Your browser does not support iframes.
Haryana LEET 2020 - HSTES will conduct Haryana LEET 2020 tentatively in the fourth week of May. The online application form for the same will be available tentatively in the third week of April. Haryana LEET 2020 is an online entrance test (OLET) which is conducted for admission to the second year B.E/B.Tech course to the participating institutes. Kashmiri migrants will be admitted to the University on the basis of marks scored in the qualifying exam (10th). One seat in each University will be reserved for Kashmiri migrants. The admit card of Haryana LEET 2020 will be released tentatively in the second week of May. There will be three rounds of Haryana LEET 2020 counselling and seat allotment will be done on the basis of merit list. It should be noted that seats in all the Universities participating in Haryana LEET will be filled against 15% Haryana quota. Read the article to know more about Haryana LEET 2020.
APPLICATIONS OPEN NOW
Name of Examination
Haryana Lateral Entry Entrance Test (Haryana LEET)
Haryana State Technical Education Society (HSTES)
Admission to the second year of BE/B.Tech courses in the participating institutes
Level of Haryana LEET 2020
Mode of Entrance Test (OLET)
Types of Admission
General, OBC, SC/CT & Tuition Fee Waiver (TFW) Categories- Admission will be done on the basis of marks in the entrance test (online off-campus counselling).
Kashmiri Migrants Category- Admissions will be done on the basis of the marks in qualifying exam (offline counselling).
Haryana LEET 2020 will be conducted for the following categories,
Candidates applying as regular students
Candidates applying under Tuition Fee Waiver (TFW) scheme
Candidates applying under Kashmiri Migrants (KM) category
Mode of Application
Mode of Counselling
Candidates can check the important dates of Haryana LEET 2020 from the table given below to know when the various examination and admission procedure is likely to commence and end.
Haryana LEET 2020 Important Dates (Tentative)
For 1st & 2nd counselling
For 3rd & 4th counselling
Merit/ Rank of OLET-2020/ Inter-se-merit of qualifying examination
Inter-se-merit of qualifying examination
TFW/ KM/EWS categories
Third week of July to Last week of July 2020
Starting date of online application form
Third week of April to first week of May 2020
Third week of April to last week of June 2020
The last date of fee deposition either online or offline
Online - Third week of April to first week of May 2020
E-challan - Third week of April to first week of May 2020
For KM only-
Online - Third week of April to last week of May 2020
E-challan - Third week of April to first week of July 2020
Online -Third week of July to Last week of July 2020
E-challan - Third week of July to Last week of July 2020
Reporting of candidates at the designated centre for verification & confirmation of qualifying marks
Third week of April to first week of July 2020
Third week of July to last week of July 2020
Haryana LEET admit card 2020
Second week of May 2020
Date of online entrance test (OLET)
Fourth week of May 2020
Issue of OLET merit list and rank card
Second week of June 2020
Last date to deposit the counselling fee
Second week of June to third week of June 2020
Last week of July 2020
Counselling Schedule of Haryana LEET 2020
Important Dates (Tentative)
First week to Second week of July 2020
Second week to Third week of July 2020
Fourth week of July to First week of August 2020
Haryana LEET 2020 is conducted for admissions to 2nd year (3rd semester) of B.E or B.Tech courses. In order to get admission to the participating institutes, candidates should meet the eligibility criteria prescribed by the authorities. Candidates can check the eligibility criteria of Haryana LEET 2020 below.
Haryana LEET 2020 Eligibility Criteria
Should have passed 12th standard with Physics and Chemistry as compulsory subjects along with Biology/Mathematics OR
Candidates should have completed 12th standard (Science) with Mathematics or with Technical Vocational subject OR
Should have qualified 10th standard + two years ITI with relevant trade OR
Candidates should have scored at least 45% aggregate marks (40% for candidates belonging to the reserved category) in Diploma in Engg./ Technology of at least 3 years from the Haryana State Board of Technical Education or its equivalent OR
Candidates should have passed B.Sc from a recognised university with at least 45% aggregate marks (40% for candidates belonging to the reserved category). Candidates should also have Maths as a compulsory subject in class 12th.
If candidates belong to B.Sc stream then they should have cleared the subjects of Engineering Graphics/Engineering Drawing and Engineering Mechanics of the first-year engineering program along with the second year subjects.
Also, B.Sc stream candidates will be considered only after filling the supernumerary seats in this category with students belonging to the Diploma stream.
Candidates should have qualified D.Voc. stream in the same or allied sector.
Note- For Kashmiri Migrants (KM), the relaxation in cut-off percentage up to 10% subject to minimum eligibility requirement.
The authorities will release the application form of Haryana LEET 2020 tentatively in the third week of April and all the candidates should complete and submit it before the last day. Candidates will be able to access the online application form on the official website.
Candidates will have to enter the certain details to fill the application form and it will include sections like personal details, qualification details, address, and parent(s) details.
After entering all the necessary details, candidates will have to next proceed towards uploading signature and photograph as per the specifications prescribed by the authorities. Both colour photograph and signature should be in JPEG format and size of the photograph should not be more than 30 KB, whereas the size of signature should not be more than 20 KB.
Next, candidates will have to submit the form and will have to pay the online application fee through online (debit cards, credit cards, net banking) or offline (e-challan). E-challan should be deposited in Axis Bank or Punjab National Bank.
Reserved Category (SC/KM/PHBC/FF/ESM//TFW/Girls)
Finally, after submitting the application form of Haryana LEET 2020 successfully, candidates should take a print out of the confirmation page for future references.
Haryana LEET 2020 will be conducted in many centres and candidates will have to select the preferred choices (maximum three cities) while filling out the application form. A list of exam centres of Haryana LEET 2020 is given below.
Haryana LEET 2020 Exam Centres
Name of Exam Centres
University Institute of Engineering & Technology, Kurukshetra University, Kurukshetra
Department Of Engineering & Technology, Maharshi Dayanand University, Rohtak
University Computer & Informatics Centre, GJU of Sc. & Tech., Hisar
YMCA University of Science & Technology, Faridabad.
Government Polytechnic, Nilokheri
Deenbandhu Chhotu Ram Univ. of Sc. & Tech., Murthal, Sonepat
Government Polytechnic, Ambala
Indira Gandhi University, Meerpur (Rewari)
Government Polytechnic, Manesar (Gurgaon)
As per the exam pattern of Haryana LEET 2020, there will be one question paper having 90 questions and candidates will be required to complete the exam within the duration of 90 minutes. For each correct answer, candidates will be awarded one mark and there will not be any negative marking for incorrect responses. The question paper will have different sections and the detailed pattern of the question paper is given below.
Haryana LEET 2020 Exam pattern
No. of questions
Electronics stream courses
Elements of electrical engineering
Elements of electronic engineering
Elements of computer engineering
Mechanical stream courses
Elements of mechanical engineering
Elements of production Engg./manufacturing processes
Other engineering streams
Civil engineering courses
Textile engineering courses
Along with the detailed exam pattern, the authorities will also release the detailed syllabus of Haryana LEET 2020. Candidates are advised to go through the syllabus and ensure that they do not miss out on any important topic to cover. Candidates can check the detailed syllabus in the table given below.
Haryana LEET 2020 Syllabus
(A) Basic Sciences
Mathematics- Arithmetic, Geometric and Harmonic Progressions, Binomial expansion, Matrices, Elementary operations, Rank of a matrix, Parabola, Ellipse and Hyperbola, Differentiation of a function, implicit function, parametric function. Successive differentiation. Maxima and Minima, Partial Differentiation, Definite and Indefinite Integration. First-order and first-degree ordinary differential equations.
Units and Dimensions with Dimensional analysis and their Limitations.
Motion in one and two dimensions and Newton's Laws of Motion.
Work and Energy and Conservation Laws of Energy
Properties of matter i.e. Elasticity, surface tension and viscosity in a fluid motion.
Waves and vibration, Characteristics of waves and simple Harmonic motion.
Rotational motion, Conservation of angular momentum.
Gravitation, Newton's law of gravitation, Kepler's law and Satellite.
Heat and temperature, measurement of temperature and mode of transfer of heat and their laws.
Geometric optics and simple optical instruments.
Simple laws of electrostatics and their use to find the E and Potential, Capacitors and dielectric constant.
Laser, its principle and use, superconductivity, Conventional and non-conventional energy sources.
Chemistry- Hard and soft water, types of hardness, disadvantages of the hardness of water, its causes and its remedies
Brief introduction of the term,
Definition of symbol, formula, valency & chemical equation.
Words, antonyms and synonyms, communication technique Grammatical ability
correction incorrect sentences
General awareness about Technical Education in Haryana
Name of Polytechnic, Number of Polytechnics and sanctioned intake
Eligibility for admission to LEET
Number of Institutions offering BE/B.Tech. & B.Pharmacy.
Name the Processes involved in on-line off-campus counselling.
General awareness about Haryana
Name of Ministers/Chief Minister/Governor
No. of Districts/Tehsils/Blocks/villages
The total population of State/Area of state/Boundary states of Haryana, History of Haryana
(B) Electronics Streams
Electrical Engineering- Electrical and Magnetic Circuits, EMF, Kirchhoff's laws and Faraday's Laws, Network theorems. AC Circuits, RMS value, the behaviour of RLC elements, series and parallel circuits, series and parallel resonance circuits. Transformers, Introductions to single-phase and three-phase transformers DC Machines, Theory, constructions and operation of DC generator and motor. Induction Motor, Principle, construction and operation of three-phase induction motors. Transmission and Distribution, Advantage of high voltage for transmission, comparison of 3 phase, single phase, 2 phase, and three-wire D.C. Systems.
Electronics Engineering- Measurements & Instrumentation, Errors, standards, accuracy precision resolution, Ammeters, voltmeters, wattmeters and energy meters, insulation tester, earth tester, multimeter, CRO, measurement of V, I & F on CRO low, medium & high resistance measurement, AC Bridges, Transducers for measurement of temperature, displacement, Communication System, Types of modulation, demodulation. Analog Electronics, Semiconductor diode circuits, Zener diode and Zener diode circuits, LED, Photodiode, BJT, FET & their configurations and characteristics, Biasing, small-signal & large signal amplifiers, OP AMPS, oscillators, regulated power supply. Digital Electronics, Number System, conversion from one to another system, Binary arithmetic, codes conversion & parity; Logic gates; Boolean algebra, Flip Flop. Industrial Electronics and Control, SCR, DIAC, TRIAC.
Computer Engineering- Fundamentals of Computers, Organization of Digital Computers, Data Processing, High-Level Languages, Translators, Compilers, Interpreters, algorithms, Flow Charting, Instructions, assembly language Programming. Computer Organization, Overview of registers, bus organized computers, instruction set, Instruction execution, Hard-wired and microprogrammed control units, Processor
Organization. Memory Organization: Cache and virtual memory, I/O organization. Operating Systems, Overview of Operating Systems, Basic functions, the concept of process, scheduling, memory management, critical section, synchronization, monitors.
Programming in C, Steps in Program development, flowcharting, algorithm, C Language: Data types, Console I/O program control statements, arrays, structures, unions functions, pointers, enumerated data types and type statement, File handling, C standard library and header files. Basic of Computer networking, LAN, WAN, Internet & Application.
(C) Mechanical Streams
Mechanical Engineering- Applied Mechanics, Friction, laws of friction, friction applications, the centroid of a plane area, simple machines, screw jack, wheel & axles, the system of pulleys,
projectile, work, power, energy. The strength of materials, Stress, Strain, Hooke's law, stress-strain diagram, temperature stresses, composite section, Relation between elastic constants, (E.C.G.) Resilience, Principal stresses, principal planes, B.M. & S.F. diagram for simply supported and cantilevers, beams, columns & struts. Thermodynamics, First law of thermodynamics, the second law of thermodynamics, zeroth law, steam properties, Diesel cycle, Otto cycle. Modes of Heat Transfer (Conduction, Convection, Radiation). Fluid Mechanics, Properties of fluid, Viscosity, Newtonian and Non-Newtonian fluids, Bernoulli's Theorem, Types of Fluid flows, Dimensionless numbers, Measurement of fluid flow by the pilot tube, Venturimeter, Darcy equation.
Production Engineering/Manufacturing Processes- Workshop Technology, Lathe- operations, turning machining Time, cutting speed, feed,depth of cut, Drilling, Type of drilling machines, Drilling operation, Drilling time, Milling, up milling, down milling, milling operations, milling cutters, milling time, Shaper & Planer Working Principle, Measuring Instruments and Gauges, Vernier Caliper, Micrometer, Sine Bar, Plug gauges, snap gauges, ring gauges welding, Soldering, Brazing.
Material Science, Engg. Materials, Mechanical properties of materials, hardness testing methods, heat treatment, hardening annealing, tempering, carburizing, Normalizing. Engineering Graphics & Drawing, First angle and third angle projection methods, orthographic views, Isometric views, conventions for lines and materials, Projections of lines and solids (only conceptual questions).
Foundry, Pattern and their types, moulds and moulding materials. Plastic & their properties, various moulding processes of plastic. Industrial management, types of organizational structure, qualities & responsibilities of a good leader, methods of quality control, productivity.
Power flow in an automobile
Gear box & its types,
use and types of breaks,
types of clutches,
basic knowledge of differential,
lubrication of Engine,
types of wheels and tyres used in Automobile, major automobile industries.
(D) Other Engineering Streams
Introduction to brick, raw materials for bricks, manufacturing of bricks, brickwork in the foundation.
Index properties of soil, seepage of soil.
Water demand for industrial/Commercial & domestic purposes, per capita
demand, various sources of water, Treatment & Disposal of sludge
Types of foundation (Design not included), Repair & Maintenance of Buildings, Basic principles of surveying chain surveying, Bench-Mark, compass surveying, Basics of RCC (elementary knowledge) different grades of concrete, workability, mixing of concrete, compaction of concrete.
Classification & suitability of various types of doors, roofs.
Name of earth moving machinery, different types of road material, flexible & rigid pavements, classification of bridges.
Water requirement of crops, methods of irrigations Concept/meaning/need/competencies/qualities of Entrepreneur classifications of dams & site selection for reservoir classifications of rocks.
various types of cement & their uses
The basis of Ecology, Pollution of water its causes & remedial near, Role of non-conventional sources of energy.
Textile Engineering- Different types of fibres, Fabrics & yarn manufacturing & performance, Weaving Technology Textile testing & quality control Modern methods in yarn products Bleaching, Dyeing & Printing.
Chemical/Printing Engineering- Elementary knowledge of Fluid Flow, Chemical process industry, Agro-based industries, Petrochemicals Introduction of printing machines/presses, types of printing.
Ceramic Engineering- Classification of various pottery productions, ceramic material & their properties.
Food Technology- Vitamins, cereals & Pulses milk & milk powder preservation of food process.
Agriculture Engineering- Introduction to Farm equipment
Architecture- History of Indian Architecture, building topologies.
Fashion Design & Fashion Technology- Knowledge of Fashion Technology, History & Culture, Introduction to garment manufacturing machines & tools.
Candidates will be able to download the admit card of LEET 2020 from the official website tentatively in the second week of May. Candidates will have to carry two copies of the admit card with photographs attested by a gazetted officer along with one valid Identity(ID) proof having his/her photograph on it to the allotted exam centre. The admit card will contain every necessary detail such as a candidate’s personal information, date, time & exam centre, and important guidelines.
The result of Haryana LEET 2020 will be declared by the examination authorities on the official website. The authorities will not send the result through post and will also not entertain any requests related to re-evaluation/ re-checking of answers of the Haryana LEET 2020.
The merit list of Haryana LEET 2020 will be prepared on the basis of total marks secured by the candidates in the entrance test. Candidates who will be a part of the merit list will be eligible for Haryana LEET 2020 counselling.
Many times, two or more candidates score the same marks in the Haryana LEET 2020, in that case, the merit list will be prepared according to the procedure mentioned below.
Candidate with higher marks in Mathematics will be placed higher.
If a tie persists, marks of Physics will be considered.
If a tie still persists, a candidate with higher marks in aggregate of engineering subjects in Haryana LEET 2020 will be placed higher.
If a tie still continues, a candidate who is older will be placed higher.
Finally, if a tie still persists, both the candidates will be given the same rank.
Candidates who will be able to obtain a rank in the merit list will be eligible to participate in the Haryana LEET 2020 counselling and seat allotment. The authorities will conduct three rounds of counselling and the first round will tentatively commence in the first week of July. Candidates will have to pay the counselling fee. It can be paid online using debit cards, credit cards, or net banking or can be paid offline by generating e-challan which has to be deposited at any designated computerized branches of Axis and PNB Bank.
First counselling: 1st phase of counselling will be conducted for candidates of all categories including RoHC, KM, HOGC, TFW, SC, BC-B, PH, BC-A, ESM and FF of all categories with 25% Female reservation.
Second & third counselling: 2nd phase of counselling will be conducted for candidates of all categories including RoHC (only till second counselling), KM, TFW, HOGC, SC, BC, all ESM and FF with 25% Female reservation.
NOTE: After the third counselling, HSTES will not conduct any counselling. The admission will be offered at Institute level counselling after merging the sub-categories into the main reserved category.
HARYANA STATE TECHNICAL EDUCATION SOCIETYUnder Department of Technical Education, Govt of HaryanaBays No. 7-12, Sector4,Panchkula
This article has been written as per last year's information. Updated details will be available here as soon as it is released by the authorities.
Haryana LEET Counselling 2020 will commence tentatively from the first week of July. Four rounds ...
Your Haryana LEET brochure has been successfully mailed to your registered email id .
The Question containing Inaapropriate or Abusive Words
Question lacks the basic details making it difficult to answer
Topic Tagged to the Question are not relevant to Question
Question drives traffic to external sites for promotional or commercial purposes
The Question is not relevant to User
Regular exam updates, QnA, Predictors, College Applications & E-books now on your Mobile