HP ITI Admission 2025: HP Tech Board is conducting the HP ITI 2025 spot admission from August 18 to 30, 2025. Candidates having Matriculation Marks above 70% should report to the institute on August 18, 2025, for the spot admission. The HP ITI 2025 spot admission is being conducted in offline mode at the institute level. Candidates can check the schedule for different matriculation marks from the table below. The dates for the ITI admission 2025 are available below. The HP ITI 2025 spot round 3 vacancy list is available online at eakadamik.in/hptsb_2025_iti.
This Story also Contains
The authority announced the HP ITI 2025 round 2 seat allotment on August 1, 2025. To check the seat allotment of HP ITI 2025, candidates have to provide their registration number and password. The round 2 registration for HP ITI counselling concluded on July 20, 2025. Candidates allotted seats have to report to the allotted institute for admission. The authority has released the HP ITI 2025 round 2 vacant list on the official website.
The first HP ITI 2025 seat allotment was announced on June 30, 2025. The authority has revised the last date for candidates allocated seats in the first round to July 8, 2025. If any seats remain vacant, admission will be offered through spot-round counselling. HP ITI spot counselling will be done based on a merit list.
The HP ITI admission 2025 registration process was concluded on June 16, 2025. Admission to the Govt. / Pvt. ITI institutes will be offered through the HP ITI counselling process. Students who have qualified for class 10 under the 10+2 system are eligible to apply for HP ITI admission 2025. The authority has released the HP ITI counselling dates online on the official website. Candidates who wish to get admission to the courses offered in the government / private ITI institutes have to participate in the HP ITI counselling process.
The authority has released the HP ITI admission dates online on the official website. The HP ITI admission schedules has been updated in the table mentioned below. Candidates are advised to refer to the table for HP ITI admission dates 2025.
Event | Dates |
Submission of online application and choice filling for FIRST ROUND | June 2, 2025 |
Last Date for Submission of online application and choice filling for FIRST ROUND | June 16, 2025 |
Verification of sports certificates at designated institutes as per Chapter 12 of Prospectus and Communication of Sports Credits to Counselling Committee at Directorate Level | June 18, 2025 |
Communication of Sports Credits to the Directorate by Counselling Committee at District Level Designated Institute | June 18, 2025 |
Round 1 | |
Allocation of seats (First Round) | June 30, 2025 |
Reporting by the Candidates with original certificates in respective ITI’s. |
|
Display of Vacant Seats after 1st round of Counselling |
|
Round 2 | |
New/ Other State Applicants can also apply for vacant Seats |
July 11 to 20, 2025 |
Last date of depositing fee online (through net banking etc.) and revision/ Filling of choices based on vacant/ available seats for SECOND ROUND | July 20, 2025 |
Allocation of seats (Second Round) | August 1, 2025 |
Reporting by the Candidates with original certificates in respective ITI’s. | August 2 to 8, 2025 |
Display of Vacant Seats after 2nd round of Counselling | August 12, 2025 |
Spot Round | |
Spot Admission at the institute level (Submission of the consent) Including fresh candidates. | August 18 to 30, 2025 |
Candidates having Matriculation Marks above 70% | August 18, 2025 |
Candidates having Matriculation Marks above 55% to 70% | August 19, 2025 |
Candidates with Matriculation Marks: Pass Percentage to 55% | August 20, 2025 |
Candidates with Matriculation Marks Pass Percentage to above | August 21 to 30, 2025 |
Uploading of admission data on MIS NCVT Portal | As per the schedule issued by the DGT, New Delhi |
The authority has released the HP ITI 2025 eligibility criteria online on the official website. The eligibility criteria of HP ITI 2025 is mentioned in the information brochure. HP ITI eligibility criteria comprise education qualifications and age criteria. Moreover, the eligibility criteria shall vary from course to course. Candidates who fulfill the HP ITI eligibility criteria shall be eligible to apply for HP ITI admission 2025. Below are the HP ITI eligibility criteria 2025.
Education Qualification:
The candidate has passed class 10 under the 10+2 system of education or its equivalent
Passed class 10 under the 10+2 system of education
Passed class 10 exam under the 10+2 system of education with science and mathematics or equivalent.
Age:
The age criteria for Driver Cum Mechanics (LMV) course is 18 year while for other courses candidates must be of 14 years at the time of admission.
There is no upper age limit.
Medical Fitness:
Candidates need to provide a medical fitness certificate at the time of admission.
The authority prepares the HP ITI 2025 merit list based on marks secured in class 10. HP ITI merit list 2025 download link will be available online on the official website. Candidates can check the merit list to know the names of the candidates who are eligible for the HP ITI spot counselling 2025
ITI admission 2025 HP is based on the counselling process. Candidates who fulfil the HP ITI eligibility criteria can apply for the HP ITI counselling 2025. The counselling for HP ITI admission 2025 comprises of registration, making the payment, choice filling and locking, seat allotment, and reporting to the allotted institutes. Below is the step-by-step process for HP ITI admission counselling.
Registration: Candidates need to complete the registration process. After the completion of HP ITI counselling registration 2025, the registration number and password will be generated. Candidates need to keep the registration number and password safe.
Make the payment: During the HP ITI registration process candidates have to pay a non-refundable registration fee. The payment will be accepted through net banking / credit card / debit card.
Filling the form: After the registration payment log in using the registration number and password. Candidates need to fill all the necessary fields with valid data. Moreover, candidates need to provide the registration fee details.
Uploading of Photographs: Candidates have to upload the photograph in the prescribed format. Moreover, the photo should be a recent photo without sunglasses.
Particulars | Formats | Size |
Photograph | JPEG | 10 kb - 200 kb |
Choice Filling: Candidates have to choose courses and institutes. After making the choices lock the choice. If the candidates don't make the choice then they shall not be considered for the counselling.
Note: Candidates should provide valid information while filling the HP ITI admission counselling application. If the information is found invalid then the candidature of such candidates will be cancelled.
The authority announced the HP ITI 2025 round 2 seat allotment result online on August 1, 2025. The allotment is based on choice made, merit list, no of seats available, etc. To check the seat allotment of HP ITI 2025 candidates have to provide the registration number and password. Candidates allotted seats have to report to the institute for document verification and admission. If the candidates are not satisfied with the seat allotment they can apply for the next round of counselling.
Candidates can check the reservation of seats for HP ITI admission 2025 below.
Category | Reserved Seats |
Unreserved | 45% |
SC | 22% |
ST | 5% |
OBC | 18% |
General (Financially Weak) | 10% |
Below is the list of trade offered at various HP ITI institutes.
Course Name | Course Duration | Trade category Engineering / Non Engineering |
Carpenter | 1 Year | Engineering |
Civil Engineering Assistant | 2 Year | Engineering |
Draughtsman (Civil) | 2 Year | Engineering |
Draughtsman (Mechanical) | 2 Year | Engineering |
Electrician | 2 Year | Engineering |
Electronics Mechanic | 2 Year | Engineering |
Fitter | 2 Year | Engineering |
Industrial Painter | 1 Year | Engineering |
Information & Communication Technology System Maintenance | 2 Year | Engineering |
Information Technology | 2 Year | Engineering |
Instrument Mechanic | 2 Year | Engineering |
Interior Decoration and Designing | 1 Year | Engineering |
Machinist | 2 Year | Engineering |
Mechanic (Motor Vehicle) | 2 Year | Engineering |
Refrigeration and Air Conditioning Technician(Nsqf) | 2 Year | Engineering |
Mechanic (Tractor) | 1 Year | Engineering |
Mechanic Auto Electrical and Electronics | 1 Year | Engineering |
Mechanic Diesel Engine | 1 Year | Engineering |
Painter General | 2 Year | Engineering |
Plastic Processing Operator | 1 Year | Engineering |
Plumber | 1 Year | Engineering |
Pump Operator-cum- Mechanic | 1 Year | Engineering |
Sheet Metal Worker | 1 Year | Engineering |
Solar Technician (Electrical) | 1Year | Engineering |
Surveyor | 2 Year | Engineering |
Technician Power Electronic System | 2 Year | Engineering |
Textile Wet Processing Technician | 2 Year | Engineering |
Tool & Die Maker (Dies & Moulds) | 2 Year | Engineering |
Turner | 2 Year | Engineering |
Welder | 1 Year | Engineering |
Welder (GMAW & GTAW) | 1 Year | Engineering |
Welder (Pipe) | 1 Year | Engineering |
Welder (Fabrication & Fitting) | 1 Year | Engineering |
Wireman | 2 Year | Engineering |
Basic Cosmetology | 1 Year | Non- Engineering |
Computer Aided Embroidery And Designing | 1 Year | Non- Engineering |
Computer Hardware & Network Maintenance | 1 Year | Non- Engineering |
Computer Operator and Programming Assistant | 1 Year | Non- Engineering |
Computer Operator and Programming Assistant (For Visually Impaired & Other Disabled) | 1 Year | Non- Engineering |
Dental Laboratory Equipment Technician | 2 Year | Non- Engineering |
Desk Top Publishing Operator | 1 Year | Non- Engineering |
Digital Photographer | 1 Year | Non- Engineering |
Dress Making | 1 Year | Non- Engineering |
Driver Cum Mechanic (LMV) | 6 Month | Non- Engineering |
Fashion Design& Technology | 1 Year | Non- Engineering |
Food & Beverages Guest Services Assistant | 1 Year | Non- Engineering |
Food Production (General) | 1 Year | Non- Engineering |
Front Office Assistant | 1 Year | Non- Engineering |
Fruit and Vegetable Processor | 1 Year | Non- Engineering |
Health Sanitary Inspector | 1 Year | Non- Engineering |
House Keeper | 1 Year | Non- Engineering |
Multimedia Animation and Special Effects | 1 Year | Non Engineering |
Physiotherapy Technician | 1 Year | Non- Engineering |
Radiology Technician | 2 Year | Non- Engineering |
Secretarial Practice (English) | 1 Year | Non- Engineering |
Sewing Technology | 1 Year | Non- Engineering |
Stenography & Secretarial Assistant (English) | 1 Year | Non- Engineering |
Stenography & Secretarial Assistant (Hindi) | 1 Year | Non- Engineering |
Surface Ornamentation Techniques (Embroidery) | 1 Year | Non- Engineering |
Travel & Tour Assistant | 1 Year | Non- Engineering |
Candidates can check the HP ITI institute fee structure below:
Jaypee Pvt. ITI Samirpur
Trade | Admission Fee Rs. | Tuition Fee per Month |
Mechanic Motor Vehicle | Rs. 4300/- per six month | Rs. 1075/- per month |
Fitter | Rs. 4300/- per | Rs. 1075/- per month |
Electrician | Rs. 4300/- per | Rs.1075/- per month |
Mechanic Ref & Air Conditioning | Rs. 4300/- per | Rs. 1075/- per month |
Sewing Technology | Rs. 1613/- per | Rrs. 538/- per Month |
Surface Ornamentation Technique (Embroidery) | Rs. 1613/- per | Rs. 538/- per Month |
Computer Operator and Programming Assistant | Rs. 1613/- per six month | Rs. 1075/- per Month |
Pvt ITI Fee Structure
Duration and Type of Trade | AdmissionFee (Per Six Month) | Tuition Fee (Per Month) |
4 Semester duration Engg. / Non Engg. Trades | Rs. 4300 /- | Rs. 1075/- |
2 Semester duration Engg Trades | Rs. 4300/- | Rs. 1075/- |
Two Semester Duration Non-Engg. Trades where computer equipment is prescribed in the syllabus.(Other than Sewing Technology, Surface ornamentation Techniques, Dress Making ) | Rs. 1613/- | Rs. 1075/- |
Sewing Technology, Surface ornamentation Techniques, Dress Making | Rs. 1613/- | Rs. 538/- |
Photographer, Digital Photographer | Rs. 1613/- | Rs. 806/- |
House Keeper | Rs. 1613/- | Rs. 806/- |
Food & Beverages Guest Services Assistant, Food Production (Gen), | Rs. 1613/- | Rs. 806/- |
Frequently Asked Questions (FAQs)
The HP ITI 2025 spot admission dates are from August 18 to 30, 2025.
The authority has extended the last date for candidates to report to the institutes to July 8, 2025.
The HP ITI 2025 admission began on June 2, 2025.