UPES B.Tech Admissions 2025
Ranked #42 among Engineering colleges in India by NIRF | Highest Package 1.3 CR , 100% Placements | Last Date to Apply: 28th April
JEE Mains 2025 Session 2 Difficulty Level - The Joint Entrance Examination (JEE) Main Session 2 is currently happening. This is the second time in 2025 that the JEE Main is being conducted. JEE Main is the first door of opportunity for students aspiring to get admitted into top colleges like the Indian Institutes of Technology (IITs) and National Institutes of Technology (NITs). As the April 2025 session of JEE Main is happening right now, teachers and students are eager to gauge the JEE Mains 2025 session 2 difficulty level and prepare accordingly well in advance for the upcoming shifts. In this article, let us examine the key highlights of the JEE Mains 2025 Session 2 difficulty level observed in the April session question paper. You will get an understanding of the kind of questions asked in the April session until now. You can check the JEE Main 2025 shift wise answer key here.
JEE Main 2025: Session 2 Result Out; Direct Link
JEE Main 2025: College Predictor | Marks vs Percentile vs Rank
New: JEE Seat Matrix- IITs, NITs, IIITs and GFTI | NITs Cutoff
Latest: Meet B.Tech expert in your city to shortlist colleges
Also check:
The JEE Mains session 2 for April 2 and 3 is over now. We have analyzed the exam and are sharing the analysis based on feedback from the students. We observed that the overall difficulty of JEE Mains Session 2 was average. If you are prepared well, you can tackle the exam in a better way. Let’s see a detailed analysis here:
Physics: Physics was on the tougher side, so its difficulty level was moderate to high. More questions from Modern Physics, Unit and Dimension, and Rotational Motion were asked. The questions on Electrostatics and Thermodynamics were also asked but it was less.
Chemistry: Chemistry’s overall difficulty level was moderate. It was tackable for most of the students. More questions from topics like Coordinate Compounds, Titration and Biomolecules were asked. Questions were also taken from the periodic table and polymer, but they were fewer.
Mathematics: The overall difficulty level of Mathematics was easy. It was easier for those who had studied well. The conics section and Vector & 3D questions were added mostly. Questions from Permutation Combination and Quadratic Equation were also there.
Ranked #42 among Engineering colleges in India by NIRF | Highest Package 1.3 CR , 100% Placements | Last Date to Apply: 28th April
Merit Scholarships | NAAC A+ Accredited | Top Recruiters : E&Y, CYENT, Nvidia, CISCO, Genpact, Amazon & many more
Physics:
The Physics portion in both sessions of the JEE Main 2025 April 4 exam was moderate in difficulty and overall found to be manageable by the majority of students. It had a balanced composition of theoretical and numerical problems, with subjects like Mechanics, Electromagnetism, and Optics being highlighted. Although most questions were straightforward and founded on basic concepts, others needed proper application and solving. The candidates who had grasped concepts in depth and performed a good variety of numericals were able to deal with this section easily.
Chemistry:
Chemistry was comparatively less difficult than other subjects but no less challenging because of its singularities. One of the distinct features of the section was the inclusion of Physics-based concepts in various Chemistry questions, making them more complex in nature compared to the rest of the years. Despite that, the section remained mostly moderate in difficulty and dealt with the broad areas Organic, Inorganic, and Physical Chemistry in an excellent balance. Inorganic Chemistry required a high degree of memorization skills and periodic trends, whereas Organic Chemistry involved reaction mechanisms that assessed conceptual depth.
Mathematics:
Mathematics was the most troublesome subject in both halves of the April 4 exam. The questions were long, conceptually challenging, and time-consuming, requiring attention to detail, logical reasoning, and time management. In comparison with earlier sessions, most students agreed that the level of difficulty had gone up, mainly because of intricate calculations and multi-step questions. Major sections were Integration, Vectors and 3D Geometry, and Algebra (specifically complex numbers).
Physics Analysis
The Physics section in the April 7 morning shift was rated easy to moderate in difficulty. It was relatively simpler than Physics sections from other April shifts and more manageable than Chemistry. The paper closely resembled the difficulty level of the 3rd and 4th April morning shifts. Questions were largely formula-based and conceptually straightforward, favoring students with a strong grasp of fundamentals. Notable topics included 2–3 questions from Modern Physics, 1 from Current Electricity, 2 from Ray Optics, and single questions from Work, Energy & Power, and Rotational Motion. The section offered scoring opportunities with a balanced theoretical and numerical mix.
Mathematics Analysis
Mathematics was of easy to moderate difficulty but was considered lengthy, requiring strong time management. Compared to other April shifts (2nd, 3rd, and 4th), this shift had more time-consuming problems. However, it was easier than the Chemistry section in this shift and quite comparable to the JEE Main 2025 January paper. The majority of questions were calculative and involved topics like Conic Sections (3 questions including parabola and hyperbola), 4 from Vector 3D, and others from Definite Integration and Determinants mixed with Circle. Despite the length, the questions were mostly within the expected pattern and scope.
Chemistry Analysis
The Chemistry section was the toughest of the three in this shift, with a moderate to hard level of difficulty. Compared to both the January 2025 session and the JEE Main 2024, this paper was more challenging and time-consuming. The section leaned heavily on theoretical knowledge, with many statement- and concept-based questions. Physical Chemistry had the highest weightage, followed by Organic and then Inorganic Chemistry. Important topics covered included 1 question each from Solutions, Mole Concept, Diazotization, and Biomolecules, along with 2 from Coordination Compounds. The theoretical depth and question framing made it less straightforward and more demanding.
Physics Analysis
Physics was easy to moderate and depended more on conceptual understanding than solving long numericals. There were some Assertion-Reason type questions that checked logical reasoning. The section was easy for most students and not very long. It had routine topics, so practice as usual came in handy. Many of the candidates believed this section instilled confidence while appearing for the exam, and it was a relief compared to the difficult Maths section. In total, Physics was the best balanced of the three.
Mathematics Analysis
Mathematics was undoubtedly the most challenging and longest section of the paper. There were many questions that had conceptual questions and were multi-step questions. Time management was a real issue here, and even better students felt anxious. A combination of algebra, calculus, and coordinate geometry increased the difficulty. The section assessed both speed and accuracy, and it was crucial to remain cool to prevent dumb errors. Overall, this was the most difficult part and could impact the overall attempt number if not tackled cleverly.
Chemistry Analysis
The Chemistry part was generally moderate and theory-biased. The majority of the questions were NCERT-based, particularly from Inorganic and Coordination Chemistry. Those students who had revised the textbook well could easily manage this part. It was less calculation-intensive, so students could conserve time for other parts. Some questions needed to be read carefully, but generally, it was a scoring and time-saving part. A calm and composed approach worked well here.
Physics Analysis
The Physics section of the April 8 Evening Shift was reported to be easy to moderate in difficulty and stood out as the most scoring among the three subjects. The majority of the questions were formula-based and required direct application of standard concepts, allowing well-prepared students to solve them with speed and confidence. Compared to previous shifts in April, this Physics paper was more approachable and bore resemblance to the Physics section of the April 7 evening shift. Topics such as Modern Physics, Ray Optics, Rotational Motion, Electrostatics, and Semiconductors were given notable weightage. Students who had focused on mastering NCERT concepts and key derivations found this section quite manageable. Additionally, the numerical questions in Section B were straightforward, with minimal calculation traps, making Physics a high-scoring section in this shift.
Mathematics Analysis
The Mathematics section was rated moderately difficult, with a few tricky and time-consuming questions. Although easier than Chemistry, it was slightly tougher than Physics. Students observed that the paper required careful reading of questions and strategic time allocation, as some problems had complex expressions or multi-step solutions. Topics like Conic Sections (especially hyperbola and parabola), Matrices and Determinants, Vector 3D, and Sequence and Series featured prominently. There were also questions from Straight Line and Binomial Theorem, showcasing a balanced mix of algebra and geometry. While not conceptually very tough, the section demanded good calculation speed and presence of mind. Compared to earlier shifts like April 2nd to 4th, this paper was considered easier and more straightforward, offering a fair opportunity to score for students with strong fundamentals.
Chemistry Analysis
Among all subjects, Chemistry was the most challenging in the April 8 Evening Shift. It was described as moderate to hard and notably lengthy, requiring a deeper understanding of theory and concept application. Unlike Physics and Maths, where direct formulas often sufficed, Chemistry questions leaned heavily on conceptual clarity, especially in Organic and Physical Chemistry. Significant questions came from topics like Coordination Compounds, Aldol Condensation, Chemical Equilibrium, and Chemical Bonding. The Physical Chemistry portion was calculative, demanding attention to detail and precise computation. Many students felt that this section tested retention and analytical thinking, and managing time efficiently was crucial. The section's difficulty was perceived to be slightly higher than the January 2025 attempt and more demanding than Chemistry in previous April shifts. Overall, this was the decisive section in determining a student's edge in percentile for this shift.
For a more detailed analysis, check the below links:
JEE Main is conducted twice a year, namely in January and April. While the January session is usually employed as a practice by students, the April session is conducted to be of the most importance because it also has a tendency to break or make a student's opportunity to qualify for JEE Advanced, especially if the student has not fared well in the test conducted in January. So, it is important to understand the JEE Main session 2 difficulty level.
A majority of the students are wondering whether the JEE Mains 2025 session 2 difficulty level will differ from that of the January session. A couple of issues are worth considering for the session 2 of JEE Main 2025:
Greater Difficulty in April: It has been observed over the years that the questions asked in the April session are a little tougher, with more focus on application-based questions that need high knowledge and problem-solving skills.
Variation in Question Paper: As the JEE Main April session is usually attempted by more students, the papers are designed in a manner to have balance across shifts. But the proportion of easy, moderate, and hard questions can be slightly different from the January session, tending to be more challenging sections.
Increased Competition: By April session, students have had a greater duration of time to prepare, which could raise the general level of competition. Consequently, the quality of questions could also be raised to accommodate this greater level of preparedness.
1. Revise Wisely
Give precedence to high-weightage and repeated questions in every topic. Concentrate on your strengths to gain confidence. Instead of touching upon all the chapters, work on accuracy in the most likely to be asked and quick score areas. Make use of self-prepared short notes, summary sheets, and key formula lists for fast revision.
2. Go for Mock Tests and Review Performance
Mock tests daily under exam conditions will increase stamina and accuracy. Practice at the same time interval as the exam to familiarize yourself with the time duration. Emphasize identifying mistakes after each test particularly in Mathematics where time control and endurance are essential. Identify areas where mistakes are being repeated and improve them in particular.
3. Study Chemistry for Rapid Improvements
Chemistry has been at the easier end, but this time there were twists that had to do with concepts of Physics. Concentrate on Inorganic Chemistry: Re-do NCERT completely, particularly periodic trends and key compounds. Organic Chemistry: Focus on named reactions, mechanisms, and sequences of reactions. In Physical Chemistry, practice important numericals and equations. Go over chapters such as Chemical Bonding, Coordination Compounds, Thermodynamics, and Electrochemistry.
4. Be Clear With Physics Concepts
Physics was balanced and moderate with both theoretical and numerical questions. You should go through key topics such as Mechanics, Electrodynamics, and Optics. Practice formula problems and attempt past year questions. Don't leave out Modern Physics, it's usually scoring and conceptually easier. Concept is most important, so don't memorize, apply.
5. Tackle Mathematics
It's necessary to pay attention to chapters such as Vectors, 3D Geometry, Integration, Algebra (Complex Numbers) which were prominently featured. Practice doing wordy and long questions within a time limit. Improve speed and accuracy while working. Do not spend a lot of time on a single problem during the exam. Use tricks and shortcuts only if you're sure about them.
The difficulty level of JEE Main Session 2 is expected to be similar to Session 1. However, slight variations in question types, difficulty, and topic weightage may occur.
JEE Main Session 2 is not necessarily more difficult than Session 1. While there might be slight differences in question patterns, the difficulty level tends to remain consistent across both sessions.
With an OBC-NCL rank of 22384 in JEE Main, you have a good chance of getting into some of the better NITs and IIITs, as well as some other reputable engineering colleges. However, it's important to remember that cutoffs vary by branch and institute.
You could potentially be admitted to NITs like NIT Jalandhar, NIT Durgapur, or NIT Hamirpur.You might have a small chance at some of the newer or less competitive IITs, but this is not a certainty.
But can consider the top private colleges like VIT, SRM, LPU, UPES, SIT Pune,etc.
See college predictor app here -:
Yes, it's possible to get admitted to a private college like PCCOE with an 85.8 percentile in JEE Main.
Check the college predictor here-
last cutt off jack counselling 2024
Hello there,
With a rank of
31,000
in the
SC category
in
JEE Mains
, you have a good chance of getting into some
NITs
,
IIITs
, and other reputed engineering colleges in India, especially from your home state of
Karnataka
. Here’s a general idea of the colleges you may be able to secure admission in:
1.
National Institutes of Technology (NITs)
:
NIT Surathkal (if you have a strong category rank)
NIT Patna
NIT Warangal (though may require higher ranks)
Other NITs in states with relaxed cutoff ranges for SC category.
2.
Indian Institutes of Information Technology (IIITs)
:
IIIT Allahabad
IIIT Kalyani
IIIT Kancheepuram
(part of IIITDM)
3.
Government Funded Technical Institutes (GFTIs)
: Some GFTIs may offer admission with a rank of around 31,000, especially if you opt for courses with slightly lower cutoffs like
Civil
or
Chemical Engineering
.
4.
State Colleges in Karnataka
:
RV College of Engineering
: You may have a chance for some branches.
BMS College of Engineering
: Certain branches like
Electrical or Civil
may be possible.
Dayananda Sagar College of Engineering
: Likely to have openings in some branches.
Key Factors:
Branch Preference
: Engineering branches like Civil, Electrical, or Mechanical might have lower cutoffs compared to Computer Science or Electronics.
State Quota : Since you're from Karnataka, you can also take advantage of state quota reservations, which might slightly lower the cutoff for you.
I would recommend you to use the JEE Mains College Predictor Tool by Careers360 to get the list of possible colleges you can get with your rank or percentile.
To get personalised support for JEE Mains counselling , you can contact through WhatsApp on ( +916005956597 ) to get assistance.
I hope this answer helps you. If you have more queries, feel free to share your questions with us, and we will be happy to assist you.
Thank you, and I wish you all the best in your bright future.
UPES Dehradun JEE Main 2024 expected cutoff percentile:
CSE: 80–85%
IT: 75–80%
Mechanical: 70–75%
Civil: 65–70%
Petroleum/Chemical: 60–65%
These are estimated values. Check the official UPES site for updates.
A flight attendant is a professional whose primary duty is to ensure the safety and comfort of passengers during an airline flight. An individual who is pursuing a career as a flight attendant is part of the cabin crew for the plane, a team of personnel who operate a commercial, business, or even military aircraft while travelling domestically or internationally.
An individual pursuing a career as a flight attendant is specially trained for the aircraft in which he or she works since passenger safety is their foremost concern. In this article, we will discuss how to become a flight attendant in India or how to become a flight attendant after graduation.
An aerospace engineer is an individual who develops new ideas and technologies that can be used in defence systems, aviation, and spacecraft. He or she not only designs aircraft, spacecraft, satellites, and missiles but also creates test vehicles to ensure optimum functionality. Aerospace engineering is a branch of engineering that deals with the study, design, and development of aerial vehicles such as aircraft and spacecraft.
Aerospace engineering jobs deal with employees who design or build missiles and aircraft for national defence, or spacecraft. Aerospace engineering or aircraft engineering is often referred to as rocket science. The bottom line is that the person who is pursuing a career in aerospace engineering has to deal with multiple teams at different levels and work across various technologies.
A career in the aviation industry always sounds exciting. But, there is no scope for the slightest error as it may cost the lives of many people. A Flight Engineer role comes with the responsibility of monitoring the aircraft engine and control systems while in flight. Whenever the aircraft is away from the home station, he or she is required to perform pre-flight and post-flight inspections
An aircrew officer or airline commanders fly aircraft to provide transportation to passengers or cargo. The aircrew officer operates the engines of aircraft and controls to navigate and fly the airplane. The ability to learn new technologies every time and to stay up-to-date with the changes in the industry is what the aircrew officer should possess.
This could be possible through membership with professional pilot associations. The aircrew officer is also one of the highest-paid professionals and the job is quite coveted. Keep reading to find out what you need to know about how to become aircrew officer.
You may also read career as Airline Pilot.
An air hostess is a flight attendant also known as a cabin crew or steward. An air hostess undertakes several pre-flight, in-flight, and post-flight duties and is responsible for ensuring the safety and comfort of passengers on both national and international flights. A career as an air hostess might be desirable for you if you are excited about a job in which you can help people and travel to exciting places.
Air hostesses play a crucial role in the flight crew, working closely with pilots and ground personnel to provide a safe and comfortable travel experience, even beyond their hospitality responsibilities. Being flexible, having strong communication skills, and being dedicated to the comfort of passengers are all necessary for their dynamic function, which makes them essential to the entire travel experience.
An Aeronautical Engineer job comes with the responsibility of designing aircraft and thrust systems. He or she is employed in aviation, defence or civil aviation industries. Aeronautical Engineer is generally engaged in the design of aircraft and propulsion systems as well as the analysis of building materials and aircraft's aerodynamic performance. The role of an Aeronautical Engineer may involve assembling parts of aircraft, testing and maintaining them.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
Are you searching for an 'airline pilot job description'? An airline pilot or airline commander flies aircraft and helicopters to provide transportation to passengers or cargo. The airline pilot operates the engines of the aircraft and controls them to navigate and fly the airplane. The ability to learn new technologies every time and to stay up-to-date with the changes in the industry is what aviators should possess. The career as airline pilot is also one of the highest-paid professionals and the job is quite coveted.
Welding Engineer Job Description: A Welding Engineer work involves managing welding projects and supervising welding teams. He or she is responsible for reviewing welding procedures, processes and documentation. A career as Welding Engineer involves conducting failure analyses and causes on welding issues.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
Individuals who opt for a career as an environmental engineer are construction professionals who utilise the skills and knowledge of biology, soil science, chemistry and the concept of engineering to design and develop projects that serve as solutions to various environmental problems.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
A Conservation Architect is a professional responsible for conserving and restoring buildings or monuments having a historic value. He or she applies techniques to document and stabilise the object’s state without any further damage. A Conservation Architect restores the monuments and heritage buildings to bring them back to their original state.
A Structural Engineer designs buildings, bridges, and other related structures. He or she analyzes the structures and makes sure the structures are strong enough to be used by the people. A career as a Structural Engineer requires working in the construction process. It comes under the civil engineering discipline. A Structure Engineer creates structural models with the help of computer-aided design software.
Highway Engineer Job Description: A Highway Engineer is a civil engineer who specialises in planning and building thousands of miles of roads that support connectivity and allow transportation across the country. He or she ensures that traffic management schemes are effectively planned concerning economic sustainability and successful implementation.
Are you searching for a Field Surveyor Job Description? A Field Surveyor is a professional responsible for conducting field surveys for various places or geographical conditions. He or she collects the required data and information as per the instructions given by senior officials.
Individuals who opt for a career as geothermal engineers are the professionals involved in the processing of geothermal energy. The responsibilities of geothermal engineers may vary depending on the workplace location. Those who work in fields design facilities to process and distribute geothermal energy. They oversee the functioning of machinery used in the field.
A geologist attempts to comprehend the historical backdrop of the planet we live on, all the more likely to anticipate the future and clarify current events. He or she analyses the components, deployments, results, physical characteristics, and past of the planet. A geologist examines the landforms and landscapes of the earth in relation to the geology, climatic, and human processes that have shaped them.
A geologist studies earth procedures, for example, seismic tremors, avalanches, floods, and volcanic eruptions to review land and draw up safe structure plans. When he or she researches earth materials, explores metals and minerals, yet in addition search for oil, petroleum gas, water, and strategies to extricate these.
Energy efficiency engineering is a broad field of engineering which deals with energy efficiency, energy services, facility management, plant engineering, and sustainable energy resources. Energy efficiency engineering is one of the most recent engineering disciplines to emerge. The field combines the knowledge and understanding of physics, chemistry, and mathematics, with economic and environmental engineering practices. The main job of individuals who opt for a career as an energy performance engineer is to find the most efficient and sustainable path to operate buildings and manufacturing processes.
Individuals who opt for a career as energy performance engineers apply their understanding and knowledge to increase efficiency and further develop renewable sources of energy. The energy efficiency engineers also examine the use of energy in those procedures and suggest the ways in which systems can be improved.
A career as a Petroleum engineer is concerned with activities related to producing petroleum. These products can be in the form of either crude oil or natural gas. Petroleum engineering also requires the exploration and refinement of petroleum resources. Therefore, a career as a petroleum engineer comes up with oil and gas onshore jobs. There are also desk jobs in the petroleum industry. In layman’s terms, a petroleum engineer is a person who finds the best way to drill and extract oil from oil wells. Individuals who opt for a career as petroleum engineer also tries to find new ways to extract oil in an efficient manner.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
A career as a civil engineer is of great importance for the infrastructural growth of the country. It is one of the most popular professions and there is great professional as well as personal growth in this civil engineering career path. There is job satisfaction in this civil engineering career path, but it also comes with a lot of stress, as there are multiple projects that need to be handled and have to be completed on time. Students should pursue physics, chemistry and mathematics in their 10+2 to become civil engineers.
A career as a Transportation Engineer is someone who takes care of people's safety. He or she is responsible for designing, planning and constructing a safe and secure transportation system. The transportation sector has seen a huge transformation and is growing day by day and improving every day.
As a Transport Engineer, he or she needs to solve complex problems such as accidents, costs, traffic flow, and statistics. A Transport Engineer also collaborates for projects with some other companies.
A loco pilot or locomotive pilot is a professional responsible for operating trains. He or she starts, stops, or controls the speed of the train. A locomotive pilot ensures that the train operates according to time schedules and signals. These loco pilots are responsible for carrying people and products to distinct destinations.
A loco pilot has thorough knowledge and understanding of the railway operations, rules, regulations, protocols, and measures to take in times of emergency. Their role is crucial in ensuring passenger and freight trains' smooth and safe operation. Here, in this article, we will discuss everything on how to how to become a loco pilot.
Ranked #42 among Engineering colleges in India by NIRF | Highest Package 1.3 CR , 100% Placements | Last Date to Apply: 28th April
Among Top 30 National Universities for Engineering (NIRF 2024) | 30+ Specializations | AI Powered Learning & State-of-the-Art Facilities
1000+ Recruiters | 450+ Patents | 50000+ Alumni network
NAAC A++ Accredited | NIRF 2024 ranked 42nd among Indian universities| 150+ Multidisciplinary Programs | Centre for Career Enhancement
Ranked #1 Among all Private Indian Universities in QS Asia Rankings 2025 | Scholarships worth 210 CR
VIT Chennai B.Tech (Fashion Technology) Admissions 2025 | No entrance for B.Tech fashion Technology