VIT - VITEEE 2025
ApplyNational level exam conducted by VIT University, Vellore | Ranked #11 by NIRF for Engg. | NAAC A++ Accredited | Last Date to Apply: 31st March | NO Further Extensions!
IIT Fee Structure 2025- IIT aspirants can check this article regarding the IIT fees for 4 years BTech. It includes IIT admission fees, tuition fees, exam fees and other amenities fees. As observed, the overall tuition fees for IITs vary between Rs 8 lakhs to 11 Lakhs. To gain admission to these colleges, candidates have to take IIT JEE Main and JEE Advanced exams. The number of seats for undergraduate programmes was 17740 in the Indian Institutes of Technology in 2024. Further information will be updated on the official website of JoSAA.
JEE Main 2025: Admit Card Link | Study Plan | Official Question Paper (Session 1)
JEE Main 2025: Sample Papers | Mock Tests | PYQs | High Scoring Topics | College Predictor
New: Meet Careers360 experts in your city and get guidance on shortlisting colleges
Apply to TOP B.Tech /BE Entrance exams: VITEEE | MET | AEEE | BITSAT
Candidates can check the previous year's JEE Main cut-offs for general category students from other states at NIT Surathkal below.
BTech Branch | JEE Mains cut-off for NIT Surathkal |
Artificial Intelligence | 2594 |
Computational and Data Science | 3348 |
Computer Science and Engineering | 1615 |
Electronics and Communication Engineering | 4227 |
Information Technology | 2994 |
The Indian Institutes of Technology are autonomous and are considered some of the prime institutes in India. The Government of India places a huge emphasis on these institutions of prime importance. There are 23 IITs in India funded and supported by the central government. The Institutes of Technology Act, of 1961 is the governing body of all the IITs in India and they have been declared as institutes of national importance. The IITs are autonomous and are some of the top-ranked institutions in India that offer admissions at undergraduate, postgraduate and PhD levels. Candidates can check the article for more details on each IIT college fee.
Candidates can check the approximate IIT Fees structure for BTech degrees at all the 23 IIT colleges in India. The following table consists of the total tuition fee for 4-year BTech programmes.
Institute Name | Total IIT Fees |
---|---|
IIT Madras | 8,58,000 |
IIT Delhi | 8,58,000 |
IIT Bombay | 8,69,000 |
IIT Kanpur | 11,67,000 |
IIT Kharagpur | 10,42,000 |
IIT Roorkee | 8,90,000 |
IIT Guwahati | 11,99,000 |
IIT Hyderabad | 9,08,000 |
IIT BHU | 8,58,000 |
ISM Dhanbad | 10,95,000 |
IIT Indore | 9,91,000 |
IIT Gandhinagar | 8,67,000 |
IIT Ropar | 9,36,000 |
IIT Jodhpur | 10,25,000 |
IIT Mandi | 8,63,000 |
IIT Patna | 9,85,000 |
IIT Bhubaneswar | 8,94,000 |
IIT Tirupati | 8,90,000 |
IIT Jammu | 8,19,000 |
IIT Palakkad | 8,93,000 |
IIT Bhilai | 8,92,000 |
IIT Dharwad | 9,06000 |
IIT Goa | 11,09,000 |
Here in this article, we have discussed the IIT fee structure of the top five Indian Institutes of Technology (IITs) in India.
Indian Institute of Technology, Kharagpur: The first institute which has been recognized as a national institute is the Indian Institute of Technology, Kharagpur. IIT Kharagpur was established in 1951. In the year 2019, it has been acknowledged as the Institute of Eminence. After the Indian Institute of Engineering Science and Technology Shibpur and Jadavpur University, IIT Kharagpur is the 3rd oldest technical institute in West Bengal. NIRF gives the fifth rank to IIT Kharagpur in the engineering category.
Course | Specialization | IIT fees per year (Rs. in Thousands) | Duration (Years) |
---|---|---|---|
IIT MTech fees structure | 74.40 | 2 | |
Computer Science and Engineering | 74.40 | 2 | |
Metallurgical and Materials Engineering | 74.40 | 2 | |
Mechanical Systems Design | 74.40 | 2 | |
Thermal Science and Engineering | 74.40 | 2 | |
Course | Specialization | IIT Fees (Rs. in Lakhs) | Duration (Years) |
Dual Degree | B.Tech and M.Tech Mechanical Engineering | 13.26 | 5 |
M.Sc Mathematics and Computing Integrated | 13.26 | 5 | |
B.Tech and M.Tech Computer Science and Engineering | 13.26 | 5 | |
M.Sc Economics Integrated | 13.26 | 5 | |
M.Sc Applied Geology Integrated | 13.26 | 5 | |
IIT Fee Structure for B.Tech. | 10.42 | 4 | |
B.Arch | 13.26 | 5 | |
Executive MBA | 6 | 3 | |
MBA | 9.30 | 2 | |
Post Graduate Diploma in Business Analytics | 20 | 2 |
Indian Institute of Technology, Bombay: The government of India established the Indian Institute of Technology, Bombay in 1958. With fourteen academic departments, ten centres, two schools and three interdisciplinary programmes, IIT Bombay started their journey. Now it has fifteen academic departments, twenty centres, a school of excellence and four interdisciplinary programmes. IIT Bombay, the second IIT in India provides several undergraduate, postgraduate and doctoral programmes in different disciplines. According to the NIRF 2024 ranking, it is ranked 3rd in the engineering category.
Course | Specialization | Fees (Rs. in Thousands) | Duration (Years) |
---|---|---|---|
IIT Fee Structure for M.Tech. | Aerodynamics | 50.40 | 2 |
Aerospace Propulsion | 50.40 | 2 | |
Aerospace Structures | 50.40 | 2 | |
Biomedical Engineering | 50.40 | 2 | |
Chemical Engineering | 50.40 | 2 | |
M.Sc. | Applied Geology | 49.60 | 2 |
Applied Geophysics | 49.60 | 2 | |
Applied Statistics and Informatics | 49.60 | 2 | |
Biotechnology | 49.60 | 2 | |
Chemistry | 49.60 | 2 | |
M.Des. | Communication Design | 59.60 | 2 |
Industrial Design | 59.60 | 2 | |
Interaction Design | 59.60 | 2 | |
Animation Design | 59.60 | 2 | |
Mobility and Vehicle Design | 59.60 | 2 | |
M.Phil. | Planning and Development | 50.40 | 2 |
Course | Specialization | Fees (Rs. in Lakhs) | Duration (Years) |
Dual Degree | B.Tech and M.Tech Electrical Engineering Dual Degree | 8.67 | 5 |
B.Tech and M.Tech Energy Science and Engineering Dual Degree | 8.67 | 5 | |
B.Tech and M.Tech Mechanical Engineering Dual Degree | 8.67 | 5 | |
B.Tech and M.Tech Metallurgical Process Engineering Dual Degree | 8.67 | 5 | |
B.Tech and M.Tech Aerospace Engineering Dual Degree | 8.67 | 5 | |
IIT Fee Structure for B.Tech | 8.69 | 4 | |
BS | Chemistry | 8.46 | 4 |
Economics | 8.46 | 4 | |
Mathematics | 8.46 | 4 | |
B.Des | 8.46 | 4 | |
Executive MBA | 36.30 | 1.5 | |
MBA | 8.30 | 2 |
Indian Institute of Technology, Kanpur: The Government of India established the Indian Institute of Technology, Kanpur in 1959. In the canteen of Harcourt Butler Technological Institute at Agricultural Gardens, Indian Institute of Technology, Kanpur started functioning. The institute moved to its present location in 1963. IIT Kanpur stands 4th in the engineering category of the NIRF 2024 ranking.
Course | Specialization | Fees (Rs. in Thousands) | Duration (Years) |
---|---|---|---|
IIT Fee Structure for M.Tech. | Aerospace Engineering | 36.65 | 2 |
Biological Sciences and Bioengineering | 36.65 | 2 | |
Chemical Engineering | 36.65 | 2 | |
Civil Engineering | 36.65 | 2 | |
Computer Science and Engineering | 36.65 | 2 | |
MS | Aerospace Engineering | 36.65 | 2 |
Chemical Engineering | 36.65 | 2 | |
Civil Engineering | 36.65 | 2 | |
Cognitive Science | 36.65 | 2 | |
Computer Science and Engineering | 36.65 | 2 | |
M.Sc. | Chemistry | 28.65 | 2 |
Mathematics | 28.65 | 2 | |
Physics | 28.65 | 2 | |
Statistics | 28.65 | 2 | |
M.Des | 36.65 | 2 | |
Course | Specialization | IIT Fees (Rs. in Lakhs) | Duration (Years) |
IIT Fee Structure for B.Tech. | 11.67 | 2 | |
BS | Mathematics and Scientific Computing | 8.31 | 4 |
Chemistry | 8.31 | 4 | |
Economics | 8.31 | 4 | |
Physics | 8.31 | 4 | |
Earth Sciences | 8.31 | 4 | |
MBA | 2.97 | 2 | |
M.Des | 36.65 | 2 |
Indian Institute of Technology, Madras: The third institute which has been recognized as a national institute is the Indian Institute of Technology, Madras. IIT Madras was established in 1959. At the time of its establishment, the Indian Institute of Technology, Madras got assistance from the former government of West Germany, both financially and technically. In a stretch of four years, starting from 2016 to 2019, the IIT Madras has been ranked as the top engineering institute in India. IIT Madras remains first in the NIRF 2024 Ranking for the 6th year in a row.
Course | Specialization | IIT Fees (Rs. in Thousands) | Duration (Years) |
---|---|---|---|
IIT Fee Structure for M.Tech. | Computer Science and Engineering | 28.95 | 2 |
Thermal Engineering | 28.95 | 2 | |
Chemical Engineering | 28.95 | 2 | |
Design Engineering | 28.95 | 2 | |
Ocean Engineering | 28.95 | 2 | |
MS | Metallurgical and Material Engineering | 26.85 | 3 |
Aerospace Engineering | 26.85 | 3 | |
Applied Mechanics | 26.85 | 3 | |
Biotechnology | 26.85 | 3 | |
Chemical Engineering | 26.85 | 3 | |
M.Sc. | Chemistry | 20.32 | 2 |
Mathematics | 20.32 | 2 | |
Physics | 20.32 | 2 | |
Course | Specialization | Fees (Rs. in Lakhs) | Duration (Years) |
Dual Degree | B.Tech and M.Tech Engineering Design | 11.80 | 5 |
B.Tech and M.Tech Electrical Engineering | 8.26 | 5 | |
B.Tech and M.Tech Biological Engineering | 8.26 | 5 | |
IIT Fee Structure for B.Tech. | 8.58 | 4 | |
MBA | 6.35 | 2 | |
MBA | 8 | 2 | |
Executive MBA | 13 | 2 |
Indian Institute of Technology, Delhi: The Government of India established the Indian Institute of Technology, Delhi in 1961 but got the status of an Institute of National Importance in 1963. In the year 2018, it has been acknowledged as the Institute of Eminence. The NIRF 2024 ranking of IIT Delhi in the engineering category is 2nd.
Course | Specialization | Fees (Rs. in Thousands) | Duration (Years) |
---|---|---|---|
M.Sc. | Chemistry | 85.80 | 2 |
Mathematics | 85.80 | 2 | |
Physics | 85.80 | 2 | |
Course | Specialization | Fees (Rs. in Lakhs) | Duration (Years) |
IIT Fee Structure for M.Tech. | Applied Optics | 2.60 | 2 |
Atmospheric Oceanic Science and Technology | 2.60 | 2 | |
Biomedical Engineering | 2.60 | 2 | |
Chemical Engineering | 2.60 | 2 | |
Communications Engineering | 2.60 | 2 | |
IIT BTech fees structure | 8.58 | 4 | |
MS | Applied Mechanics | 2.60 | 2 |
Biological Sciences | 2.60 | 2 | |
Chemical Engineering | 2.60 | 2 | |
Civil Engineering | 2.60 | 2 | |
Electrical Engineering | 2.60 | 2 | |
Dual Degree | B.Tech and M.Tech Chemical Engineering | 12.45 | 5 |
B.Tech and M.Tech Computer Science and Engineering | 12.45 | 5 | |
B.Tech and M.Tech Mathematics and Computing | 12.45 | 5 | |
B.Tech and M.Tech Biochemical Engineering and Biotechnology | 12.45 | 5 | |
MBA | 9.60 | 2 | |
Technology Management Part-Time | 11.70 | 2 | |
Telecommunication Systems Management | 8.80 | 3 | |
Executive MBA Technology Management | 10.80 | 3 | |
M.Des Industrial Design | 3.30 | 2 |
S. No. | Name | Short Name | State |
---|---|---|---|
1 | Indian Institute of Technology, Madras | IITM | Tamil Nadu |
2 | Indian Institute of Technology, Delhi | IITD | Delhi |
3 | Indian Institute of Technology, Bombay | IITB | Maharastra |
4 | Indian Institute of Technology, Kanpur | IITK | Uttar Pradesh |
5 | IITR | Uttarakhand | |
6 | Indian Institute of Technology, Kharagpur | IITKGP | West Bengal |
7 | IITG | Assam | |
8 | IITH | Telangana | |
9 | IITI | Madhya Pradesh | |
10 | IIT (BHU) | Uttar Pradesh | |
11 | IIT (ISM) | Jharkhand | |
12 | IITGN | Gujarat | |
13 | IITRPR | Punjab | |
14 | IITJ | Rajasthan | |
15 | IITMandi | Himachal Pradesh | |
16 | IITP | Bihar | |
17 | IITBBS | Odisha | |
18 | IITTP | Andhra Pradesh | |
19 | IITJM | Jammu & Kashmir | |
20 | IITPKD | Kerala | |
21 | IITBH | Chattishgarh | |
22 | IITDH | Karnataka | |
23 | IITGOA | Goa |
IIT are an autonomous public technical and research university located in India. They are governed by the Institutes of Technology Act, 1961 which has declared them as institutions of national importance and lays down their powers, duties, and framework for governance.
This a vague question because it depends on the candidate and their merit as well. In 2014, 13.6 lakhs students sat for the IIT-JEE exams and only 9,784 seats were available in all the IITs put together. That's an acceptance rate of only 0.7 per cent. Even though the IIT-JEE exam is extremely tough, the number of aspirants keeps on increasing every year.
Not every IITian leaves the campus with a job offer. A country where a bunch of engineers are graduating every year it's hard for even the top institutions to guarantee 100 per cent placements.
Application Date:03 September,2024 - 01 April,2025
Application Date:14 November,2024 - 25 April,2025
You cannot directly take JEE advance after 12 th grade first, you need to appear for JEE Mains.
For JEE Mains,
There is no percentage required to appear in the JEE Mains. However, to gain admission in top institutes like NIIT and IIT, you need to score at least 65% in your 12 th grade for the SC/ST category.
For the most updated and accurate information, you should check the official NTA website (jeemain.nta.nic.in)
Hello,
Allens jayanagar branch in Bangalore is considered one of the best for JEE preparation due to its experience faculty, structured curriculum, and regular test series. the branch has a strong track record of producing top JEE rankers. additionally, it offers a good learning environment with ample resources for students.
Hey Anushka, So, you're wondering how to snag a spot in Amity Noida's B.Tech program? Good question! It's not just about JEE Main, thankfully. They actually have a few different ways to get in, which is great because it gives more people a chance. First off, here's the basic eligibility:
You've gotta have passed Class XII with Physics, Chemistry, and Maths as your main subjects.
Now, for the Non-Sponsored category (which is usually merit-based), you'll need at least 60% overall in both Class X and Class XII.
If you're applying under the Sponsored category, they're a bit more lenient – you'll need a minimum of 55%. Just keep in mind that the fees are usually higher for this category. Okay, so about those entrance exams... Here's the breakdown:
Amity JEE: Amity has its own entrance exam, the Amity JEE. You can register for it on their website.
JEE Main Scores: If you've already taken JEE Main and did well, you might be able to get direct admission. It really depends on your score and the specific program you're after.
CUET: Yep, they take CUET scores too for certain B.Tech programs. You'll have to double-check if your chosen specialisation accepts it. What happens after you apply?
Personal Interview: Don't be surprised if you're called for an interview! They want to see if you're actually interested in engineering and a good fit for the program.
Online Application: Head over to Amity's website and fill out the online application form. Be sure to have all your details handy.
Document Submission: Gather your transcripts, exam scores, ID proofs and any other requested documents. After that, they'll let you know if you've been shortlisted and what the next steps are. This could mean taking the Amity JEE or scheduling that interview we talked about. A few other things to keep in mind:
Like I said before, Amity has those two categories: Non-Sponsored and Sponsored. Really think about which one makes the most sense for you based on your grades and how much you're willing to pay.
And finally, some B.Tech programs might have extra requirements or higher cut-off marks. So, definitely read the fine print for the specific program you're interested in!
With a 93.6680718 percentile in JEE Mains 2025 January session and belonging to the OBC category , your eligibility for Mathematics and Computing Engineering at Delhi Technological University (DTU) depends on factors like your All India Rank (AIR) , category-specific cutoff ranks , and whether you are applying under the Delhi Region or Outside Delhi Region quota.
A 93.6680718 percentile means you have scored better than approximately 93.67% of the candidates. Your AIR depends on the total number of test-takers. If around 10 lakh students appeared, your rank would be approximately 63,320 .
Delhi Region: Previous years' closing ranks were 70,301 – 85,687 .
Outside Delhi Region: Cutoffs were significantly higher, around 16,028 – 19,103 .
If you are from Delhi , your rank is close to previous cutoffs, meaning you have a moderate chance .
If you are from Outside Delhi , your rank is higher than the required cutoff , making admission unlikely . https://www.collegepravesh.com/engineering-colleges/dtu-delhi/
Your admission chances depend on cutoff trends and the region quota . If applying under the Delhi Region , you might secure admission. However, for Outside Delhi candidates , the cutoff ranks have been significantly lower, making it difficult. Cutoffs vary yearly, so checking the latest updates from DTU is advisable.
Agar aap kisi cheez ko lekar pareshaan ya uljhan mein hain, toh bas ek baar araam se sochiye—kaam chhota ho ya bada, har problem ka solution hota hai.
Firstly, Be relaxed and give April attempt of Jee mains.
JEE is not the only option left in non-medical field,, You can explore other courses as well. You can also try state universities and their affiliated colleges.
You can do BSC-IT and then try to clear government exams.
Feel free to ask regarding this.
Thank-You
All the best
A flight attendant is a professional whose primary duty is to ensure the safety and comfort of passengers during an airline flight. An individual who is pursuing a career as a flight attendant is part of the cabin crew for the plane, a team of personnel who operate a commercial, business, or even military aircraft while travelling domestically or internationally.
An individual pursuing a career as a flight attendant is specially trained for the aircraft in which he or she works since passenger safety is their foremost concern. In this article, we will discuss how to become a flight attendant in India or how to become a flight attendant after graduation.
An aerospace engineer is an individual who develops new ideas and technologies that can be used in defence systems, aviation, and spacecraft. He or she not only designs aircraft, spacecraft, satellites, and missiles but also creates test vehicles to ensure optimum functionality. Aerospace engineering is a branch of engineering that deals with the study, design, and development of aerial vehicles such as aircraft and spacecraft.
Aerospace engineering jobs deal with employees who design or build missiles and aircraft for national defence, or spacecraft. Aerospace engineering or aircraft engineering is often referred to as rocket science. The bottom line is that the person who is pursuing a career in aerospace engineering has to deal with multiple teams at different levels and work across various technologies.
A career in the aviation industry always sounds exciting. But, there is no scope for the slightest error as it may cost the lives of many people. A Flight Engineer role comes with the responsibility of monitoring the aircraft engine and control systems while in flight. Whenever the aircraft is away from the home station, he or she is required to perform pre-flight and post-flight inspections
An aircrew officer or airline commanders fly aircraft to provide transportation to passengers or cargo. The aircrew officer operates the engines of aircraft and controls to navigate and fly the airplane. The ability to learn new technologies every time and to stay up-to-date with the changes in the industry is what the aircrew officer should possess.
This could be possible through membership with professional pilot associations. The aircrew officer is also one of the highest-paid professionals and the job is quite coveted. Keep reading to find out what you need to know about how to become aircrew officer.
You may also read career as Airline Pilot.
An air hostess is a flight attendant also known as a cabin crew or steward. An air hostess undertakes several pre-flight, in-flight, and post-flight duties and is responsible for ensuring the safety and comfort of passengers on both national and international flights. A career as an air hostess might be desirable for you if you are excited about a job in which you can help people and travel to exciting places.
Air hostesses play a crucial role in the flight crew, working closely with pilots and ground personnel to provide a safe and comfortable travel experience, even beyond their hospitality responsibilities. Being flexible, having strong communication skills, and being dedicated to the comfort of passengers are all necessary for their dynamic function, which makes them essential to the entire travel experience.
An Aeronautical Engineer job comes with the responsibility of designing aircraft and thrust systems. He or she is employed in aviation, defence or civil aviation industries. Aeronautical Engineer is generally engaged in the design of aircraft and propulsion systems as well as the analysis of building materials and aircraft's aerodynamic performance. The role of an Aeronautical Engineer may involve assembling parts of aircraft, testing and maintaining them.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
Are you searching for an 'airline pilot job description'? An airline pilot or airline commander flies aircraft and helicopters to provide transportation to passengers or cargo. The airline pilot operates the engines of the aircraft and controls them to navigate and fly the airplane. The ability to learn new technologies every time and to stay up-to-date with the changes in the industry is what aviators should possess. The career as airline pilot is also one of the highest-paid professionals and the job is quite coveted.
Welding Engineer Job Description: A Welding Engineer work involves managing welding projects and supervising welding teams. He or she is responsible for reviewing welding procedures, processes and documentation. A career as Welding Engineer involves conducting failure analyses and causes on welding issues.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
Individuals who opt for a career as an environmental engineer are construction professionals who utilise the skills and knowledge of biology, soil science, chemistry and the concept of engineering to design and develop projects that serve as solutions to various environmental problems.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
A Conservation Architect is a professional responsible for conserving and restoring buildings or monuments having a historic value. He or she applies techniques to document and stabilise the object’s state without any further damage. A Conservation Architect restores the monuments and heritage buildings to bring them back to their original state.
A Structural Engineer designs buildings, bridges, and other related structures. He or she analyzes the structures and makes sure the structures are strong enough to be used by the people. A career as a Structural Engineer requires working in the construction process. It comes under the civil engineering discipline. A Structure Engineer creates structural models with the help of computer-aided design software.
Highway Engineer Job Description: A Highway Engineer is a civil engineer who specialises in planning and building thousands of miles of roads that support connectivity and allow transportation across the country. He or she ensures that traffic management schemes are effectively planned concerning economic sustainability and successful implementation.
Are you searching for a Field Surveyor Job Description? A Field Surveyor is a professional responsible for conducting field surveys for various places or geographical conditions. He or she collects the required data and information as per the instructions given by senior officials.
Individuals who opt for a career as geothermal engineers are the professionals involved in the processing of geothermal energy. The responsibilities of geothermal engineers may vary depending on the workplace location. Those who work in fields design facilities to process and distribute geothermal energy. They oversee the functioning of machinery used in the field.
A geologist attempts to comprehend the historical backdrop of the planet we live on, all the more likely to anticipate the future and clarify current events. He or she analyses the components, deployments, results, physical characteristics, and past of the planet. A geologist examines the landforms and landscapes of the earth in relation to the geology, climatic, and human processes that have shaped them.
A geologist studies earth procedures, for example, seismic tremors, avalanches, floods, and volcanic eruptions to review land and draw up safe structure plans. When he or she researches earth materials, explores metals and minerals, yet in addition search for oil, petroleum gas, water, and strategies to extricate these.
Energy efficiency engineering is a broad field of engineering which deals with energy efficiency, energy services, facility management, plant engineering, and sustainable energy resources. Energy efficiency engineering is one of the most recent engineering disciplines to emerge. The field combines the knowledge and understanding of physics, chemistry, and mathematics, with economic and environmental engineering practices. The main job of individuals who opt for a career as an energy performance engineer is to find the most efficient and sustainable path to operate buildings and manufacturing processes.
Individuals who opt for a career as energy performance engineers apply their understanding and knowledge to increase efficiency and further develop renewable sources of energy. The energy efficiency engineers also examine the use of energy in those procedures and suggest the ways in which systems can be improved.
A career as a Petroleum engineer is concerned with activities related to producing petroleum. These products can be in the form of either crude oil or natural gas. Petroleum engineering also requires the exploration and refinement of petroleum resources. Therefore, a career as a petroleum engineer comes up with oil and gas onshore jobs. There are also desk jobs in the petroleum industry. In layman’s terms, a petroleum engineer is a person who finds the best way to drill and extract oil from oil wells. Individuals who opt for a career as petroleum engineer also tries to find new ways to extract oil in an efficient manner.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
A career as a civil engineer is of great importance for the infrastructural growth of the country. It is one of the most popular professions and there is great professional as well as personal growth in this civil engineering career path. There is job satisfaction in this civil engineering career path, but it also comes with a lot of stress, as there are multiple projects that need to be handled and have to be completed on time. Students should pursue physics, chemistry and mathematics in their 10+2 to become civil engineers.
A career as a Transportation Engineer is someone who takes care of people's safety. He or she is responsible for designing, planning and constructing a safe and secure transportation system. The transportation sector has seen a huge transformation and is growing day by day and improving every day.
As a Transport Engineer, he or she needs to solve complex problems such as accidents, costs, traffic flow, and statistics. A Transport Engineer also collaborates for projects with some other companies.
A loco pilot or locomotive pilot is a professional responsible for operating trains. He or she starts, stops, or controls the speed of the train. A locomotive pilot ensures that the train operates according to time schedules and signals. These loco pilots are responsible for carrying people and products to distinct destinations.
A loco pilot has thorough knowledge and understanding of the railway operations, rules, regulations, protocols, and measures to take in times of emergency. Their role is crucial in ensuring passenger and freight trains' smooth and safe operation. Here, in this article, we will discuss everything on how to how to become a loco pilot.
National level exam conducted by VIT University, Vellore | Ranked #11 by NIRF for Engg. | NAAC A++ Accredited | Last Date to Apply: 31st March | NO Further Extensions!
Ranked #42 among Engineering colleges in India by NIRF | Highest CTC 50 LPA , 100% Placements
Among Top 30 National Universities for Engineering (NIRF 2024) | 30+ Specializations | AI Powered Learning & State-of-the-Art Facilities
100% Placement Record | Highest CTC 54 LPA | NAAC A++ Accredited | Ranked #65 in India by NIRF Ranking 2024 | JEE & JET Scores Accepted
Apply for B.E at East Point College of Engineering and Technology | Use Code : Careers360 & Avail 50% Off on Application Forms | Last Date: 19th Apr’25
Ranked #1 Among all Private Indian Universities in QS Asia Rankings 2025 | Scholarships worth 210 CR