What are the GATE 2025 Cutoff Scores for PSU Recruitment? - PSUs will announce the GATE cutoff score 2025 for recruitment on their official website. GATE 2025 cutoff scores for PSU will be based on the ranks submitted while filling out the recruitment forms. Due to an increase in the number of PSU accepting GATE scores for the recruitment process, the cutoff score will vary as per the corporation, discipline, and category. Moreover, there are other selection criteria that will be taken into consideration while determining the cutoff. Hence, candidates are often swamped with thoughts on what are the GATE cutoff for PSU recruitment 2025. The scores of the GATE exam can also used for M.Tech admission.
Careers360 presents “What is the PSU Recruitment GATE cutoff 2025 scores” to give candidates a clear picture of the previous year's cutoff trends. By checking the what are the minimum GATE scores 2025 for PSU, the candidates can know the probable rank they have to secure for a chance to get selected. The GATE 2025 cutoff for PSU recruitment will be prepared after checking various factors such as the number of vacant posts, previous trends, exam difficulty level, and more. Read the full article to know more about What are the PSU Recruitment GATE Cutoff Scores 2025?
Also Read
| GATE Application Form | GATE Question Papers | GATE Syllabus |
| GATE Admit Card | GATE Mock Test | GATE Exam Pattern |
| GATE Answer Key | GATE Eligibility | GATE Dates |
Candidates will be shortlisted for NTPC recruitment based on GATE 2025 scores. An online screening test will be held after which an interview will be conducted. Electrical, Mechanical, Mining, Electronics & Instrumentation Engineering discipline candidates will be able to apply.
Since this year PSU cutoff through GATE has not been released, the candidates can check the table given below to know probably what are the cutoff scores of GATE for PSU recruitment 2025. Moreover, candidates can check the GATE cutoff for PSU mechanical, chemical, civil, electrical, electronics, mining, etc. The GATE PSU cutoff given is a previous year and can be used for reference purposes.
Discipline | UR | EWS | OBC | SC | ST | PwBD (OH) | PwBD (HH) | PwBD (MD) |
Electrical | 392 | 675 | 675 | 1696 | 1908 | 9261 | NA | NA |
Mechanical | 421 | 926 | 862 | 2501 | 3834 | 13959 | 17079 | 11564 |
Electronics | 276 | 428 | 322 | 874 | 2450 | 9172 | 13449 | NA |
Instrumentation | 1301 | 1514 | 1761 | 1761 | 3235 | NA | NA | NA |
Instrumentation | 81 | 269 | 214 | 669 | 530 | 2307 | 6784 | NA |
Mining | 106 | 280 | 212 | 427 | 641 | NA | NA | NA |
Check the GATE cutoff for PSU Electrical Engineering, Mechanical Engineering, and Mining category-wise here.
| GATE Paper | Category Name | cutoff |
| Electrical Engineering | General | 68 |
| EWS | 59 | |
| OBC | 59.33 | |
| SC | 50.33 | |
| ST | 47.33 | |
| Mechanical Engineering | General | 77.94 |
| EWS | 70.6 | |
| OBC | 70.08 | |
| SC | 58.95 | |
| ST | 52.73 | |
| Electronics and Communication Engineering | General | 59.33 |
| EWS | 56.67 | |
| OBC | 53.67 | |
| SC | 41 | |
| ST | 37.67 | |
| Instrumentation Engineering | General | 60 |
| EWS | 33 | |
| OBC | 44.67 | |
| SC | 41.67 | |
| ST | 25 | |
| Mining Engineering | General | 43.33 |
| OBC | 37 | |
| SC | 37 | |
| ST | 29.67 |
Discipline | Cutoff | Category | ||||
UR | OBC (NCL) | SC | ST | PwBD | ||
Electrical | GATE AIR | 677 | 1408 | 3674 | 4213 | 19898 |
Cut off marks | 81 | 76 | 66.33 | 64.67 | 37 | |
Mechanical | GATE AIR | 1108 | 2802 | 7716 | 10958 | 38644 |
Cut off marks | 72.66 | 65.87 | 54.31 | 49.19 | 25.77 | |
Electronics | GATE AIR | 316 | 1047 | 2359 | 5319 | 11242 |
Cut off marks | 64 | 55.33 | 48 | 39.33 | 30 | |
Instrumentation | GATE AIR | 328 | 969 | 1475 | 2869 | 2869 |
Cut off marks | 52 | 39 | 32.33 | 22 | 22 | |
Mining | GATE AIR | 237 | 523 | 404 | 663 | NA |
Cut off marks | 39.33 | 29 | 32.33 | 25.67 | NA | |
Discipline | UR | OBC | SC | ST | PWD |
Electrical | 64.8695 | 59.5195 | 49.6695 | 45.1695 | 28.8695 |
Mechanical | 73.438 | 71.399 | 60.459 | 54.212 | 42.113 |
Electronics | 52.0805 | 48.55 | 37.2805 | 37.45 | 31.2805 |
Instrumentation | 68.1805 | 65.5695 | 52.6805 | 52.6195 | 43.0695 |
Mining | 68.48 | 55.37 | 45.67 | 40.95 | NA |
*The Cut-off Marks are the total marks scored in GATE (out of 85), GD (out of 05), and Interview (out of 10)
* The total marks have been calculated only for those candidates who have qualified separately in both GD & Interview.
| Discipline | Cutoff | Category wise GATE-2017 cut-off marks and rank | ||||
General | OBC | SC | ST | PWD | ||
| Electrical | Cut Off Marks | 62.84 | 59.60 | 44.35 | 48.98 | 31.59 |
All India Rank | 206 | 380 | 3221 | 1857 | 10273 | |
| Mechanical | Cut Off Marks | 81.02 | 77.26 | 69.76 | 62.94 | 41.89 |
All India Rank | 280 | 638 | 2010 | 4300 | 17332 | |
| Electronics | Cut Off Marks | 65.95 | 64.52 | 56.08 | 51.28 | 45.23 |
All India Rank | 112 | 139 | 632 | 1279 | 2570 | |
| Instrumentation | Cut Off Marks | 72.35 | 71.01 | 60.01 | 47.02 | 34.01 |
All India Rank | 88 | 102 | 371 | 929 | 1937 | |
| Civil | Cut Off Marks | 82.43 | 75.85 | 64.04 | 66.84 | 40.11 |
All India Rank | 42 | 179 | 973 | 693 | 7855 | |
Discipline | Scores/AIR | General OBC | SC | ST | |
Electrical | Cut Off Marks | 66.69 | 61.11 | 50.93 | 49.28 |
AIR | 223 | 559 | 1955 | 2305 | |
Mechanical | Cut Off Marks | 76.31 | 68.69 | 55.83 | 49.72 |
AIR | 439 | 1309 | 5035 | 8062 | |
Electronics | Cut Off Marks | 63.74 | 55.85 | 47.47 | 47.1 |
AIR | 138 | 497 | 1675 | 1732 | |
Instrumentation | Cut Off Marks | 63.33 | 55 | 43 | 46.67 |
AIR | 97 | 299 | 934 | 696 | |
Civil | Cut Off Marks | 73.12 | 70.34 | 64.84 | 57.56 |
AIR | 74 | 124 | 309 | 811 | |
IT | Cut Off Marks | 65.93 | 55.76 | 50.71 | 37.71 |
AIR | 181 | 755 | 1236 | 4193 | |
Candidates with a valid GATE score 2025 will be able to apply for NPCIL recruitment. GATE cutoff will let the candidate know the minimum marks in GATE for PSU Civil, Mechanical, Chemical, and other disciplines. Check the previous years’ GATE cutoff for NPCIL from the table given below.
The previous years GATE cutoff for NPCIL have been mentioned below. Candidates can analyse the NPCIL cutoff trends from the below tables.
GATE Paper | Category | Cutoff |
Chemical Engineering | General | 608 |
EWS | 462 | |
SC | 423 | |
ST | 306 | |
OBC | 494 | |
Civil Engineering | General | 766 |
EWS | 570 | |
SC | 602 | |
ST | 623 | |
OBC | 676 | |
Electrical Engineering | General | 651 |
EWS | 325 | |
SC | 478 | |
ST | 450 | |
OBC | 582 | |
Electronics and Communication Engineering | General | 700 |
EWS | 537 | |
SC | 501 | |
ST | 490 | |
OBC | 596 | |
Instrumentation Engineering | General | 354 |
EWS | 324 | |
SC | 186 | |
ST | 187 | |
OBC | 310 | |
Mechanical Engineering | General | 668 |
EWS | 453 | |
SC | 459 | |
ST | 376 | |
OBC | 570 |
GATE Paper | Category | Cutoff |
Chemical Engineering | General | 656 |
EWS | 361 | |
SC | 479 | |
ST | 324 | |
OBC | 463 | |
Civil Engineering | General | 824 |
EWS | 754 | |
SC | 655 | |
ST | 640 | |
OBC | 747 | |
Electrical Engineering | General | 803 |
EWS | 750 | |
SC | 604 | |
ST | 596 | |
OBC | 732 | |
Electronics and Communication Engineering | General | 779 |
EWS | 671 | |
SC | 604 | |
ST | 498 | |
OBC | 696 | |
Instrumentation Engineering | General | 581 |
EWS | 362 | |
SC | 332 | |
ST | 242 | |
OBC | 499 | |
Mechanical Engineering | General | 773 |
EWS | 582 | |
SC | 590 | |
ST | 496 | |
OBC | 700 |
GATE Paper | Job Name | Category | Cutoff |
Chemical Engineering | Executive Trainee(Chemical) | General | 708 |
EWS | 601 | ||
SC | 557 | ||
ST | 498 | ||
OBC | 649 | ||
Civil Engineering | Executive Trainee(Civil) | General | 820 |
EWS | 757 | ||
SC | 648 | ||
ST | 614 | ||
OBC | 735 | ||
Electrical Engineering | Graduate Executive Trainee(Electrical) | General | 779 |
EWS | 715 | ||
SC | 600 | ||
ST | 591 | ||
OBC | 707 | ||
Electronics and Communication Engineering | Executive Trainee(Electronics) | General | 847 |
EWS | 714 | ||
SC | 653 | ||
ST | 607 | ||
OBC | 768 | ||
Instrumentation Engineering | Executive Trainee(Instrumentation) | General | 719 |
SC | 477 | ||
ST | 334 | ||
OBC | 660 | ||
Mechanical Engineering | Executive Trainee(Mechanical) | General | 801 |
EWS | 745 | ||
SC | 611 | ||
ST | 571 | ||
OBC | 732 |
Discipline | UR | EWS | OBC | SC | ST | PwBD |
Mechanical | 77 | 74 | 72 | 68 | 68 | 64 |
Chemical | 74 | 64 | 66 | 64 | 64 | 76 |
Electrical | 75 | 70 | 70 | 69 | 68 | 63 |
Electronics | 74 | 74 | 64 | 64 | 69 | NA |
Instrumentation | 70 | -- | 68 | 64 | -- | NA |
Civil | 75 | 72 | 69 | 67 | 67 | NA |
Discipline | UR | EWS | SC | ST | OBC | PwBD |
Mechanical | 827 | 749 | 611 | 540 | 744 | 540 |
Chemical | 765 | 680 | 559 | 510 | 667 | 510 |
Electrical | 841 | 700 | 637 | 594 | 760 | 594 |
Electronics | 864 | 772 | 641 | 607 | 766 | 607 |
Instrumentation | 793 | NA | 539 | NA | 689 | 539 |
Civil | 837 | 696 | 652 | 641 | 726 | 641 |
Discipline | Gen | SC | ST | OBC | PwD |
Mechanical (ME) | 845 | 683 | 543 | 786 | 543 |
Chemical (CH) | 767 | 603 | 436 | 680 | 436 |
Electrical (EE) | 825 | 615 | 525 | 744 | 525 |
Electronics & Communication (EC) | 873 | 705 | 562 | 785 | 562 |
Instrumentation (IN) | 770 | 604 | 387 | 704 | 387 |
Civil (CE) | 837 | 643 | 564 | 772 | 564 |
ONGC recruitment 2025 through GATE will see selected Graduate Trainees at E-1 level in Engineering & Geo-Sciences. After being shortlisted based on their GATE scores 2025, a personal interview will be conducted.
As the GATE 2025 Cutoff for ONGC are not yet available, candidates can find the previous year data from the tables below.
ONGC Cutoff marks based on (GATE 2022/2023/2024)
| Discipline | UR | EWS | OBC (NCL) | SC | ST |
| Mechanical | 620 | 339 | 547 | 408 | 347 |
| Chemical | 545 | 316 | 324 | 262 | 219 |
| Electrical | 635 | 481 | 551 | 455 | 442 |
| Electronics | 6G2 | 534 | 563 | 497 | 410 |
| Instrumentation | 354 | 316 | 312 | 220 | 187 |
| Civil | 751 | 628 | 678 | 590 | 593 |
ONGC Cutoff marks based on (GATE 2022/2023/2024) for PwBD candidates
| PwBD Category | GATE Score cutoff |
| B-Bling, LV- Low Vision | 232 |
| D- Deaf, HH- Hard of hearing | 236 |
| OA- One Arm, OL- one leg, SD-Spine Deformity/SI-Spine injury (with associated limb dysfunction of OA, OL), CP-Cerebral Palsy, LC-Leprosy Cured, Dw-Dwarfism, AAV-Acid attach Victims, SD-Spine Deformity/ SI-Spine injury, without any associated neurological/ limb dysfunction | 332 |
| MD- Multiple Illness | 251 |
GATE Cutoff for ONGC Recruitment 2021
GATE Paper | Job Name | Category | cutoff |
Chemical Engineering | AEE (Production) - Chemical | General | 832 |
OBC | 792 | ||
SC | 617 | ||
ST | 442 | ||
EWS | 767 | ||
Chemical Engineering | AEE (Reservoir) - Chemical | General | 942 |
SC | 789 | ||
ST | 552 | ||
EWS | 891 | ||
Chemical Engineering | MM Officer- Chemical | General | 926 |
OBC | 909 | ||
SC | 838 | ||
ST | 789 | ||
EWS | 899 | ||
Civil Engineering | Assistant Engineer(Civil) | General | 878 |
OBC | 857 | ||
SC | 740 | ||
ST | 767 | ||
EWS | 838 | ||
Electrical Engineering | Assistant Executive Engineer (Electrical) | General | 846 |
OBC | 785 | ||
SC | 691 | ||
ST | 638 | ||
EWS | 774 | ||
Electrical Engineering | MM Officer (Electrical) | General | 926 |
OBC | 909 | ||
SC | 838 | ||
ST | 789 | ||
EWS | 899 | ||
Electronics and Communication Engineering | AEE (Electronics) | General | 898 |
OBC | 822 | ||
SC | 617 | ||
EWS | 836 | ||
Electronics and Communication Engineering | MM Officer (Electronics) | General | 926 |
OBC | 909 | ||
SC | 838 | ||
ST | 789 | ||
EWS | 899 | ||
Mechanical Engineering | AEE (Production) - Mechanical | General | 911 |
OBC | 869 | ||
SC | 806 | ||
ST | 751 | ||
EWS | 873 | ||
Mechanical Engineering | Transport Officer - Mechanical | General | 891 |
ST | 724 | ||
Mechanical Engineering | MM Officer - Mechanical | General | 926 |
OBC | 909 | ||
SC | 838 | ||
ST | 789 | ||
EWS | 899 | ||
Mechanical Engineering | AEE (Cementing) - Mechanical | General | 842 |
OBC | 809 | ||
SC | 659 | ||
Mechanical Engineering | AEE (Drilling) - Mechanical | General | 857 |
OBC | 844 | ||
SC | 727 | ||
ST | 648 | ||
EWS | 830 | ||
Mechanical Engineering | Assistant Engineer(Mechanical) | General | 880 |
OBC | 846 | ||
SC | 734 | ||
ST | 748 | ||
EWS | 865 | ||
Instrumentation Engineering | AEE (Instrumentation) | General | 694 |
OBC | 535 | ||
SC | 431 | ||
ST | 192 | ||
EWS | 612 | ||
Instrumentation Engineering | MM Officer (Instrumentation) | General | 926 |
OBC | 909 | ||
SC | 838 | ||
ST | 789 | ||
EWS | 899 |
GATE Cutoff for ONGC Recruitment 2019
Post | Category | Cutoff Score |
AEE (Mechanical) | UR | 856 |
OBC | 812 | |
SC | 695 | |
ST | 677 | |
EWS | 818 | |
AEE (Electronics) | UR | 868 |
OBC | 814 | |
SC | 692 | |
ST | 618 | |
EWS | 803 | |
AEE (Electrical) | UR | 841 |
OBC | 778 | |
SC | 693 | |
ST | 704 | |
EWS | 781 | |
AEE (Civil) | UR | 915 |
OBC | 841 | |
SC | 774 | |
ST | 808 | |
EWS | 871 |
GATE Cutoff for ONGC Recruitment 2017
Post | Gen | OBC | SC | ST | PwD -OH | PwD-HH |
Geologist | 576 | 396 | 396 | 232 | - | - |
Chemist | 577 | 422 | 311 | 316 | 265 | - |
AEE Production-Petroleum | 635 | 291 | 85 | 56 | - | - |
AEE Cementing -Mechanical | 810 | 750 | 599 | No Post | - | - |
AEE Electronics | 864 | 745 | 682 | 629 | 426 | 434 |
Geophysicist (Surface) | 580 | 425 | 337 | 217 | - | - |
Programming Officer | 848 | 779 | 742 | 578 | 270 | - |
AEE Production-Chemical | 659 | 539 | 470 | 358 | - | - |
AEE Cementing -Petroleum | 630 | 583 | No Post | No Post | - | - |
AEE Electrical | 801 | 728 | 589 | 610 | 342 | 316 |
Geophysicist (Wells) | 421 | 311 | 217 | 242 | - | |
AEE Mechanical | 789 | 654 | 585 | 508 | 324 | 293 |
AEE Drilling -Mechanical | 814 | 754 | 634 | 559 | - | - |
Transport Officer | 800 | 728 | 610 | 508 | 268 | - |
AEE Instrumentation | 781 | 689 | No Post | No Post | 254 | - |
AEE Reservoir | 653 | 495 | 384 | 274 | - | - |
AEE Production- Mechanical | 831 | 758 | 673 | 605 | - | - |
AEE Drilling- Petroleum | 624 | 519 | 92 | No Post | - | - |
MM Officer | 837 | 766 | 563 | No Post | 235 | 195 |
AEE Civil | 885 | 817 | 710 | 682 | 399 | 332 |
GATE Cutoff for ONGC Recruitment 2016
Designation | UR | OBC | SC | ST | PwD | Type of Pwd |
Geologist | 512 | 381 | 246 | 209 | 453 | Pwd -HH |
Geophysicist (Surface) | 635 | 434 | 234 | 203 | - | |
Geophysicist (wells) | 652 | 489 | 372 | 291 | - | |
AEE Reservoir | 716 | 527 | 424 | 479 | - | |
Chemist | 723 | 596 | 395 | 331 | 241 | PWD-OH |
Programming Officer | 852 | 706 | No Post | No Post | 362 | PWD-VH |
AEE Mechanical | 859 | 788 | 669 | 608 | 452 | PWD-OH |
287 | PWD-HH | |||||
AEE Production-Mechanical | 833 | 720 | 570 | 520 | - | - |
AEE Production-Chemical | 640 | 479 | 444 | 335 | - | - |
AEE Production-Petroleum | 696 | 320 | 156 | 161 | - | - |
AEE Drilling-Mechanical | 822 | 755 | 620 | 558 | - | - |
AEE Drilling-Petroleum | 562 | 325 | 265 | No Post | - | - |
AEE Cementing-Mechanical | 808 | 742 | 615 | 509 | - | - |
AEE Cementing-Petroleum | 642 | 533 | No Post | 196 | - | - |
Transport Officer | 799 | 745 | 571 | No Post | 443 | PWD-HH |
MM Officer | 836 | 758 | 693 | 525 | 323 | PWD-VH |
AEE Electronics | 910 | 832 | 662 | 534 | 379 | PWD-OH |
314 | PWD-HH | |||||
AEE Electrical | 869 | 800 | 710 | 710 | 397 | PWD-OH |
307 | PWD-HH | |||||
AEE Instrumentation | 798 | 734 | 500 | No Post | 325 | PWD-OH |
218 | PWD-HH | |||||
AEE Civil | 921 | 836 | 699 | 700 | 428 | PWD-OH |
For Power Grid recruitment, the candidates must have a valid GATE score for PSU and should have graduated in Electrical/ Electronics and Communication/ Civil/ Computer Science. Selection of candidates is based on GATE cutoff scores 2025, group discussions, and personal interviews.
The previous year GATE cutoff trends for Power Grid recruitment are mentioned below. Candidates can analyse the cutoff trends to apply for recruitment into Power Grid of India.
GATE Cutoff for POWERGRID Recruitment 2023
| GATE Paper | Category | Cutoff |
| Electrical | UR | 41.00 |
| OBC (NCL) | 37.33 | |
| SC | 29.33 | |
| ST | 29.00 | |
| EWS | 36.33 | |
| PwBD | LD-18.33 HI - SLD/MI | |
| Civil | UR | 65.72 |
| OBC (NCL) | 62.74 | |
| SC | 56.06 | |
| ST | 55.06 | |
| EWS | 59.53 | |
| PwBD | LD-30.01 SLD/MI | |
| Electronics | UR | 61.00 |
| OBC (NCL) | 57.33 | |
| PwBD | ASD/SLD /MI - | |
| Computer Science | UR | 63.00 |
| SC | 43.00 |
GATE Cutoff for POWERGRID Recruitment 2021
| GATE Paper | Job Name | Category Name | cutoff |
| Electrical Engineering | Engineer Trainee(Electrical) | General | 77 |
| Engineer Trainee(Electrical) | OBC | 73.33 | |
| Engineer Trainee(Electrical) | EWS | 71.33 | |
| Engineer Trainee(Electrical) | ST | 72 | |
| Electronics and Communication Engineering | ET (Electronics) | General | 63.67 |
| ET (Electronics) | OBC | 60.67 | |
| ET (Electronics) | EWS | 59.33 | |
| ET (Electronics) | SC | 52 | |
| ET (Electronics) | ST | 42.67 | |
| Civil Engineering | Engineer Trainee(Civil) | General | 83.92 |
| Engineer Trainee(Civil) | OBC | 82.16 | |
| Engineer Trainee(Civil) | EWS | 77.78 | |
| Engineer Trainee(Civil) | SC | 69.89 | |
| Electrical Engineering | Graduate Assistant Engineer Trainee(Electrical) | General | 68 |
| Graduate Assistant Engineer Trainee(Electrical) | OBC | 63.67 | |
| Graduate Assistant Engineer Trainee(Electrical) | SC | 51.33 | |
| Graduate Assistant Engineer Trainee(Electrical) | ST | 52.33 | |
| Electronics and Communication Engineering | Graduate Assistant Engineer Trainee(Electronics) | General | 50.67 |
| Graduate Assistant Engineer Trainee(Electronics) | OBC | 47.67 | |
| Graduate Assistant Engineer Trainee(Electronics) | SC | 39 | |
| Civil Engineering | Graduate Assistant Engineer Trainee(Civil) | General | 78.54 |
| Graduate Assistant Engineer Trainee(Civil) | OBC | 73.92 | |
| Graduate Assistant Engineer Trainee(Civil) | SC | 65 | |
| Graduate Assistant Engineer Trainee(Civil) | ST | 64.74 |
GATE Cutoff for POWERGRID Recruitment 2019 - 2020
| Branch Name | Category | Cutoff |
| Civil Engineering | General | 71.62 |
| EWS | 69.53 | |
| OBC | 66.08 | |
| SC | 63.45 | |
| ST | 59.19 | |
| Electrical Engineering | General | 84.33 |
| EWS | 81.33 | |
| OBC | 64.33 | |
| SC | 69.67 | |
| ST | 59.67 | |
| Electronics and Communication Engineering | General | 75 |
| EWS | 63.67 | |
| OBC | 73.33 | |
| SC | 52 | |
| ST | 53 |
GATE Cutoff for Power Grid Recruitment 2018
| Post | Category | Cutoff Score |
| AET (Electrical) | UR | 68.00 |
| OBC (NCL) | 63.67 | |
| SC | 51.33 | |
| ST | 52.33 | |
| PwD-LD | 25.67 | |
| AET (Electronics) | UR | 50.67 |
| OBC (NCL) | 47.67 | |
| SC | 39.00 | |
| PwD-HI | 20.67 | |
| AET (Civil) | UR | 78.54 |
| OBC (NCL) | 73.92 | |
| SC | 65.00 | |
| ST | 64.74 | |
| PwD-HI | 61.46 |
GATE Cutoff for Power Grid Recruitment 2017
Candidates can check the table to know the minimum marks in GATE for PSU CSE, Civil, Electrical, and Electronics.
Discipline | UR | OBC (NCL) | SC | ST | PwD | |
Electrical | 63.18 | 58.67 | 46.36 | 48.98 | OH-29.31 | HH-28.86 |
Electronics | 69.17 | 64.38 | 54.81 | 47.45 | - | - |
Civil | 81.66 | 75.85 | 67.91 | 63.59 | - | |
Computer Science | 68.53 | 61.67 | 58.92 | 42.85 | 38 | 91 |
GATE Cutoff for Power Grid Recruitment 2016
Discipline | UR | OBC (NCL) | SC | ST | PwD - Backlog (OH/HH) | PwD-O | PwD-H |
Electrical | 64.72 | 57.49 | 45.82 | 44.35 | 27.91 | 18.23 | |
Electronics | 68.75 | 65.32 | 55.85 | 49.13 | - | - | - |
Civil | 78.43 | 71.46 | 59.22 | 60.57 | - | - | - |
CS | 73.15 | 70.1 | 57.4 | - | - | - | - |
GATE Cutoff for Power Grid Recruitment 2015
Disciplines | UR | OBC (NCL) | SC | ST | PwD - Backlog (OH/HH) | PwD-O | PwD-H |
Electrical | 59.1 | 53.44 | 44.65 | 41.84 | 30.93 | 25.12 | 16.94 |
Civil | 73.49 | 66.71 | 60.11 | 53.78 | - | - | - |
CS | 70.67 | 66.6 | - | - | - | - | - |
Selection of candidates for recruitment into THDC will be based on GATE scores 2025. The THDC GATE 2025 cutoff will be updated here when it is released on the official website.
Candidates can check the cutoff for the recruitment process conducted in 2018 below.
GATE Cutoff for THDC Recruitment 2021
| GATE Paper | Job Name | Category Name | cutoff |
| Mechanical Engineering | Engineer Trainee(Mechanical) | General | 80.32 |
| Engineer Trainee(Mechanical) | OBC | 76.27 | |
| Engineer Trainee(Mechanical) | SC | 68.15 | |
| Engineer Trainee(Mechanical) | ST | 61.11 | |
| Electrical Engineering | Engineer Trainee(Electrical) | General | 69.67 |
| Engineer Trainee(Electrical) | OBC | 67 | |
| Engineer Trainee(Electrical) | SC | 54 | |
| Engineer Trainee(Electrical) | ST | 64 | |
| Civil Engineering | Engineer Trainee(Civil) | General | 77.53 |
| Engineer Trainee(Civil) | OBC | 74.14 | |
| Engineer Trainee(Civil) | SC | 65 | |
| Engineer Trainee(Civil) | ST | 65.73 |
GATE Cutoff for THDC Recruitment 2018
Discipline | Gen | OBC | SC | ST |
Civil Engineering | 77.53 | NA | NA | NA |
Electrical Engineering | 69.67 | 67 | 54 | NA |
Mechanical Engineering | 80.32 | NA | 68.15 | 61.11 |
Candidates can apply for the post of Junior Executive through AAI Recruitment 2025 based on their GATE scores. The AAI GATE 2025 cutoff scores will be updated here when released.
Check the previous year's cutoff from the table below for the probable scores to be secured.
GATE cutoff for AAI Recruitment 2024
| GATE Paper | Category | Cutoff |
| Electronics | UR | 643 |
| EWS | 553 | |
| OBC (NCL) | 573 | |
| SC | 474 | |
| ST | 464 | |
| PwBD | C-231 | |
| Architecture | UR | 845 |
| EWS | Nil | |
| OBC(NCl) | Nil | |
| SC | Nil | |
| ST | Nil | |
| PwBD | B-631 D&E- Nil | |
| Information Technology | UR | 852 |
| EWS | 833 | |
| OBC(NCL) | 820 | |
| SC | 734 | |
| ST | Nil | |
| PwBD | A-273 | |
| Civil | UR | 852 |
| EWS | 813 | |
| OBC(NCL) | 806 | |
| SC | 709 | |
| ST | 756 | |
| PwBD | B-254 C-609 275 | |
| Electrical | UR | 762 |
| EWS | 652 | |
| OBC(NCl) | 714 | |
| SC | 604 | |
| ST | 630 | |
| PwBD | B-271 C-363 D&E-240 |
GATE Cutoff for AAI Recruitment 2022
| GATE Paper | Category Name | cutoff |
| Electrical Engineering | General | 785 |
| OBC | 760 | |
| SC | 664 | |
| ST | 673 | |
| EWS | 750 | |
| PWD | B-298 C- Nil D&E- Nil | |
| Civil Engineering | General | 838 |
| OBC | 832 | |
| SC | 711 | |
| ST | Nil | |
| EWS | 793 | |
| PWD | B- 395 C- 249 D&E- Nil | |
| Electronics and Communication Engineering | General | 674 550 617 507 408 458 |
| OBC | 617 | |
| SC | 507 | |
| ST | 408 | |
| EWS | 550 | |
| PWD | C- 458 | |
| Architecture and Planning | General | 812 |
| EWS | 775 | |
| OBC | 781 | |
| ST | 727 |
GATE Cutoff for AAI Recruitment 2021
| GATE Paper | Job Name | Category Name | cutoff |
| Civil Engineering | Junior Engineer(Civil) | General | 72.32 |
| Junior Engineer(Civil) | OBC | 69.88 | |
| Junior Engineer(Civil) | SC | 62.8 | |
| Junior Engineer(Civil) | ST | 58.53 | |
| Junior Engineer(Civil) | EWS | 69.53 | |
| Electrical Engineering | Junior Engineer(Electrical) | General | 86.33 |
| Junior Engineer(Electrical) | OBC | 85 | |
| Junior Engineer(Electrical) | SC | 77 | |
| Junior Engineer(Electrical) | ST | 73 | |
| Junior Engineer(Electrical) | EWS | 84.33 | |
| Electronics and Communication Engineering | Junior Executive (Electronics) | General | 63.67 |
| Junior Executive (Electronics) | OBC | 57 | |
| Junior Executive (Electronics) | SC | 47.33 | |
| Junior Executive (Electronics) | ST | 39.33 | |
| Junior Executive (Electronics) | EWS | 56 | |
| Architecture and Planning | Junior Executive (Architecture) | General | 69.67 |
| Junior Executive (Architecture) | OBC | 65.67 | |
| Junior Executive (Architecture) | ST | 48.67 |
GATE Cutoff for AAI Recruitment
Post | GEN | OBC | SC | ST | PwD |
Junior Executive(Electronics) | 50.33 | 50 | 40 | 40.33 | - |
Junior Executive (Engineering Electrical) | 75.67 | 70.33 | 58.67 | 60.33 | 47.67 |
Junior Executive (Engineering Civil) | 80.48 | 75.56 | 68.02 | 69.4 | 48.35 |
Junior Executive (Architect) | 69.67 | 65.67 | - | 48.67 | - |
Mechanical, Electrical & Electronics and Metallurgy Engineering candidates will be able to apply for BEML recruitment through GATE 2025. The selection of candidates will be based on GATE scores 2025.
The previous year BEML GATE cutoff scores are mentioned below.
GATE Cutoff for BEML Recruitment 2017
Discipline | GATE Scores | GATE Marks | All India Rank in GATE 2017 |
Mechanical | 821 | 78.34 | 499 |
Electrical | 766 | 58.46 | 460 |
Metallurgy | 567 | 50.01 | 152 |
Graduate students in Mechanical, Electronics, Electrical, and Civil Engineering will be eligible for HAL Recruitment through GATE. Selection of the candidates will be based on the GATE cutoff scores and an interview.
GATE Cutoff for HAL Recruitment 2017
Post | Cut-off Score |
Management Trainee (Civil) | 62.72 to 79.47 |
Design Trainee | 41.38 to 81.09 |
Management Trainee | 41.38 to 81.09 |
For BHEL recruitment through GATE 2025, candidates will be selected as per GATE cutoff scores 2025 and a personal interview. Mechanical Engineering or Electrical engineering graduates will be eligible to apply.
The previous year BHEL GATE 2025 cutoff have been updated below
GATE Cutoff for BHEL Recruitment 2021
| GATE Paper | Job Name | Category Name | cutoff |
| Mechanical Engineering | Engineer Trainee(Mechanical) | General | 82.99 |
| Engineer Trainee(Mechanical) | OBC | 81.66 | |
| Engineer Trainee(Mechanical) | SC | 66.68 | |
| Engineer Trainee(Mechanical) | ST | 61.44 | |
| Electrical Engineering | Engineer Trainee(Electrical) | General | 74.33 |
| Engineer Trainee(Electrical) | OBC | 71 | |
| Engineer Trainee(Electrical) | SC | 54.33 | |
| Engineer Trainee(Electrical) | ST | 57 |
GATE Cutoff for BHEL Recruitment 2017
Cutoff for Interview Shortlisting | Cutoff for Final Selection | |||||||
Discipline | UR | OBC | SC | ST | UR | OBC | SC | ST |
Mechanical | 84.43 | NA | 72.49 | 61.58 | 86.24 | NA | 75.988 | 69.12 |
Electrical | 67.05 | NA | 50.24 | 48.13 | 72.73 | NA | 55.18 | 55.605 |
50% Relaxation over the cut-off marks accorded to Persons with Disabilities candidates for being invited for interviews. | ||||||||
GATE Cutoff for BHEL Recruitment 2016
Discipline | UR | OBC | SC | ST |
Mechanical | 79.31 | 75.18 | 61.33 | 53.84 |
Electrical | 69.98 | 66.04 | 53.99 | 50.59 |
Electronics | 68.68 | 65.32 | 56.46 | 49.13 |
Metallurgy | 65 | 57.67 | 56.67 | 48.67 |
Electronics & Communication/ Mechanical/ Electrical/ Material Science discipline candidates will be eligible for CEL recruitment through GATE 2025. The application form for the recruitment process will be available online mode.
Candidates can find the previous year CEL GATE cutoffs below
GATE Cutoff for CEL Recruitment 2016
Branch | Category | GATE Ranks |
E&C Engg. | General | 35 to 4423 |
OBC | 73 to 4900 | |
SC | 459 to 12484 | |
ST | 3950 to 28221 | |
PH | 1818 to 27466 | |
Electrical Engg. | General | 95 to 921 |
SC | 368 to 3372 | |
OBC | 54 to 1105 | |
ST | 1646 to 5680 | |
Mechanical Engg. | General | 61 to 1712 |
OBC | 12 to 1989 | |
SC | 1264 to 6618 | |
ST | 4939 to 14105 | |
Ceramic | General | 37 |
SC | 901 |
Chemical, Mechanical, Electrical, Instrumentation, Civil, and Business Information System (BIS) discipline candidates will be able to apply for GAIL Recruitment through GATE 2025. GAIL will release the recruitment advertisement on the official website. The selection of candidates will be based on the GATE 2025 performance. Candidates can check the table to know the GATE cutoff for PSU Chemical Engineering and Instrumentation Engineering.
The previous year GAIL cutoffs through GATE have been mentioned below
GATE Cutoff for GAIL Recruitment 2021-2022
| GATE Paper | Job Name | Category Name | cutoff |
| Chemical Engineering | Executive Trainee(Chemical) | General | 62 |
| OBC | 53.33 | ||
| SC | 53 | ||
| ST | 42.67 | ||
| EWS | 50 | ||
| Instrumentation Engineering | Executive Trainee(Instrumentation) | General | 52.67 |
| OBC | 52.67 | ||
| ST | 26 | ||
| EWS | 36.67 | ||
| Electrical Engineering | Graduate Executive Trainee(Electrical) | General | 57.35 |
| OBC | 54.67 | ||
| SC | 43.62 | ||
| ST | 42.95 | ||
| Mechanical Engineering | Executive Trainee(Mechanical) | General | 76.26 |
| OBC | 74.09 | ||
| ST | 57.38 |
| Branch Name | Category | Cutoff |
| Chemical Engineering | General | 62 |
| EWS | 50 | |
| OBC | 53.33 | |
| SC | 53 | |
| ST | 42.67 | |
| Instrumentation Engineering | General | 52.67 |
| EWS | 36.67 | |
| OBC | 52.67 | |
| SC | 26 | |
| ST | 26 |
GATE Cutoff for GAIL Recruitment 2017
Name Of The Post | UR | OPC (NCL) | SC | ST | PWD (HH) | PWD (OH) |
Executive Trainee (Chemical) | 144 | 215 | 312 | 744 | - | 2440 |
Executive Trainee (Mechanical) | 70 | 132 | - | 2679 | 41938 | - |
Executive Trainee (Electrical) | 75 | 135 | 999 | 1086 | - | - |
Executive Trainee (Instrumentation) | 73 | 96 | - | 1188 | - | - |
Executive Trainee (Civil) | 22 | 65 | - | 693 | - | - |
Executive Trainee (Business Information System) | 68 | 117 | 447 | - | - | - |
GATE Cutoff for GAIL Recruitment 2016
Post in Discipline | UR | OBC-NCL | SC | ST | PwD |
Executive Trainee in Chemical | 68.4 | 64 | 60.75 | 53 | - |
Executive Trainee in Mechanical | 82.58 | 80.37 | - | 73.72 | 53.41 |
Executive Trainee in Electrical | 77.95 | 74.54 | 66.24 | 61.82 | 43.03 |
Executive Trainee in Instrumentation | 75.37 | 70.50 | - | 56.23 | - |
Executive Trainee in Business Information System | 70.41 | 64.29 | 61.82 | - | - |
Executive Trainee in Telecom/Telemetry | 76.22 | 70.39 | 66.34 | 58.73 | 52.17 |
The application form for HPCL recruitment through GATE 2025 will be available online mode. All candidates are required to have a valid rank in GATE 2025. Mechanical, Civil, Electrical, Electronics & Telecommunication, Instrumentation, and Chemical Engineering candidates are eligible to apply.
Theprevious year GATE Cutoff fir HPCL have been mentioned below
GATE Cutoff for HPCL Recruitment 2016
Discipline | UR | OBC | SC | ST | PwD |
Mechanical | 75.14 | 70.69 | 58.34 | 50.85 | 38.87 |
Civil | 66.97 | 62.26 | 54.91 | 54.26 | 32.28 |
Electrical | 67.35 | 65.23 | 53.55 | 51.61 | 35.14 |
Instrumentation | 61.33 | 57.33 | 44.67 | 35.33 | 25.67 |
E &TC | 63.18 | 62.88 | 53.35 | 47.83 | 37.51 |
Chemical | 54 | 51.67 | 44.33 | 41 | 34 |
In BPCL recruitment through GATE 2025, the candidates will be shortlisted based on their rank in the Graduate Aptitude Test in Enginerring. Thereafter, a group discussion and personal interview will be conducted. The BPCL recruitment form will be available in online mode.
GATE Cutoff for BPCL Recruitment 2021
| GATE Paper | Job Name | CategoryName | cutoff |
| Mechanical Engineering | Management Trainee(Mechanical) | General | 76 |
| Management Trainee(Mechanical) | OBC | 71 | |
| Management Trainee(Mechanical) | SC | 55 | |
| Management Trainee(Mechanical) | ST | 47 |
GATE Cutoff for BPCL Recruitment
Discipline | GEN | OBC | SC | ST |
Mechanical | 68 | 65 | 54 | 46 |
Chemical | 57 | 55 | 47 | 40 |
Instrumentation | 60 | 58 | 43 | 33 |
Graduates in Mechanical or Electrical engineering will be eligible for MDL recruitment through GATE 2025. Selection of candidates will be based on GATE scores 2025 and personal interviews.
The MDL GATE previous year cutoffs have been updated below.
GATE Cutoff for MDL Recruitment 2017
| GATE Paper | Job Name | Category Name | cutoff |
| Mechanical Engineering | Executive Trainee(Mechanical) | General | 84.18 |
| Executive Trainee(Mechanical) | OBC | 79.8 | |
| Executive Trainee(Mechanical) | SC | 74.02 | |
| Executive Trainee(Mechanical) | ST | 67.51 | |
| Electrical Engineering | Graduate Executive Trainee(Electrical) | General | 88.33 |
| Graduate Executive Trainee(Electrical) | OBC | 84.33 | |
| Graduate Executive Trainee(Electrical) | SC | 79.67 | |
| Graduate Executive Trainee(Electrical) | ST | 74.33 |
Discipline | UR | OBC | SC | ST |
Mechanical | 91.09-81.38 | 81.37-76.93 | 81.03-76.92 | 76.93-65.95 |
Electrical | 79.63-63.65 | 62.25-54.12 | 58.33-55.09 | 60.53-52.06 |
GATE Cutoff for MDL Recruitment 2016
Discipline | Gen | OBC | SC | ST |
Electrical | 65.0 5 | 61.1 4 | 48.2 1 | 47.52 |
Mechanical | 78.9 4 | 76.3 5 | 61.6 5 | 53.10 |
The recruitment will be open for engineering graduates in Mechanical, Civil, Electrical, Electronics & Communication, Mining, Computer Science, and Control & Instrumentation Engineering.
Candidates can find the NLC GATE previous year cutoffs from the tables below
GATE Cutoff for NLC Recruitment 2017
Discipline | Minimum Cut-off Marks of Shortlisted Candidates | ||||
UR | OBC | SC | ST | PWD | |
Mechanical | 81.78 | 74.89 | 72.46 | 61.92 | 46.30 |
Electrical - EEE | 66.06 | 62.27 | S2.29 | 49.60 | 39.30 |
Electrical - ECE | 68.54 | 66.67 | 55.11 | NR | 35.18 |
Civil | 83.81 | 72.60 | 70.09 | 71.17 | 44.67 |
Control & Instrumentation | 79.68 | 70.3S | 59.36 | NR | NR |
Mining | 49.03 | 46.36 | 32.04 | 31.04 | NR |
Computer | 78.67 | 62.23 | 53.86 | 43.90 | 33.65 |
Phase 1 NLC Cutoff (out of 100)
Discipline | UR | OBC | SC | ST |
Mechanical | 78.44 | 72.52 | 61.71 | 55.06 |
Electrical - EEE | 71.62 | 66.25 | 61.11 | 52.63 |
Electrical - ECE | 68.68 | 62.93 | 55.2 | NR |
Civil | 71.69 | NR | 56.53 | NR |
Instrumentation | 70.33 | 65.33 | 49.67 | 49.67 |
Mining | 49.67 | 40.33 | 31 | 28.67 |
Computer | 68.23 | 63.76 | NR | NR |
Phase 2 NLC Cutoff (out of 100)
Discipline | UR | OBC | SC | ST |
Mechanical | 78.29 | 72.32 | 61.65 | 54.97 |
EEE | 71.36 | 60.81 | - | |
ECE | 68.38 | 62.88 | - | - |
CIVIL | 71.46 | - | 55.91 | - |
C&I | 70 | 64 | - | 42.33 |
Computer | 67.9 | - | - | - |
Phase 3 NLC Cutoff (out of 100)
Discipline | UR | OBC | SC | ST |
EEE | 66.04 | 61.14 | 51.27 | 52.3 |
ECE | 64.03 | 56.67 | 54.32 | - |
Civil | 66.5 | - | - | - |
Candidates who graduated in the disciplines of Electronics and Communication, Computer Science and Information Technology, and Electrical Engineering and have a valid GATE score 2025 will be eligible for the recruitment process.
GATE Cutoff for BBNL Recruitment 2017
UR | OBC | SC | ST |
65.02 | 61.93 | 50.59 | 48.82 |
GATE Cutoff for BBNL Recruitment 2016
UR | OBC | SC | ST |
61.86 | 58.37 | 46.26 | 43.87 |
Selection of candidates for WBSEDCL recruitment will be done based on the GATE 2025 rank. The application form for the recruitment process will be available in online mode.
GATE Cutoff for WBSEDCL Recruitment 2017
Category | Mechanical | Electrical |
UR | 78.29 | 63.08 |
UR (EC) | - | 27.43 |
OBC (A) | 35.87 | 23.34 |
OBC (B) | 67.93 | 46.65 |
SC | 60.70 | 34.24 |
ST | 29.40 | 20.62 |
PWD - HI | 47.48 | 18.23 |
OC | 34.01 | 28.57 |
Candidates who studied Mechanical, Chemical, Metallurgical, Electrical, Electronics, Computer Science, Instrumentation, Civil and Nuclear Engineering during graduation will be eligible for BARC/OCES/DGFS recruitment through GATE. Non-GATE candidates will have to appear for a special test. A personal interview will be held got both GATE and Non-GATE candidates.
GATE Cutoff for BARC/OCES/DGFS Recruitment 2021
| GATE Paper | Job Name | Category | cutoff |
| Civil Engineering | Scientific Officer (Group-A post of Government of India) | General | 855 |
| OBC | 855 | ||
| SC | 855 | ||
| ST | 855 | ||
| EWS | 855 | ||
| Chemical Engineering | Scientific Officer (Group-A post of Government of India) | General | 725 |
| OBC | 725 | ||
| SC | 725 | ||
| ST | 725 | ||
| EWS | 725 | ||
| Computer Science and Information Technology | Scientific Officer (Group-A post of Government of India) | General | 880 |
| OBC | 880 | ||
| SC | 880 | ||
| ST | 880 | ||
| EWS | 880 | ||
| Chemistry | Scientific Officer (Group-A post of Government of India) | General | 775 |
| OBC | 775 | ||
| SC | 775 | ||
| ST | 775 | ||
| EWS | 775 | ||
| Electronics and Communication Engineering | Scientific Officer (Group-A post of Government of India) | General | 840 |
| OBC | 840 | ||
| SC | 840 | ||
| ST | 840 | ||
| EWS | 840 | ||
| Electrical Engineering | Scientific Officer (Group-A post of Government of India) | General | 859 |
| OBC | 859 | ||
| SC | 859 | ||
| ST | 859 | ||
| EWS | 859 | ||
| Geology and Geophysics | Scientific Officer (Group-A post of Government of India) | General | 730 |
| OBC | 730 | ||
| SC | 730 | ||
| ST | 730 | ||
| EWS | 730 | ||
| Instrumentation Engineering | Scientific Officer (Group-A post of Government of India) | General | 770 |
| OBC | 770 | ||
| SC | 770 | ||
| ST | 770 | ||
| EWS | 770 | ||
| Mechanical Engineering | Scientific Officer (Group-A post of Government of India) | General | 830 |
| OBC | 830 | ||
| SC | 830 | ||
| ST | 830 | ||
| EWS | 830 | ||
| Metallurgical Engineering | Scientific Officer (Group-A post of Government of India) | General | 722 |
| OBC | 722 | ||
| SC | 722 | ||
| ST | 722 | ||
| EWS | 722 | ||
| Physics | Scientific Officer (Group-A post of Government of India) | General | 720 |
| OBC | 720 | ||
| SC | 720 | ||
| ST | 720 | ||
| EWS | 720 | ||
| XL Food Technology | Scientific Officer (Group-A post of Government of India) | General | 830 |
| OBC | 830 | ||
| SC | 830 | ||
| ST | 830 | ||
| EWS | 830 |
GATE Cutoff for BARC/OCES/DGFS Recruitment 2017
Discipline | GATE Cut-off Marks |
Mechanical | 824 |
Chemical | 680 |
Metallurgy | 646 |
Electrical | 801 |
Electronics | 807 |
Computer | 790 |
Instrumentation | 766 |
Civil | 809 |
Physics | 651 |
Chemistry | 678 |
Bioscience | 746 |
Geology | 640 |
Geophysics | 659 |
GATE Cutoff for BARC/OCES/DGFS Recruitment 2016
Discipline | Cutoff GATE Score for Selection to Interviews |
Mechanical Engineering (ME) | 784 |
Chemical Engineering (CH) | 623 |
Metallurgical Engineering (MT) | 606 |
Electrical Engineering (EE) | 769 |
Electronics Engineering (EC) | 789 |
Computer Science (CS) | 745 |
Instrumentation Engineering (IN) | 696 |
Civil Engineering (CE) | 798 |
Physics (PH) | 671 |
Chemistry (CY) | 660 |
Bioscience (XL or BT) | 685 |
Geology (GG) | 593 |
Geophysics (GG) | 837 |
The application form for NHPC Recruitment through GATE 2025 will be available in online mode. The selection of candidates will be based on GATE scores 2025. Moreover, candidates have to fulfil the other eligibility conditions.
GATE Cutoff for NHPC Recruitment 2022 (Post - Trainee Engineer )
| GATE Paper | Category | Cutoff marks |
| Mechanical | OBC | 55.40 |
| SC | 42.83 | |
| ST | 37.20 | |
| PwBD | C- 23.27 | |
| Electrical | OBC | 65 |
| SC | 51.33 | |
| ST | 44 | |
| PwBD | C-22.33 | |
| Civil | OBC | 69.48 |
| SC | 55.89 | |
| ST | 58.96 | |
| PwbD | B-66.63 C-36.30 |
GATE Cutoff for NHPC Recruitment 2021
| Job Name | Caste Name | cutoff |
| Engineer Trainee(Civil) | General | 86 |
| Engineer Trainee(Civil) | OBC | 81.98 |
| Engineer Trainee(Civil) | SC | 76.41 |
| Engineer Trainee(Civil) | ST | 81.32 |
| Engineer Trainee(Civil) | EWS | 84.91 |
| Engineer Trainee(Civil) | General | 59.17 |
| Engineer Trainee(Mechanical) | General | 80.25 |
| Engineer Trainee(Mechanical) | OBC | 78.85 |
| Engineer Trainee(Mechanical) | SC | 77.11 |
| Engineer Trainee(Mechanical) | ST | 70.13 |
| Engineer Trainee(Mechanical) | EWS | 79.63 |
| Engineer Trainee(Mechanical) | General | 57.56 |
GATE Cutoff for NHPC Recruitment
Posts/ Disciplines | Gen | OBC | SC | ST |
TE (Electrical) | 72.6 | 72.38 | 69.67 | - |
TE (Civil) | 79.1 | 74.72 | 61.21 | - |
TE (Mechanical) | 87.83 | 83.3 | 75.18 | 66.67 |
TE (Geology) | 53.67 | 44.67 | 35 | - |
Candidates who have graduated with Geology and Geophysics will be eligible for MECL recruitment through GATE 2025. Engineering graduates have to apply for the MECL recruitment online. A detailed notification regarding the recruitment will be released on the MECL official website.
GATE Cutoff for MECL Recruitment 2021
| Job Name | Caste Name | cutoff |
| Executive Trainee(Chemist) | General | 37 |
| Executive Trainee(Chemist) | OBC | 24 |
| Executive Trainee(Chemist) | SC | 17 |
| Executive Trainee(Chemist) | ST | 19 |
GATE Cutoff for MECL Recruitment 2017
S.No | Name of the Post | Category | Cutoff Marks |
1 | ET (Geology) | UR | 41.07 |
OBC NCL | 30.35 | ||
SC | 22.39 | ||
ST | 22.39 | ||
2 | ET (Geo-Physics) | UR | 44.04 |
OBC NCL | 31.70 | ||
SC | 31.76 | ||
ST | 24.40 |
GATE Cutoff for MECL Recruitment 2016
Discipline | UR | OBC (NCL) | SC | ST |
ET(Geology) | 46.67 | 37.00 | 34.33 | 28.67 |
ET(Geo-physics) | 63.33 | 51.67 | - | - |
ET(Mech) | 73.67 | 68.33 | 69.33 | 59.33 |
ET(Petroleum) | 59.67 | SO.33 | 13.33 | - |
The authority will release the notification regarding the OIL India recruitment through GATE 2025 on the official website. Candidates have to fulfil the eligibility conditions and fill the recruitment form. Indian engineering graduates in Mechanical Engineering or postgraduates in Geology and Geophysics will be shortlisted for recruitment as Engineers/Officers based on their GATE cutoff scores 2025.
Discipline wise GATE 2016 Cutoff for Shortlisting
Discipline | GATE Marks |
Mechanical | 48.23 |
Geology | 39.00 |
Geophysics | 25.00 |
GATE Cutoff for OIL India Recruitment in 2016
Discipline | UR | OBC(NCL) | SC | ST | PWD |
Mechanical | 80.87 | 74.83 | 66.99 | 53.10 | 48.23 |
Geology | 50.67 | 43.00 | 36.67 | 39.00 | NA |
Geophysics | 67.67 | 56.00 | NA | NA | 25.00 |
GATE Cutoff Scores for PSU Recruitment in 2015
PSU | Branch | Gen | OBC | SC | ST | PWD |
HPCL | Mechanical | 68.45 | 60.90 | 50.59 | 41.94 | 34.40 |
Civil | 70.04 | 63.04 | 54.05 | 51.38 | 39.38 | |
Electrical | 58.64 | 53.39 | 45.30 | 41.58 | 32.75 | |
Instrumentation | 44.33 | 39.33 | 30.67 | 21.00 | 17.00 | |
E&TC | 73.05 | 69.69 | 59.14 | 54,67 | 43.92 | |
Chemical | 56.67 | 44.00 | 42.00 | 32.67 | 26.67 | |
NTPC | Electrical | 58.72 | 54.17 | 45.31 | 45.63 | 27.17 |
Mechanical | 80.94 | 76.37 | 66.17 | 53.16 | 42.65 | |
Electronics | 69.17 | 60.54 | 54.64 | - | 49.54 | |
Instrumentation | 63 | 55 | 45 | - | 30.33 | |
ONGC | Electronics | 856 | 856 | - | 639 | - |
CSE | 867 | - | - | 496 | - | |
Electrical | 817 | 736 | 683 | 670 | - | |
Mechanical | 750 | 721 | 644 | 507 | - | |
Instrumentation | 754 | 738 | 641 | 495 | - | |
Civil | 888 | 844 | 0 | 754 | - | |
BHEL | Mechanical | 64.67 | 58.00 | 48.00 | 39.67 | - |
Electrical | 73.67 | 65.00 | 55.67 | 51.33 | - | |
Electronics | 74.67 | 70.33 | 58.33 | 51.67 | - | |
MDL | Mechanical | 79.54 | 77.32 | 60.90 | 52.87 | - |
Electrical | 59.58 | 57.45 | 43.34 | 43.88 | - | |
CEL * | ECE | 766 | 1445 | 4480 | 6027 | 39684 |
Mechanical | 304 | 332 | 2773 | - | - | |
Electrical | 215 | 358 | 2155 | - | - | |
* The GATE Ranks are mentioned and not scores | ||||||
Powergrid | Electrical | 59.10 | 53.44 | 44.65 | 41.84 | - |
Civil | 73.49 | 66.71 | 60.11 | 53.78 | - | |
70.67 | 66.60 | - | - | - | ||
GAIL | Mechanical | 63.33 | 61.33 | 49.00 | 38.33 | - |
Electrical | 72.67 | 68.00 | 54.00 | 49.00 | - | |
Instrumentation | 47.67 | 45.33 | 34.00 | 18.33 | - | |
Chemical | 58.67 | 53.67 | 40.67 | 43.67 | - | |
NBCC | Civil | 60 & above | 45 & above | 45 & above | 45 & above | - |
RITES | Civil | 61.53 | - | 37.85 | 20.87 | - |
Mechanical | 77.32 | 49.29 | - | - | - | |
Electrical | 59.42 | 55.48 | 48.59 | 23.33 | - | |
S & T | 69.41 | - | - | 47.96 | - | |
IRCON * | Electrical | 99.78 | 97.50 | 96.81 | 91.62 | - |
Mechanical | 99.83 | 99.30 | - | - | - | |
Civil | 99.67 | 92.42 | 89.72 | - 72.67 | - | |
For admission shortlisting, the authorities will check the GATE 2025 rank of the candidates.
While some PSU recruitment through GATE selects candidates based on their secured scores, many use GATE scores for shortlisting purposes. Tests, personal interviews, or group discussions may be additionally held for recruitment purposes.
A service bond agreement may have to be signed by the candidates if selected by a PSU. The candidates are advised to check the service bond carefully.
Candidates have to note that the cutoffs listed above are previous years’ cutoffs. The cutoff will differ for each PSU and the discipline of the candidate.
Counselling Date:01 August,2025 - 09 August,2025
Counselling Date:02 August,2025 - 04 August,2025
Others:11 August,2025 - 11 August,2025
GATE exam for Electrical and Electronics Engineering:
The GATE is conducted annually, usually in February. For Electrical and Electronics Engineering (EE), the exam covers core subjects like:
Electrical Circuits
Signals & Systems
Power Systems
Electrical Machines
Control Systems
Analog & Digital Electronics
Power Electronics
Electromagnetic Fields
Engineering Mathematics
Eligibility: Bachelor’s degree (final year or completed) in Engineering/Technology.
Admission Process:
Score is used for PG admissions (M.Tech, ME, MS) and PSU recruitment.
Exam Mode: Online (CBT)
Exam Duration: 3 hours
Question Types: MCQs, MSQs, and NATs
Total Marks: 100
Next Steps:
GATE 2026 application is expected to start in September 2025 on the official GATE portal.
BITS Pilani
VIT Vellore (Vellore Institute of Technology)
SRM Institute of Science and Technology, Chennai
Amrita Vishwa Vidyapeetham
Shiv Nadar University
IIIT-Hyderabad (for select PG programs)
DAIICT, Gandhinagar
UPES Dehradun
MIT-WPU Pune (MIT World Peace University)
RV College of Engineering, Bangalore
A GATE score of around 253 is not enough for top IITs or NITs, but you can still get admission into some private engineering colleges, especially in less competitive branches like Civil or Production. However, you might not receive a monthly stipend and will have to manage most of the expenses on your own.
GATE Textile Fiber (TF) focuses on subjects like textile technology, fiber science, yarn & fabric manufacturing, and finishing. The exam includes 65 questions—10 from General Aptitude and 55 from core TF subjects.
Total marks are 100, and the duration is 3 hours. It opens opportunities in PSUs, research, and M.Tech/M.E. admissions in textile-related fields.
Preparing from NITRA books, IIT Delhi lecture notes, and past papers is highly recommended.
Hi ,
It’s great that you're exploring interdisciplinary options like Environmental Engineering at IIT Delhi. The eligibility for MTech programs at IITs usually depends on the specific department requirements. Since your background is in Computer Science and you're planning to apply with a GATE score in Environmental Science and Engineering , it's important to note that IIT Delhi’s Civil Engineering department generally prefers students with core branches such as Civil, Chemical, Environmental, or Biotechnology.Some interdisciplinary and research-oriented programs may consider applicants from varied backgrounds if the student shows strong foundational understanding and interest in environmental applications. However, just qualifying the GATE-ES paper doesn’t automatically guarantee eligibility the department’s brochure or admission portal will clarify this.
You should carefully check the admission brochure and contact the department directly for confirmation if needed. Also, keep checking on the shortlisting criteria they usually publish it each year for transparency.
All the best!
A flight attendant ensures passenger safety and comfort during flights. Key duties include conducting safety checks, assisting passengers, serving food and drinks, and managing emergencies. They must be well-trained in safety procedures and customer service. A high school diploma is typically required, followed by rigorous training to qualify for the role.
A Flight Engineer monitors and operates an aircraft’s complex systems like engines, fuel, and hydraulics during flight, ensuring optimal performance and safety. They assist pilots with technical issues, conduct inspections, and maintain records. This role requires strong technical knowledge, problem-solving, and communication skills. Training usually involves a degree in aviation or aerospace engineering and specialised certification.
An Aircrew Officer operates and navigates aircraft, ensuring safe flights and compliance with aviation regulations. Key duties include managing flight systems, conducting pre- and post-flight checks, and adhering to safety standards. The role typically requires working five days a week, with around 120 flight hours monthly. Employment may be contractual or permanent, depending on the airline.
An aerospace engineer designs, develops, tests, and maintains aircraft, spacecraft, and related systems. They apply physics and engineering principles to improve aerospace technologies, often working in aviation, defence, or space sectors. Key tasks include designing components, conducting tests, and performing research. A bachelor’s degree is essential, with higher roles requiring advanced study. The role demands analytical skills, technical knowledge, precision, and effective communication.
An air hostess, or flight attendant, ensures passenger safety and comfort during flights. Responsibilities include safety demonstrations, serving meals, managing the cabin, handling emergencies, and post-flight reporting. The role demands strong communication skills, a calm demeanour, and a service-oriented attitude. It offers opportunities to travel and work in the dynamic aviation and hospitality industry.
An aeronautical engineer designs, develops, tests, and maintains aircraft and related systems. They work on components like engines and wings, ensuring performance, safety, and efficiency. The role involves simulations, flight testing, research, and technological innovation to improve fuel efficiency and reduce noise. Aeronautical engineers collaborate with teams in aerospace companies, government agencies, or research institutions, requiring strong skills in physics, mathematics, and engineering principles.
A Safety Manager ensures workplace safety by developing policies, conducting training, assessing risks, and ensuring regulatory compliance. They investigate incidents, manage workers’ compensation, and handle emergency responses. Working across industries like construction and healthcare, they combine leadership, communication, and problem-solving skills to protect employees and maintain safe environments.
An airline pilot operates aircraft to transport passengers and cargo safely. Responsibilities include pre-flight planning, in-flight operations, team collaboration, and post-flight duties. Pilots work in varying schedules and environments, often with overnight layovers. The demand for airline pilots is expected to grow, driven by retirements and industry expansion. The role requires specialized training and adaptability.
Welding Engineer Job Description: A Welding Engineer work involves managing welding projects and supervising welding teams. He or she is responsible for reviewing welding procedures, processes and documentation. A career as Welding Engineer involves conducting failure analyses and causes on welding issues.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
An architect plans and designs buildings, ensuring they are safe, functional, and aesthetically pleasing. They collaborate with clients, engineers, and contractors throughout the construction process. Key skills include creativity, design software proficiency, and knowledge of building codes. In India, a 5-year B.Arch degree and registration with the Council of Architecture are required to practise professionally.
Having a landscape architecture career, you are involved in site analysis, site inventory, land planning, planting design, grading, stormwater management, suitable design, and construction specification. Frederick Law Olmsted, the designer of Central Park in New York introduced the title “landscape architect”. The Australian Institute of Landscape Architects (AILA) proclaims that "Landscape Architects research, plan, design and advise on the stewardship, conservation and sustainability of development of the environment and spaces, both within and beyond the built environment". Therefore, individuals who opt for a career as a landscape architect are those who are educated and experienced in landscape architecture. Students need to pursue various landscape architecture degrees, such as M.Des, M.Plan to become landscape architects. If you have more questions regarding a career as a landscape architect or how to become a landscape architect then you can read the article to get your doubts cleared.
Urban Planning careers revolve around the idea of developing a plan to use the land optimally, without affecting the environment. Urban planning jobs are offered to those candidates who are skilled in making the right use of land to distribute the growing population, to create various communities.
Urban planning careers come with the opportunity to make changes to the existing cities and towns. They identify various community needs and make short and long-term plans accordingly.
A plumber installs, maintains, and repairs water, gas, and waste systems in homes and buildings. Their duties include fixing leaks, installing fixtures, testing systems, ensuring safety compliance, and working with other professionals on projects. They also document repairs and may supervise apprentices. Plumbers play a key role in ensuring public health and the smooth functioning of essential utilities.
Individuals who opt for a career as construction managers have a senior-level management role offered in construction firms. Responsibilities in the construction management career path are assigning tasks to workers, inspecting their work, and coordinating with other professionals including architects, subcontractors, and building services engineers.
Individuals who opt for a career as an environmental engineer are construction professionals who utilise the skills and knowledge of biology, soil science, chemistry and the concept of engineering to design and develop projects that serve as solutions to various environmental problems.
Individuals who opt for a career as geothermal engineers are the professionals involved in the processing of geothermal energy. The responsibilities of geothermal engineers may vary depending on the workplace location. Those who work in fields design facilities to process and distribute geothermal energy. They oversee the functioning of machinery used in the field.
Energy efficiency engineering is a broad field of engineering which deals with energy efficiency, energy services, facility management, plant engineering, and sustainable energy resources. Energy efficiency engineering is one of the most recent engineering disciplines to emerge. The field combines the knowledge and understanding of physics, chemistry, and mathematics, with economic and environmental engineering practices. The main job of individuals who opt for a career as an energy performance engineer is to find the most efficient and sustainable path to operate buildings and manufacturing processes.
Individuals who opt for a career as energy performance engineers apply their understanding and knowledge to increase efficiency and further develop renewable sources of energy. The energy efficiency engineers also examine the use of energy in those procedures and suggest the ways in which systems can be improved.
A geologist attempts to comprehend the historical backdrop of the planet we live on, all the more likely to anticipate the future and clarify current events. He or she analyses the components, deployments, results, physical characteristics, and past of the planet. A geologist examines the landforms and landscapes of the earth in relation to the geology, climatic, and human processes that have shaped them.
A geologist studies earth procedures, for example, seismic tremors, avalanches, floods, and volcanic eruptions to review land and draw up safe structure plans. When he or she researches earth materials, explores metals and minerals, yet in addition search for oil, petroleum gas, water, and strategies to extricate these.
A career as a Petroleum engineer is concerned with activities related to producing petroleum. These products can be in the form of either crude oil or natural gas. Petroleum engineering also requires the exploration and refinement of petroleum resources. Therefore, a career as a petroleum engineer comes up with oil and gas onshore jobs. There are also desk jobs in the petroleum industry. In layman’s terms, a petroleum engineer is a person who finds the best way to drill and extract oil from oil wells. Individuals who opt for a career as petroleum engineer also tries to find new ways to extract oil in an efficient manner.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
A career as a civil engineer is of great importance for the infrastructural growth of the country. It is one of the most popular professions and there is great professional as well as personal growth in this civil engineering career path. There is job satisfaction in this civil engineering career path, but it also comes with a lot of stress, as there are multiple projects that need to be handled and have to be completed on time. Students should pursue physics, chemistry and mathematics in their 10+2 to become civil engineers.
A career as a Transportation Engineer is someone who takes care of people's safety. He or she is responsible for designing, planning and constructing a safe and secure transportation system. The transportation sector has seen a huge transformation and is growing day by day and improving every day.
As a Transport Engineer, he or she needs to solve complex problems such as accidents, costs, traffic flow, and statistics. A Transport Engineer also collaborates for projects with some other companies.
A Loco Pilot operates trains, ensuring safe and timely transport of passengers or goods. Starting as an Assistant Loco Pilot, one can progress to senior roles with experience. The job demands technical knowledge, focus, and adherence to safety protocols. It involves coordination with train staff and may require working long hours under pressure.
Ranked amongst top 3% universities globally (QS Rankings).
NAAC A+ Accredited | Scholarships worth 5 CR
Apply for an Online MBA from Amity Online.
Apply for Online MBA from Manipal Academy of Higher Education (MAHE)
Ranked #46 Among Universities in India by NIRF | 1950+ Students Placed 91% Placement, 590+ Recruiters
NAAC A+ Grade | Ranked No.1 Private University in India (QS World University Rankings 2025)
