We are offerring the KEAM 2025 paper analysis in this post. Our objective is to assist candidates in comprehending the general structure, the distribution of questions by chapter, the degree of difficulty, and the most commonly asked subjects. By dissecting every part of the paper, we hope to provide insightful information that will inform future preparation tactics and increase confidence for subsequent attempts.The Kerala Engineering/Pharmacy Entrance Examination 2025 Engineering (KEAM) exam is happening on April 23, 25, 26, 27, and 28, with the timing 2:00 PM to 5:00 PM each day. April 23, April 25 and April 26 all shifts are over. Let's examine the KEAM 2025 paper analysis in more detail.
Here we are sharing the paper analysis of KEAM 2025. You can check it here:
KEAM April 23 Analysis
1. Mathematics: While rated as moderately difficult, the Mathematics section on April 23rd seems to have had a varied distribution of question difficulty. The mention of specific easier topics like Sets, Triangle, Differentiation, Probability, and Statistics suggests that students who had prepared these areas well could secure some marks relatively easily. However, the overall moderate rating implies that there were also questions that required deeper conceptual understanding and more involved problem-solving skills, potentially contributing to the perceived length of the section. Time management would still have been a crucial factor in maximizing scores in Mathematics.
2. Physics: The easy rating for Physics on April 23rd indicates that the questions were likely direct and primarily tested fundamental concepts and their application through formulas. The specific mention of manageable topics like Electricity, Atoms, Nuclei, Waves, and Thermodynamics suggests that the core areas of the syllabus were covered in a relatively accessible manner. The emphasis on formula-based questions implies that students with a strong recall of key equations and a basic understanding of the underlying principles would have found this section quite scoring.
UPES B.Tech Admissions 2025
Ranked #42 among Engineering colleges in India by NIRF | Highest Package 1.3 CR , 100% Placements | Last Date to Apply: 29th May
3. Chemistry: The easy perception of the Chemistry section on April 23rd highlights its relative straightforwardness. The mention that students who hadn't fully covered the NCERT syllabus faced some difficulty underscores the continued importance of the NCERT textbooks for KEAM preparation. The note about direct questions in Organic Chemistry suggests that a thorough understanding of basic reactions and nomenclature was likely sufficient. The highlighted topics like Hydrogen, Structure of Atoms, Thermodynamics, and States of Matter being manageable further reinforces the idea that the questions were largely based on fundamental concepts and direct application of knowledge.
KEAM April 25 Analysis
1. Mathematics: This section was largely viewed as moderate to challenging and potentially time-consuming. Students encountered a mix of questions that required direct formula application alongside more complex, application-based problems. Key areas with significant weightage included Calculus, Algebra (especially Complex Numbers and Quadratic Equations), Coordinate Geometry, Vectors, and Probability. Efficient time management and a high degree of accuracy were essential due to the length and the nature of some questions.
2. Physics: The Physics section on April 26th was reported to be of moderate to tough difficulty. A strong understanding of fundamental concepts was crucial, as many questions tested the application of these principles. Frequently tested topics included Laws of Motion, Current Electricity, Thermodynamics, Electrostatics, and Magnetic Effects of Current. Numerical problems, particularly from topics like Work, Energy and Power, and Rotational Motion, were also prevalent and could have posed a challenge in terms of time.
3. Chemistry: Chemistry on April 26th was generally considered to be of average difficulty and relatively more straightforward compared to Physics. A significant number of questions were fact-oriented, especially within Organic and Inorganic Chemistry. Important topics included Chemical Bonding, Coordination Compounds, p-Block Elements, Hydrocarbons, and Biomolecules. Organic Chemistry had a noticeable weightage, with questions often focusing on reaction mechanisms and the transformation of functional groups. Inorganic Chemistry also featured a good number of direct, fact-based questions.
KEAM April 26 Analysis
1. Mathematics: This section was generally considered moderate to challenging and potentially time-consuming. The questions often involved a combination of direct formula application and trickier, application-based problems. Key areas with significant weightage included Calculus, Algebra (especially Complex Numbers and Quadratic Equations), Coordinate Geometry, Vectors, and Probability. Speed and accuracy were crucial due to the length and complexity of some problems.
2. Physics: The Physics section on April 26th was reported to be of moderate to tough level. A strong grasp of fundamental concepts was essential as many questions were concept-based. Important topics frequently tested included Laws of Motion, Current Electricity, Thermodynamics, Electrostatics, and Magnetic Effects of Current. Numerical problems, particularly from Work, Energy and Power, and Rotational Motion, were also common, potentially making time management difficult for some.
3. Chemistry: Chemistry on April 26th was generally considered average and comparatively more straightforward than Physics. Most questions were fact-oriented, especially from Organic and Inorganic Chemistry. Important topics included Chemical Bonding, Coordination Compounds, p-Block Elements, Hydrocarbons, and Biomolecules. Organic Chemistry had a notable weightage, with questions often focusing on reaction mechanisms and the transformation of functional groups. Inorganic Chemistry also had a reasonable number of fact-based questions.
KEAM April 27 Analysis
1. Mathematics: Based on the general pattern observed, the Mathematics section on April 27th was probably moderate to challenging. It might have involved a mix of conceptual questions and problems requiring careful calculation, potentially making it time-consuming for some students.
2. Physics: Similar to the trend, Physics on April 27th was likely of moderate difficulty. The questions would have likely tested both theoretical understanding and the ability to apply concepts to solve numerical problems.
3. Chemistry: Following the pattern of other days, Chemistry on April 27th might have been relatively easier. There's a possibility that a good number of questions were directly from the NCERT syllabus, making it a potentially scoring section for well-prepared students.
KEAM April 28 Analysis
1. Mathematics: Mathematics appears to have presented a moderate level of challenge to the aspirants. While not overwhelmingly difficult in terms of concepts tested, a recurring feedback from students suggests that the section was quite lengthy. This implies that managing time effectively was crucial in this subject. The questions might have involved multiple steps or required careful calculations, potentially testing not just understanding but also the speed and accuracy of the candidates. Students who had practiced extensively with time constraints might have found this section more manageable.
2. Physics: Moving on to Physics, the consensus points towards a difficulty level ranging from easy to moderate. This indicates a balanced paper in physics, likely containing a mix of direct formula-based questions and some that required a bit more conceptual application. It's possible that students who had a solid understanding of the fundamental principles and had practiced a variety of problems would have found this section relatively comfortable. The distribution of difficulty might have been such that a good score was achievable with consistent preparation.
3. Chemistry: Chemistry seems to have been the most approachable section for many students. It's being reported as very easy, with a significant emphasis on questions directly derived from the NCERT syllabus. This highlights the importance of thoroughly covering the NCERT textbooks for KEAM preparation, especially for chemistry. The nature of the questions might have been more factual or directly application-based, allowing students with a strong recall of concepts and reactions to score.
Keep checking for upcoming updates.
KEAM Previous Year Analysis
As KEAM 2025 paper analysis is not available right now, you can check KEAM previous year analysis to understand the trends and questions asked. Here is the analysis:
1. Physics: In past KEAM papers, Physics has always had a moderate to tough level. Questions are generally concept-based and need a very good grasp of fundamentals. Laws of Motion, Current Electricity, Thermodynamics, Electrostatics, and Magnetic Effects of Current are often tested. Numerical questions are regular, particularly from Work, Energy and Power and Rotational Motion. Time management may be tough due to calculation-based questions.
2. Chemistry: Chemistry in KEAM is mostly average and comparatively more straightforward than Physics. Most of the questions are fact-oriented, particularly from Organic and Inorganic Chemistry. Important topics are Chemical Bonding, Coordination Compounds, p-Block Elements, Hydrocarbons, and Biomolecules. The weightage for Organic Chemistry has been on the higher side over the past few years, and most of the questions ask for reaction mechanisms and transformation of functional groups.
3. Mathematics: Mathematics is generally the most time-consuming part and varies from moderate to challenging in terms of difficulty. The paper usually contains a combination of direct formula-based and tricky application questions. Key and commonly asked topics are Calculus, Algebra (particularly Complex Numbers and Quadratic Equations), Coordinate Geometry, Vectors, and Probability. Speed and accuracy are key here, as long calculations can take a lot of time.
We will be sharing KEAM 2025 paper analysis once it is available. You can do KEAM 2025 analysis pdf download once it is available.
Once the KEAM 2025 paper analysis is available, we will share that but for now you can go through the revision tips for the exam:
1. Create a realistic revision schedule: Split time for each subject according to your strengths and weaknesses.
2. Emphasize high-weightage topics: Identify chapters that are consistently present in KEAM papers.
3. Use formula sheets and short notes: Easy reference materials make revision faster and easier to retain.
4. Practice last year papers: Practice in examination conditions to gain speed and accuracy.
5. Review your errors: Know why you answered a question incorrectly and relearn that idea again.
Frequently Asked Questions (FAQs)
1.Is KEAM only for Engineering courses?
No, KEAM is primarily for Engineering, but it also plays a role in the admission process for Architecture and Medical courses (based on NATA and NEET scores respectively).
sorry to hear that. If you didn’t pass the KEAM entrance exam but want to do BTech in Computer Science and Engineering, don’t worry. You can explore these options:
Management Quota or NRI Quota Seats:
Many private colleges offer admission under management or NRI quota without KEAM rank. However, fees might be higher.
Other State or National Level Exams:
Some colleges accept JEE Main scores or other engineering entrance exams. Check if you qualify for admission through those.
Direct Admission in Private Colleges:
Some private colleges offer direct admission based on your 12th marks or other criteria.
Make sure to research colleges, their admission criteria, and fees carefully. Also, keep improving your qualifications for better chances next time!
A
39 percentile in KEAM 2025
roughly translates to a
rank above 90,000 or more
, depending on the total number of candidates and the difficulty level of the exam that year.
Note:
This is just an estimated range. The
official rank list
considers your
normalized scores
from both KEAM and board exams (in the case of Engineering).
To get an accurate rank, wait for the
official rank list by CEE Kerala
after submission of your 12th marks.
If you’re targeting admission in
government engineering colleges
, a higher percentile is usually needed. However, you can still explore
private colleges under management quota
or apply for
courses with lower cut-offs
.
Let me know your stream (Engineering/Pharmacy/etc.) if you need specific advice!
With 26 percentile and 20 normalized scores in KEAM 2025, your rank can be expected to be extremely high (low performance)-almost above 60,000 or even more, as per the historical trends.
KEAM Percentile, Marks, and Rank Relationship
Percentile less than 85 and marks less than 100 out of 600 typically reflect a rank higher than 20,000-often much higher.
A normalized mark of 20 is very low, as the majority of candidates who get engineering seats achieve more than 100–200 marks.
ECE Admission Prospects
Electronics and Communication Engineering (ECE) is a sought-after branch.
For government and premier private colleges, ECE generally closes at much lower ranks (in top 20,000–40,000).
Based on your percentile and normalized mark, chances of your getting ECE in any government or good private college through KEAM counselling are very remote.
With 26 percentile and 20 normalized score, your position will be too high for ECE admission in KEAM colleges. Opt for management quota or diploma streams, or attempt again next year for a higher score.
Your aggregate score of 410.9 puts you in the rank range of 20,000 to 30,000.
Summary
With a KEAM rank score of roughly 411 out of 600, your probable rank will be between 20,000 and 30,000. This is an approximation; actual ranks can differ slightly depending on the competition of the year and normalization.
A flight attendant ensures passenger safety and comfort during flights. Key duties include conducting safety checks, assisting passengers, serving food and drinks, and managing emergencies. They must be well-trained in safety procedures and customer service. A high school diploma is typically required, followed by rigorous training to qualify for the role.
An aerospace engineer designs, develops, tests, and maintains aircraft, spacecraft, and related systems. They apply physics and engineering principles to improve aerospace technologies, often working in aviation, defence, or space sectors. Key tasks include designing components, conducting tests, and performing research. A bachelor’s degree is essential, with higher roles requiring advanced study. The role demands analytical skills, technical knowledge, precision, and effective communication.
A career in the aviation industry always sounds exciting. But, there is no scope for the slightest error as it may cost the lives of many people. A Flight Engineer role comes with the responsibility of monitoring the aircraft engine and control systems while in flight. Whenever the aircraft is away from the home station, he or she is required to perform pre-flight and post-flight inspections
An Aircrew Officer operates and navigates aircraft, ensuring safe flights and compliance with aviation regulations. Key duties include managing flight systems, conducting pre- and post-flight checks, and adhering to safety standards. The role typically requires working five days a week, with around 120 flight hours monthly. Employment may be contractual or permanent, depending on the airline.
An air hostess, or flight attendant, ensures passenger safety and comfort during flights. Responsibilities include safety demonstrations, serving meals, managing the cabin, handling emergencies, and post-flight reporting. The role demands strong communication skills, a calm demeanour, and a service-oriented attitude. It offers opportunities to travel and work in the dynamic aviation and hospitality industry.
An aeronautical engineer designs, develops, tests, and maintains aircraft and related systems. They work on components like engines and wings, ensuring performance, safety, and efficiency. The role involves simulations, flight testing, research, and technological innovation to improve fuel efficiency and reduce noise. Aeronautical engineers collaborate with teams in aerospace companies, government agencies, or research institutions, requiring strong skills in physics, mathematics, and engineering principles.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
An airline pilot operates aircraft to transport passengers and cargo safely. Responsibilities include pre-flight planning, in-flight operations, team collaboration, and post-flight duties. Pilots work in varying schedules and environments, often with overnight layovers. The demand for airline pilots is expected to grow, driven by retirements and industry expansion. The role requires specialized training and adaptability.
Welding Engineer Job Description: A Welding Engineer work involves managing welding projects and supervising welding teams. He or she is responsible for reviewing welding procedures, processes and documentation. A career as Welding Engineer involves conducting failure analyses and causes on welding issues.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
Individuals who opt for a career as an environmental engineer are construction professionals who utilise the skills and knowledge of biology, soil science, chemistry and the concept of engineering to design and develop projects that serve as solutions to various environmental problems.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
A Conservation Architect is a professional responsible for conserving and restoring buildings or monuments having a historic value. He or she applies techniques to document and stabilise the object’s state without any further damage. A Conservation Architect restores the monuments and heritage buildings to bring them back to their original state.
A Structural Engineer designs buildings, bridges, and other related structures. He or she analyzes the structures and makes sure the structures are strong enough to be used by the people. A career as a Structural Engineer requires working in the construction process. It comes under the civil engineering discipline. A Structure Engineer creates structural models with the help of computer-aided design software.
Highway Engineer Job Description: A Highway Engineer is a civil engineer who specialises in planning and building thousands of miles of roads that support connectivity and allow transportation across the country. He or she ensures that traffic management schemes are effectively planned concerning economic sustainability and successful implementation.
A Field Surveyor collects precise land data using tools like GPS and drones to support construction, legal, and environmental projects. They identify boundaries, create maps, and collaborate with engineers. The role requires technical skills, analytical thinking, and physical stamina. Most begin with a diploma or degree in surveying or civil engineering, advancing with experience and specialisation.
Individuals who opt for a career as geothermal engineers are the professionals involved in the processing of geothermal energy. The responsibilities of geothermal engineers may vary depending on the workplace location. Those who work in fields design facilities to process and distribute geothermal energy. They oversee the functioning of machinery used in the field.
A geologist attempts to comprehend the historical backdrop of the planet we live on, all the more likely to anticipate the future and clarify current events. He or she analyses the components, deployments, results, physical characteristics, and past of the planet. A geologist examines the landforms and landscapes of the earth in relation to the geology, climatic, and human processes that have shaped them.
A geologist studies earth procedures, for example, seismic tremors, avalanches, floods, and volcanic eruptions to review land and draw up safe structure plans. When he or she researches earth materials, explores metals and minerals, yet in addition search for oil, petroleum gas, water, and strategies to extricate these.
Energy efficiency engineering is a broad field of engineering which deals with energy efficiency, energy services, facility management, plant engineering, and sustainable energy resources. Energy efficiency engineering is one of the most recent engineering disciplines to emerge. The field combines the knowledge and understanding of physics, chemistry, and mathematics, with economic and environmental engineering practices. The main job of individuals who opt for a career as an energy performance engineer is to find the most efficient and sustainable path to operate buildings and manufacturing processes.
Individuals who opt for a career as energy performance engineers apply their understanding and knowledge to increase efficiency and further develop renewable sources of energy. The energy efficiency engineers also examine the use of energy in those procedures and suggest the ways in which systems can be improved.
A career as a Petroleum engineer is concerned with activities related to producing petroleum. These products can be in the form of either crude oil or natural gas. Petroleum engineering also requires the exploration and refinement of petroleum resources. Therefore, a career as a petroleum engineer comes up with oil and gas onshore jobs. There are also desk jobs in the petroleum industry. In layman’s terms, a petroleum engineer is a person who finds the best way to drill and extract oil from oil wells. Individuals who opt for a career as petroleum engineer also tries to find new ways to extract oil in an efficient manner.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
A career as a civil engineer is of great importance for the infrastructural growth of the country. It is one of the most popular professions and there is great professional as well as personal growth in this civil engineering career path. There is job satisfaction in this civil engineering career path, but it also comes with a lot of stress, as there are multiple projects that need to be handled and have to be completed on time. Students should pursue physics, chemistry and mathematics in their 10+2 to become civil engineers.
A career as a Transportation Engineer is someone who takes care of people's safety. He or she is responsible for designing, planning and constructing a safe and secure transportation system. The transportation sector has seen a huge transformation and is growing day by day and improving every day.
As a Transport Engineer, he or she needs to solve complex problems such as accidents, costs, traffic flow, and statistics. A Transport Engineer also collaborates for projects with some other companies.
A Loco Pilot operates trains, ensuring safe and timely transport of passengers or goods. Starting as an Assistant Loco Pilot, one can progress to senior roles with experience. The job demands technical knowledge, focus, and adherence to safety protocols. It involves coordination with train staff and may require working long hours under pressure.
