UPES B.Tech Admissions 2025
Ranked #42 among Engineering colleges in India by NIRF | Highest Package 1.3 CR , 100% Placements | Last Date to Apply: 15th May
WBJEE Syllabus 2025 - WBJEE Board has released the WBJEE syllabus 2025 online. Aspirants can check the syllabus of WBJEE 2025 on the official website, wbjeeb.nic.in. A direct link for the WBJEE syllabus PDF download is provided below. The West Bengal JEE syllabus includes topics from class 12 Physics, Chemistry and Mathematics subjects. The WBJEE 2025 syllabus consists of 22 chapters in physics, 27 in chemistry and 5 chapters in maths. Applicants must refer to the WBJEE 2025 syllabus to know what topics to study to secure good marks in the West Bengal entrance exam. Candidates must also refer to the WBJEE exam pattern to plan their preparation strategy. WBJEEB is conducting the WBJEE 2025 exam on April 27, 2025.
Direct link to download the WBJEE 2025 Syllabus PDF
The number of questions for each subject in WBJEE exam is:
Along with the complete, the important topics, along with WBJEE syllabus 2025 weightage in each subject is included in this article. Candidates attempting the WBJEE 2025 exam were advised to solve the previous WBJEE question papers to understand the major topics and to understand how to solve the papers in the given time.
Latest- Download WJEE Previous Year Papers | JEE Main Previous Year Papers
The West Bengal Joint Entrance Examinations Board (WBJEEB) has released the WBJEE 2025 syllabus on its official website. Candidates can find the WBJEE syllabus 2025 pdf free download on this page. The syllabus will cover topics such as the Physical World, Measurements, Units & dimensions, Kinematics, Laws of Motion, The motion of the centre of mass, connected systems, Friction, Gravitation, Bulk properties of matter, Viscosity, Thermodynamics, Kinetic theory of gases, Oscillations & Waves and many more. The syllabus of WBJEE is divided into three parts Physics, Chemistry, and Mathematics. Candidates must follow the WBJEE syllabus to secure good marks in the exam.
Ranked #42 among Engineering colleges in India by NIRF | Highest Package 1.3 CR , 100% Placements | Last Date to Apply: 15th May
Recognized as Institute of Eminence by Govt. of India | NAAC ‘A++’ Grade | Upto 75% Scholarships | Applications accepted on through JEE
Here, we have mentioned the topics of Physics asked in the WBJEE 2025 exam. Candidates are advised to study all these topics in detail while preparing for the WBJEE 2025. The following table can be referred to know about the WBJEE Physics syllabus.
S.No. | Physics Topics |
---|---|
1 | Physical World, Measurements, Units & dimensions |
2 | Kinematics |
3 | Laws of Motion |
4 | The motion of the centre of mass, connected systems, Friction |
5 | Gravitation |
6 | Bulk properties of matter |
7 | Viscosity |
8 | Thermodynamics |
9 | Kinetic theory of gases |
10 | Oscillations & Waves |
11 | Electrostatics |
12 | Current Electricity |
13 | Magnetic effect of current |
14 | Magnetics |
15 | Electromagnetic induction & alternating current |
16 | Electromagnetic waves |
17 | Optics I (Ray optics) |
18 | Optics II (Wave Optics) |
19 | Particle nature of light & wave-particle dualism |
20 | Atomic Physics |
21 | Nuclear Physics |
22 | Solid state electronics |
Also Read- Engineering Colleges in India Accepting WBJEE
The following are the topics of Chemistry that candidates must study in detail to prepare for the WBJEE 2025. Some of the important topics of Chemistry for WBJEE 2025 include Chemical Kinetics, p-block Elements, s-block Elements, Chemical Thermodynamics, Coordination Compounds, Redox Reactions, etc. Candidates can check the WBJEE syllabus official website to check entire topics. However, candidates can also refer to the table for the WBJEE Chemistry syllabus 2025.
S.No. | Topics |
---|---|
1 | Atoms, Molecules and Chemical Arithmetic |
2 | Atomic Structure |
3 | Radioactivity and Nuclear Chemistry |
4 | The Periodic Table and Chemical Families |
5 | Chemical Bonding and Molecular Structure |
6 | Coordination Compounds |
7 | Solid State |
8 | Liquid State |
9 | Gaseous State |
10 | Chemical Energetics and Chemical Dynamics |
11 | Physical Chemistry of Solutions |
12 | Ionic and Redox Equilibria |
13 | Hydrogen |
14 | Chemistry of Non-Metallic Elements and their Compounds |
15 | Chemistry of Metals |
16 | Chemistry in Industry |
17 | Polymers |
18 | Surface Chemistry |
19 | Environmental Chemistry |
20 | Chemistry of Carbon Compounds |
21 | Compounds |
22 | Haloalkanes and Haloarenes |
23 | Alcohol |
24 | Aromatic Compounds |
25 | Application Oriented chemistry |
26 | Introduction to Bio-Molecules |
27 | Principles of Qualitative Analysis |
Mathematics is a subject that is purely related to numerical and most of the candidates struggle with the subject. So, it becomes very important to know the correct Mathematics WBJEE 2025 syllabus. The following table can be referred to know the exact WBJEE math syllabus 2025.
S.No. | Topics |
---|---|
1 |
|
2 | Trigonometry |
3 | Coordinate geometry of two dimensions |
4 | Coordinate geometry of three dimensions |
5 |
|
The WBJEE syllabus 2025 weightage highlights the most important topics for Physics, Chemistry, and Mathematics, ranked by their weight from the previous year's exam analysis.
Weightage of Important Topics: WBJEE Physics | |
---|---|
Important topics | Chapter Weightage |
Wave Motion | 5% |
Nuclear Physics | 5% |
Solids & Semiconductor Devices | 5% |
Modern Physics – Atomic Models | 5% |
Laws of Motion | 4% |
Rotational Motion | 4% |
Current Electricity | 7% |
Heat and Thermodynamics | 6% |
Electrostatics | 6% |
Magnetic Effects of Current and Magmatism | 6% |
Work Energy Power | 5% |
Simple Harmonic Motion | 5% |
Physics of Nucleolus | 5% |
Merit Scholarships | NAAC A+ Accredited | Top Recruiters : E&Y, CYENT, Nvidia, CISCO, Genpact, Amazon & many more
100% Placement Record | Highest CTC 54 LPA | NAAC A++ Accredited | Ranked #65 in India by NIRF Ranking 2024 | JEE & JET Scores Accepted | Last date to Apply: 15th May
Weightage of Important Topics: WBJEE Chemistry | |
---|---|
Important Topics | Chapter Weightage |
p- Block Elements | 6% |
Redox Reactions | 5% |
Ionic Equilibrium | 4% |
Chemical Equilibrium | 4% |
Coordination Compounds | 4% |
Carboxylic Acids & Derivatives | 4% |
Alcohol Phenol Ether | 4% |
Chemical Thermodynamics | 4% |
Chemical Kinetics | 7% |
Chemical Bonding | 6% |
Transition Elements (d & f block) | 6% |
S block elements | 6% |
Organic Chemistry | 6% |
Weightage of Important Topics: WBJEE Mathematics | |
---|---|
Important Topics | Chapter wise weightage |
Vectors | 7% |
Probability | 7% |
3-D Geometry | 6% |
Matrices & Determinants | 5% |
Limits | 5% |
Indefinite Integration | 5% |
Sets, Relation & Functions | 5% |
Definite Integration | 5% |
Theory of Equations | 4% |
Permutation & Combination | 4% |
Complex Numbers | 4% |
After understanding the WBJEE 2025 syllabus, candidates should also note down important topics for the exam that had the most weightage in previous years. Knowing the WBJEE chapter-wise weightage 2025 will help the candidate figure out the most important topic in the particular chapter. Candidates can check the list of important topics for the WBJEE exam syllabus. Many times, candidates search for important topics for the WBJEE 2025. To answer all such queries, we have here provided subject-wise important topics of WBJEE.
Candidates can check the WBJEE subject-wise syllabus for 2025 in the table below.
Subjects | Topics |
---|---|
WBJEE important topics 2025 physics |
|
WBJEE important topics 2025 chemistry |
|
|
The West Bengal Joint Entrance Examinations Board has released the WBJEE syllabus on the official website, wbjeeb.nic.in.
WBJEE syllabus 2025 includes the detailed syllabus of each subject asked in the exam i.e. Physics, Chemistry and Mathematics.
The WBJEE 2025 syllabus is divided into three subjects - Physics, Chemistry and Mathematics.
No, there might be tricky questions in the exam but no question will be asked out of WBJEE exam syllabus.
It depends upon the capability and speed of the candidate that how fast he/she is able to understand the topic.
Generally, WBJEE is considered moderately difficult, while JEE Main is perceived as more challenging. Most of the questions in WBJEE are of easy to moderate difficulty, with only a few being tough.
The syllabus of WBJEE is similar to the class 11 and 12 syllabus.
The topics in the syllabus of WBJEE and JEE are based on Physics, Chemistry, and Mathematics. There might be similarities in the topics of WBJEE and JEE Main. Students preparing for the JEE can easily crack the WBJEE exam.
The WBJEE exam is conducted for two papers - Paper 1 (Mathematics) and Paper 2 (Physics & Chemistry). Each paper is conducted for 2 hours. WBJEE paper 1 will comprise 75 questions while paper 2 will consist of 80 questions. Negative marking will be done for the wrong answers. WBJEE total marks are 200.
While NCERT books are the most important source of preparation for the WBJEE 2025 exam, candidates must also prepare from other books. A list of the important books for WBJEE 2025 exam are listed in the article.
Based on the previous year's WBJEE cutoff ranks for the Computer Science and Engineering (CSE) branch at Jalpaiguri Government Engineering College (JGEC), scoring 65 marks might make it challenging but not entirely impossible to secure a seat.
Looking at the 2024 cutoff data, the closing ranks for the General category (Home State) in the three rounds of counselling for CSE were quite low, ranging from 1747 to 2157 . These ranks typically correspond to significantly higher marks than 65 in the WBJEE.
However, the actual rank you secure with 65 marks in WBJEE 2025 will be crucial. The marks vs. rank correlation can vary each year depending on the overall performance of the candidates and the difficulty level of the exam. Generally, a score of 60-79 in WBJEE tends to correspond to a rank somewhere in the range of 15,750 to 16,250 based on some estimations.
Given this estimated rank range, admission to the CSE branch at JGEC, which typically closes within the top few thousand ranks for the general category, appears difficult.
Therefore, while getting a CSE seat at JGEC with 65 marks in the general category seems difficult based on past trends, your category and performance relative to others will be the deciding factors. You should aim to score as high as possible in WBJEE 2025 and then check the official cutoff ranks released by WBJEEB after the results. Keep an eye on the counselling process and participate in all relevant rounds.
Hii There,
According to the expected marks vs. rank study, if you receive 110 or 105 points, you will probably fall between 10,001 and 15,000 in the rank range based on the WBJEE 2024 statistics. The cutoff ranks for admission to Jadavpur University's Information Technology (IT) department are highly difficult. The IT closing rank for the open category in 2024 was around 295. This implies that in order to get admitted to the IT program, applicants had to place in the top 300.
I hope this answers your question.
Thanks
Hello Sudip,
A score of 105–110 in WBJEE is good, but to acquire IT at Jadavpur University depends on different factors like:
In the last few years, General category candidates generally needed a rank below 500–700 for IT at JU. You might get a rank between the 800–1200 mark (approx.) with a score of 105–110, which may render CSE or IT hard in the General category but achievable in reserved categories or under TFW quota. Thus, it is not a sure shot, but you have a fair chance depending on your category and cutoff patterns.
Based on the WBJEE 2024 data, scoring 110 or 105 marks would likely place you in the rank range of approximately 10,001 to 15,000, as per the expected marks vs. rank analysis . (https://zollege.in/exams/wbjee/marks-vs-rank?utm_source=chatgpt.com)
For admission to the Information Technology (IT) department at Jadavpur University, the cutoff ranks are quite competitive. In 2024, the closing rank for IT was around 295 for the open category . This suggests that candidates needed to secure a rank within the top 300 to gain admission into the IT program. (https://www.collegedekho.com/university/jadavpur-university-cutoff?utm_source=chatgpt.com)
Given this information, with a score of 110 or 105, it would be challenging to secure a seat in the IT department at Jadavpur University under the general category. However, cutoff ranks can vary each year based on factors like the number of applicants, exam difficulty, and seat availability.
If you belong to a reserved category, the cutoff ranks might be slightly relaxed, but the competition remains high. It's advisable to aim for a higher score to increase your chances of admission into the IT department.
Getting into Jadavpur University's Computer Science and Engineering (CSE) department with 110 marks in WBJEE is uncertain. Here's what you need to know¹:
- CSE Cutoff: The cutoff for CSE in Jadavpur University was 89 in 2024, based on WBJEE ranks. Since your score is 110, your rank might be higher than the cutoff rank.
- Rank Estimate: To get into Jadavpur University, you typically need a rank under 1500. For popular branches like CSE, Electronics, and Mechanical, aim for a rank under 600-700.
- Score Requirement: Scoring above 120 marks in WBJEE increases your chances of getting into good branches at Jadavpur University. For CSE, marks above 140 often correspond to ranks under 100.
Given the variability in cutoff scores and ranks, it's essential to:
- Check Previous Year Cutoffs: Review the cutoff ranks for CSE at Jadavpur University in previous years to gauge your chances.
- Use WBJEE Rank Predictor: Utilize online tools to estimate your rank based on your WBJEE score.
Keep in mind that admission to Jadavpur University depends on various factors, including:
- Category: Your category (General/SC/ST/OBC/PwD) affects cutoff ranks.
- Number of Seats: Availability of seats for specific courses impacts cutoff scores.
- Exam Difficulty: The difficulty level of the WBJEE exam influences cutoff ranks.
A flight attendant is a professional whose primary duty is to ensure the safety and comfort of passengers during an airline flight. An individual who is pursuing a career as a flight attendant is part of the cabin crew for the plane, a team of personnel who operate a commercial, business, or even military aircraft while travelling domestically or internationally.
An individual pursuing a career as a flight attendant is specially trained for the aircraft in which he or she works since passenger safety is their foremost concern. In this article, we will discuss how to become a flight attendant in India or how to become a flight attendant after graduation.
An aerospace engineer designs, develops, tests, and maintains aircraft, spacecraft, and related systems. They apply physics and engineering principles to improve aerospace technologies, often working in aviation, defence, or space sectors. Key tasks include designing components, conducting tests, and performing research. A bachelor’s degree is essential, with higher roles requiring advanced study. The role demands analytical skills, technical knowledge, precision, and effective communication.
A career in the aviation industry always sounds exciting. But, there is no scope for the slightest error as it may cost the lives of many people. A Flight Engineer role comes with the responsibility of monitoring the aircraft engine and control systems while in flight. Whenever the aircraft is away from the home station, he or she is required to perform pre-flight and post-flight inspections
An Aircrew Officer operates and navigates aircraft, ensuring safe flights and compliance with aviation regulations. Key duties include managing flight systems, conducting pre- and post-flight checks, and adhering to safety standards. The role typically requires working five days a week, with around 120 flight hours monthly. Employment may be contractual or permanent, depending on the airline.
An air hostess, or flight attendant, ensures passenger safety and comfort during flights. Responsibilities include safety demonstrations, serving meals, managing the cabin, handling emergencies, and post-flight reporting. The role demands strong communication skills, a calm demeanour, and a service-oriented attitude. It offers opportunities to travel and work in the dynamic aviation and hospitality industry.
An aeronautical engineer designs, develops, tests, and maintains aircraft and related systems. They work on components like engines and wings, ensuring performance, safety, and efficiency. The role involves simulations, flight testing, research, and technological innovation to improve fuel efficiency and reduce noise. Aeronautical engineers collaborate with teams in aerospace companies, government agencies, or research institutions, requiring strong skills in physics, mathematics, and engineering principles.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
An airline pilot operates aircraft to transport passengers and cargo safely. Responsibilities include pre-flight planning, in-flight operations, team collaboration, and post-flight duties. Pilots work in varying schedules and environments, often with overnight layovers. The demand for airline pilots is expected to grow, driven by retirements and industry expansion. The role requires specialized training and adaptability.
Welding Engineer Job Description: A Welding Engineer work involves managing welding projects and supervising welding teams. He or she is responsible for reviewing welding procedures, processes and documentation. A career as Welding Engineer involves conducting failure analyses and causes on welding issues.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
Individuals who opt for a career as an environmental engineer are construction professionals who utilise the skills and knowledge of biology, soil science, chemistry and the concept of engineering to design and develop projects that serve as solutions to various environmental problems.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
A Conservation Architect is a professional responsible for conserving and restoring buildings or monuments having a historic value. He or she applies techniques to document and stabilise the object’s state without any further damage. A Conservation Architect restores the monuments and heritage buildings to bring them back to their original state.
A Structural Engineer designs buildings, bridges, and other related structures. He or she analyzes the structures and makes sure the structures are strong enough to be used by the people. A career as a Structural Engineer requires working in the construction process. It comes under the civil engineering discipline. A Structure Engineer creates structural models with the help of computer-aided design software.
Highway Engineer Job Description: A Highway Engineer is a civil engineer who specialises in planning and building thousands of miles of roads that support connectivity and allow transportation across the country. He or she ensures that traffic management schemes are effectively planned concerning economic sustainability and successful implementation.
Are you searching for a Field Surveyor Job Description? A Field Surveyor is a professional responsible for conducting field surveys for various places or geographical conditions. He or she collects the required data and information as per the instructions given by senior officials.
Individuals who opt for a career as geothermal engineers are the professionals involved in the processing of geothermal energy. The responsibilities of geothermal engineers may vary depending on the workplace location. Those who work in fields design facilities to process and distribute geothermal energy. They oversee the functioning of machinery used in the field.
A geologist attempts to comprehend the historical backdrop of the planet we live on, all the more likely to anticipate the future and clarify current events. He or she analyses the components, deployments, results, physical characteristics, and past of the planet. A geologist examines the landforms and landscapes of the earth in relation to the geology, climatic, and human processes that have shaped them.
A geologist studies earth procedures, for example, seismic tremors, avalanches, floods, and volcanic eruptions to review land and draw up safe structure plans. When he or she researches earth materials, explores metals and minerals, yet in addition search for oil, petroleum gas, water, and strategies to extricate these.
Energy efficiency engineering is a broad field of engineering which deals with energy efficiency, energy services, facility management, plant engineering, and sustainable energy resources. Energy efficiency engineering is one of the most recent engineering disciplines to emerge. The field combines the knowledge and understanding of physics, chemistry, and mathematics, with economic and environmental engineering practices. The main job of individuals who opt for a career as an energy performance engineer is to find the most efficient and sustainable path to operate buildings and manufacturing processes.
Individuals who opt for a career as energy performance engineers apply their understanding and knowledge to increase efficiency and further develop renewable sources of energy. The energy efficiency engineers also examine the use of energy in those procedures and suggest the ways in which systems can be improved.
A career as a Petroleum engineer is concerned with activities related to producing petroleum. These products can be in the form of either crude oil or natural gas. Petroleum engineering also requires the exploration and refinement of petroleum resources. Therefore, a career as a petroleum engineer comes up with oil and gas onshore jobs. There are also desk jobs in the petroleum industry. In layman’s terms, a petroleum engineer is a person who finds the best way to drill and extract oil from oil wells. Individuals who opt for a career as petroleum engineer also tries to find new ways to extract oil in an efficient manner.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
A career as a civil engineer is of great importance for the infrastructural growth of the country. It is one of the most popular professions and there is great professional as well as personal growth in this civil engineering career path. There is job satisfaction in this civil engineering career path, but it also comes with a lot of stress, as there are multiple projects that need to be handled and have to be completed on time. Students should pursue physics, chemistry and mathematics in their 10+2 to become civil engineers.
A career as a Transportation Engineer is someone who takes care of people's safety. He or she is responsible for designing, planning and constructing a safe and secure transportation system. The transportation sector has seen a huge transformation and is growing day by day and improving every day.
As a Transport Engineer, he or she needs to solve complex problems such as accidents, costs, traffic flow, and statistics. A Transport Engineer also collaborates for projects with some other companies.
A loco pilot or locomotive pilot is a professional responsible for operating trains. He or she starts, stops, or controls the speed of the train. A locomotive pilot ensures that the train operates according to time schedules and signals. These loco pilots are responsible for carrying people and products to distinct destinations.
A loco pilot has thorough knowledge and understanding of the railway operations, rules, regulations, protocols, and measures to take in times of emergency. Their role is crucial in ensuring passenger and freight trains' smooth and safe operation. Here, in this article, we will discuss everything on how to how to become a loco pilot.
Among Top 30 National Universities for Engineering (NIRF 2024) | 30+ Specializations | AI Powered Learning & State-of-the-Art Facilities
NAAC A+ Grade | Among top 100 universities of India (NIRF 2024) | 40 crore+ scholarships distributed
AICTE Approved & AKTU Affiliated | Industry-Oriented Curriculum
Ranked #1 Among all Private Indian Universities in QS Asia Rankings 2025 | Scholarships worth 210 CR
Ranked 10th among Emerging Engineering Institutes in India by Times
NAAC A++ Grade | 2200 Recruiters | 45.98 Lakhs Highest Package