgarh that might offer admissions based on your son's score.
Consider Other Fields: Based on your son's interests, you could explore other fields like management, pharmacy, or IT.
Improve for Next Year: If your son is determined to pursue engineering, he can focus on improving his score for the next year's entrance exam.
It's essential to have a realistic assessment of the situation and explore alternative paths.
Would you like to explore other options or discuss potential career paths based on your son's interests?
Hello Vivek,
The cut-off marks for admission to Government Engineering College Bilaspur through CGPET (Chhattisgarh Pre Engineering Test) can vary each year based on factors such as the number of applicants, difficulty level of the exam, and seat availability. Typically, the cutoff marks for different branches might be as follows (based on previous years):
CSE: 70-80
ECE: 60-70
Mechanical Engineering: 55-65
Civil Engineering: 50-60
Electrical Engineering: 55-65
Hello aspirant,
DTE, Chhattisgarh will release the CG PET 2024 cutoff on the official website, cgdteraipur.cgstate.gov.in you can keep an eye on the latest notifications from the Website.
For detailed and updated information you can refer to this article: https://engineering.careers360.com/articles/cg-pet-cutoff
Hope it helps!
Hope you are doing good. Also keep in mind that getting a seat will depend on varies factors such as number of students applied for the same branch, performance of the students, category of the students, home state etc.
As per your query here is the college predictor for you :
https://www.careers360.com/cg-pet-college-predictor
Visit this link for get more information about cutoff :
https://engineering.careers360.com/articles/cg-pet-cutoff
Hope this information helps you.
Best Wishes!
A flight attendant is a professional whose primary duty is to ensure the safety and comfort of passengers during an airline flight. An individual who is pursuing a career as a flight attendant is part of the cabin crew for the plane, a team of personnel who operate a commercial, business, or even military aircraft while travelling domestically or internationally.
An individual pursuing a career as a flight attendant is specially trained for the aircraft in which he or she works since passenger safety is their foremost concern. In this article, we will discuss how to become a flight attendant in India or how to become a flight attendant after graduation.
An aerospace engineer is an individual who develops new ideas and technologies that can be used in defence systems, aviation, and spacecraft. He or she not only designs aircraft, spacecraft, satellites, and missiles but also creates test vehicles to ensure optimum functionality. Aerospace engineering is a branch of engineering that deals with the study, design, and development of aerial vehicles such as aircraft and spacecraft.
Aerospace engineering jobs deal with employees who design or build missiles and aircraft for national defence, or spacecraft. Aerospace engineering or aircraft engineering is often referred to as rocket science. The bottom line is that the person who is pursuing a career in aerospace engineering has to deal with multiple teams at different levels and work across various technologies.
A career in the aviation industry always sounds exciting. But, there is no scope for the slightest error as it may cost the lives of many people. A Flight Engineer role comes with the responsibility of monitoring the aircraft engine and control systems while in flight. Whenever the aircraft is away from the home station, he or she is required to perform pre-flight and post-flight inspections
An aircrew officer or airline commanders fly aircraft to provide transportation to passengers or cargo. The aircrew officer operates the engines of aircraft and controls to navigate and fly the airplane. The ability to learn new technologies every time and to stay up-to-date with the changes in the industry is what the aircrew officer should possess.
This could be possible through membership with professional pilot associations. The aircrew officer is also one of the highest-paid professionals and the job is quite coveted. Keep reading to find out what you need to know about how to become aircrew officer.
You may also read career as Airline Pilot.
An air hostess is a flight attendant also known as a cabin crew or steward. An air hostess undertakes several pre-flight, in-flight, and post-flight duties and is responsible for ensuring the safety and comfort of passengers on both national and international flights. A career as an air hostess might be desirable for you if you are excited about a job in which you can help people and travel to exciting places.
Air hostesses play a crucial role in the flight crew, working closely with pilots and ground personnel to provide a safe and comfortable travel experience, even beyond their hospitality responsibilities. Being flexible, having strong communication skills, and being dedicated to the comfort of passengers are all necessary for their dynamic function, which makes them essential to the entire travel experience.
An Aeronautical Engineer job comes with the responsibility of designing aircraft and thrust systems. He or she is employed in aviation, defence or civil aviation industries. Aeronautical Engineer is generally engaged in the design of aircraft and propulsion systems as well as the analysis of building materials and aircraft's aerodynamic performance. The role of an Aeronautical Engineer may involve assembling parts of aircraft, testing and maintaining them.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
Are you searching for an 'airline pilot job description'? An airline pilot or airline commander flies aircraft and helicopters to provide transportation to passengers or cargo. The airline pilot operates the engines of the aircraft and controls them to navigate and fly the airplane. The ability to learn new technologies every time and to stay up-to-date with the changes in the industry is what aviators should possess. The career as airline pilot is also one of the highest-paid professionals and the job is quite coveted.
Welding Engineer Job Description: A Welding Engineer work involves managing welding projects and supervising welding teams. He or she is responsible for reviewing welding procedures, processes and documentation. A career as Welding Engineer involves conducting failure analyses and causes on welding issues.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
Individuals who opt for a career as an environmental engineer are construction professionals who utilise the skills and knowledge of biology, soil science, chemistry and the concept of engineering to design and develop projects that serve as solutions to various environmental problems.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
A Conservation Architect is a professional responsible for conserving and restoring buildings or monuments having a historic value. He or she applies techniques to document and stabilise the object’s state without any further damage. A Conservation Architect restores the monuments and heritage buildings to bring them back to their original state.
A Structural Engineer designs buildings, bridges, and other related structures. He or she analyzes the structures and makes sure the structures are strong enough to be used by the people. A career as a Structural Engineer requires working in the construction process. It comes under the civil engineering discipline. A Structure Engineer creates structural models with the help of computer-aided design software.
Highway Engineer Job Description: A Highway Engineer is a civil engineer who specialises in planning and building thousands of miles of roads that support connectivity and allow transportation across the country. He or she ensures that traffic management schemes are effectively planned concerning economic sustainability and successful implementation.
Are you searching for a Field Surveyor Job Description? A Field Surveyor is a professional responsible for conducting field surveys for various places or geographical conditions. He or she collects the required data and information as per the instructions given by senior officials.
Individuals who opt for a career as geothermal engineers are the professionals involved in the processing of geothermal energy. The responsibilities of geothermal engineers may vary depending on the workplace location. Those who work in fields design facilities to process and distribute geothermal energy. They oversee the functioning of machinery used in the field.
A geologist attempts to comprehend the historical backdrop of the planet we live on, all the more likely to anticipate the future and clarify current events. He or she analyses the components, deployments, results, physical characteristics, and past of the planet. A geologist examines the landforms and landscapes of the earth in relation to the geology, climatic, and human processes that have shaped them.
A geologist studies earth procedures, for example, seismic tremors, avalanches, floods, and volcanic eruptions to review land and draw up safe structure plans. When he or she researches earth materials, explores metals and minerals, yet in addition search for oil, petroleum gas, water, and strategies to extricate these.
Energy efficiency engineering is a broad field of engineering which deals with energy efficiency, energy services, facility management, plant engineering, and sustainable energy resources. Energy efficiency engineering is one of the most recent engineering disciplines to emerge. The field combines the knowledge and understanding of physics, chemistry, and mathematics, with economic and environmental engineering practices. The main job of individuals who opt for a career as an energy performance engineer is to find the most efficient and sustainable path to operate buildings and manufacturing processes.
Individuals who opt for a career as energy performance engineers apply their understanding and knowledge to increase efficiency and further develop renewable sources of energy. The energy efficiency engineers also examine the use of energy in those procedures and suggest the ways in which systems can be improved.
A career as a Petroleum engineer is concerned with activities related to producing petroleum. These products can be in the form of either crude oil or natural gas. Petroleum engineering also requires the exploration and refinement of petroleum resources. Therefore, a career as a petroleum engineer comes up with oil and gas onshore jobs. There are also desk jobs in the petroleum industry. In layman’s terms, a petroleum engineer is a person who finds the best way to drill and extract oil from oil wells. Individuals who opt for a career as petroleum engineer also tries to find new ways to extract oil in an efficient manner.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
A career as a civil engineer is of great importance for the infrastructural growth of the country. It is one of the most popular professions and there is great professional as well as personal growth in this civil engineering career path. There is job satisfaction in this civil engineering career path, but it also comes with a lot of stress, as there are multiple projects that need to be handled and have to be completed on time. Students should pursue physics, chemistry and mathematics in their 10+2 to become civil engineers.
A career as a Transportation Engineer is someone who takes care of people's safety. He or she is responsible for designing, planning and constructing a safe and secure transportation system. The transportation sector has seen a huge transformation and is growing day by day and improving every day.
As a Transport Engineer, he or she needs to solve complex problems such as accidents, costs, traffic flow, and statistics. A Transport Engineer also collaborates for projects with some other companies.
A loco pilot or locomotive pilot is a professional responsible for operating trains. He or she starts, stops, or controls the speed of the train. A locomotive pilot ensures that the train operates according to time schedules and signals. These loco pilots are responsible for carrying people and products to distinct destinations.
A loco pilot has thorough knowledge and understanding of the railway operations, rules, regulations, protocols, and measures to take in times of emergency. Their role is crucial in ensuring passenger and freight trains' smooth and safe operation. Here, in this article, we will discuss everything on how to how to become a loco pilot.
Ranked #42 among Engineering colleges in India by NIRF | Highest CTC 50 LPA , 100% Placements
Recognized as Institute of Eminence by Govt. of India | NAAC ‘A++’ Grade | Upto 75% Scholarships
60+ Years of Education Legacy | UGC & AICTE Approved | Prestigious Scholarship Worth 6 Crores | H-CTC 35 LPA
India's youngest NAAC A++ accredited University | NIRF rank band 151-200 | 2200 Recruiters | 45.98 Lakhs Highest Package
India's Largest University | NAAC A++ Accredited | 100% Placement Record | Highest Package Offered : 3 Cr PA
Hands on Mentoring and Code Coaching | Cutting Edge Curriculum with Real World Application