VIT Bhopal University | M.Tech Admissions 2026
M.Tech admissions open @ VIT Bhopal University | Highest CTC 70 LPA | Apply now
Search Colleges, Exams, Schools & more
Login
GATE 2026 Paper Analysis for ME by The GATE Academy - Check Here!
GATE 2026 Paper Analysis for ME by The GATE Academy - Students can check the GATE 2026 Paper Analysis for Mechanical Engineering by the GATE Academy on this page. The experts at The GATE Academy has carefully prepare the GATE ME analysis to help students understand the exam pattern, types of questions asked and the most repeated topics. The GATE paper analysis for Mechanical Engineering by GATE Academy covers a range of aspects, including the difficulty level of the GATE exam, the topics asked, the number of questions from each section, and more. In this article, we bring you a comprehensive analysis of the GATE 2026 ME paper by The GATE Academy.
Students can also refer to the previous year GATE Ppaer Analysis, official GATE result, answer key, GATE subject-wise weightage, and cutoff. Scroll down for detailed GATE 2026 Paper Analysis.
GATE 2026 Paper Analysis for ME by The GATE Academy
Students can check the GATE ECE paper analysis by GATE Academy below. This analysis is prepared by experts on the basis of GATE Question Paper and students' reactions:
- Based on GATE 2026 ME Analysis by GATE Academy the overall difficulty level of the GATE ME 2026 Paper was moderate.
- The General Aptitude section was easy and scored.
- The GATE ME 2026 Engineering Mathematics section was moderate.
- Some questions from topics like Fluid Mechanics and Engineering mechanics were lengthy and time consuming.
- GATE 2026 ME Paper was a mix of conceptual, analytical and mechanics based questions.
- In GATE ME 2026 Paper MCQs and NAT questions dominate while MSQ questions were absent.
- Based on GATE ME 2026 analysis by GATE Academy questions asked in exam requires multiple calculations.
- Questions were asked from Manufacturing Engineering, Thermodynamics, Fluid Mechanics, Theory of Machines, and Engineering Mathematics.
- Various numerical questions were asked from Fluid Mechanics and Theory of Machines.
GATE 2026 ME Topic-wise Weightage
Refer to the table given below for GATE ME 2026 topic-wise weightage. This table helps students to identify the most asked topics:
| Chapter | Count | Weightage |
| Casting, Forming and Joining Processes | 2 | 3.08% |
| Computer Integrated Manufacturing | 2 | 3.08% |
| Engineering Materials | 1 | 1.54% |
| Engineering Mathematics | 9 | 13.85% |
| Engineering Mechanics | 4 | 6.15% |
| Fluid Mechanics | 5 | 7.69% |
| General Aptitude | 10 | 15.38% |
| Heat Transfer | 5 | 7.69% |
| Inventory Control | 1 | 1.54% |
| Machine Design | 3 | 4.62% |
| Machining and Machine Tool Operations | 3 | 4.62% |
| Mechanics of Materials | 4 | 6.15% |
| Metrology and Inspection | 1 | 1.54% |
| Operations Research | 2 | 3.08% |
| Production Planning and Control | 2 | 3.08% |
| Theory of Machines | 3 | 4.62% |
| Thermodynamics | 4 | 6.15% |
| Thermodynamics - Applications | 2 | 3.08% |
| Vibrations | 2 | 3.08% |
| Grand Total | 65 | 100.00% |
GATE ME Previous years' analysis:
Refer to the year wise GATE ECE Analysis by GATE Academy. These analysis are prepared by experts on the basis of question papers and students reaction:
GATE 2024 Paper Analysis for ME
|
S.No |
Topics |
% wise weightage |
|
1 |
Engineering Mathematics |
12 to 13% |
|
2 |
General Aptitude |
15% |
|
3 |
Mechanics of Materials |
2 to 3% |
|
4 |
Engineering Mechanics |
2 to 3% |
|
5 |
Theory of Machines |
8 to 9% |
|
6 |
Machine Design |
2 to 3% |
|
7 |
Fluid Mechanics |
6 to 7% |
|
8 |
Heat Transfer |
5 to 6% |
|
9 |
Thermodynamics |
10 to 12% |
|
10 |
Manufacturing Engineering |
12 to 14% |
|
11 |
Industrial Engineering |
5 to 6% |
GATE 2023 Paper Analysis for ME
- As per the students based reactions the overall paper level was moderate.
- The total number of questions asked in exam was 65, where NAT questions were 25, MSQ were 8 and MCQ were 32.
- The questions asked from topics like thermodynamics (1 question), material science (4 questions), heat transfer, strength of material (4 questions), welding, theory of machine, EOQ (1 question), LPP (1 question)
GATE 2026 College Predictor
Estimate your M.Tech admission chances in top engineering colleges using your GATE 2026 score & marks with our accurate and easy-to-use College Predictor tool.
Try Now| Section | Questions | Total Marks | |
| 1 Mark questions | 2 Mark Questions | ||
| General Aptitude | 5 | 5 | 15 |
| Engineering Mathematics | 3 | 7 | 7 |
| Engineering Mechanics | 2 | 1 | 4 |
| Strength of Material | 2 | 3 | 8 |
| Theory of Machines | 1 | 2 | 5 |
| Machine Design | 4 | 2 | 8 |
| Thermodynamics | 1 | 4 | 9 |
| Fluid Mechanics | 2 | 4 | 10 |
| Heat & Mass Transfer | 2 | 2 | 6 |
| Production Engineering | 2 | 3 | 8 |
| Industrial Engineering | 1 | 1 | 3 |
UPES M.Tech Admissions 2026
Ranked #45 Among Universities in India by NIRF | 1950+ Students Placed 91% Placement, 800+ Recruiters
Jaypee University M.Tech Admissions 2026
Highest CTC 94.25 LPA | Average CTC 11.09 LPA Approved by UGC & AICTC | Accredited by NBA & NAAC A Grade | 98% Students Placed | 260+ Recruiters
GATE 2018 Paper Analysis for ME (Session 1)
|
Subject |
Number of Questions |
Topics Asked in Paper (Memory Based) |
Level of Questions |
Total Marks |
|
Engineering Mathematics |
1 Marks: 6 2 Marks: 4 |
Mean Value Theorem; Probability, Euler’s Method, Rank, Analytic Function, Laplace Transform |
Easy |
14 |
|
Engineering Mechanics |
1 Marks: 0 2 Marks: 2 |
Slider Crank Mechanism, Collision |
Medium |
4 |
|
Mechanics of Materials |
1 Marks: 4 2 Marks: 5 |
Simple Stress Strains, Analysis of Shear Stress, Stress in Beams, Plain Stress |
Medium |
14 |
|
Theory Of Machines |
1 Marks: 3 2 Marks: 2 |
Gear Strain |
Medium |
7 |
|
Machine Design |
1 Marks: 1 2 Marks: 2 |
Bearing Capacity, Breaks |
Easy |
5 |
|
Fluid Mechanics |
1 Marks: 3 2 Marks: 4 |
Peloton Wheels, |
Medium |
11 |
|
Heat Transfer |
1 Marks: 0 2 Marks: 1 |
Conduction, |
Easy |
2 |
|
Thermodynamics |
1 Marks: 2 2 Marks: 4 |
Entropy, IC Engines, Steady Flow Energy Equation |
Medium |
10 |
|
Manufacturing Engineering |
1 Marks: 6 2 Marks: 4 |
ECM, Sheet Metal, Metal cutting |
Tough |
14 |
|
Industrial Engineering |
1 Marks: 0 2 Marks: 2 |
Linear Program |
Medium |
4 |
|
General Aptitude |
1 Marks: 5 2 Marks: 5 |
Geometry, TSD, Functions, Grammar, Numbers, Work, inference |
Easy |
15 |
|
Total |
65 |
100 | ||
|
Faculty Feedback |
Majority of the question were concept based. General Aptitude And Mathematics is Very Easy. Core Subject Questions were 50% easy, 30% medium and 20% tough. | |||
Topic wise weightage
|
S.No |
Topics |
% wise weightage |
|
1 |
Engineering Mathematics |
14% |
|
2 |
General Aptitude |
15% |
|
3 |
Mechanics of Materials |
14% |
|
4 |
Engineering Mechanics |
4% |
|
5 |
Theory of Machines |
7% |
|
6 |
Machine Design |
5% |
|
7 |
Fluid Mechanics |
11% |
|
8 |
Heat Transfer |
2% |
|
9 |
Thermodynamics |
10% |
|
10 |
Manufacturing Engineering |
14% |
|
11 |
Industrial Engineering |
4% |
GATE 2018 Paper Analysis for ME (Session 2)
|
Subject |
Number of Question |
Topics Asked in Paper (Memory Based) |
Level of Questions |
Total Marks |
|
Engineering Mathematics |
1 Marks: 5 2 Marks: 4 |
Random Variable, Complex Variable, Divergence, Complementary Function, Determinant, Variable Separable Method, Fourier Series |
Easy |
13 |
|
Engineering Mechanics |
1 Marks:1 2 Marks: 1 |
Slider Crank Mechanism, Collision |
Medium |
3 |
|
Mechanics of Materials |
1 Marks: 2 2 Marks: 3 |
Columns, Simple Stress and Strain |
Medium |
8 |
|
Theory Of Machines |
1 Marks: 2 2 Marks: 3 |
Gear Strain, Vibration, Torsion, Cams |
Medium |
8 |
|
Machine Design |
1 Marks: 1 2 Marks: 2 |
Bearing Capacity, Breaks |
Easy |
3 |
|
Fluid Mechanics |
1 Marks: 2 2 Marks: 3 |
Fluid Properties, Flow through pipes |
Medium |
8 |
|
Heat Transfer |
1 Marks: 1 2 Marks: 2 |
Radiation, Convection |
Easy |
5 |
|
Thermodynamics |
1 Marks: 2 2 Marks: 5 |
Ideal Gas, IC Engine, Vapour compression cycle, Refrigeration |
Medium |
12 |
|
Manufacturing Engineering |
1 Marks: 7 2 Marks: 6 |
Milling, Metal Cutting, Forming, EDM |
Tough |
19 |
|
Industrial Engineering |
1 Marks: 2 2 Marks: 2 |
Inventory Management, Linear Programming |
Tough |
6 |
|
General Aptitude |
1 Marks: 5 2 Marks: 5 |
Geometry, TSD, Functions, Grammar, Numbers, Work, inference |
Easy |
15 |
|
Total |
65 |
|
|
100 |
|
Faculty Feedback |
Majority of the question were concept based. General Aptitude And Mathematics is Very Easy. Core Subject Questions were 50% easy, 30% medium and 20% tough. | |||
GATE 2017 Paper Analysis for ME (Session 1)
|
Subject Topics |
No. Of Questions |
Topics – Questions were asked from |
Difficulty Level |
Total Marks |
|
Strength of Materials (SOM) |
1 marks- 4 2 marks- 3 |
Poisson's Ratio, Columns, |
Easy |
10 |
|
Mechanical Precision Engineering |
1 marks -5 2 marks - 6 |
Slab Milling, non-traditional machining, Casting, Welding |
Easy to Moderate |
17 |
|
Theory of Machines (TOM) and Vibration |
1 marks- 1 2 marks- 3 |
Natural Frequency, Dynamics of Slider Crank Mechanism, Epicyclic Gear Trains |
Easy |
7 |
|
Thermo Dynamics & Applied Thermo Dynamics |
1 marks -1 2 marks- 4 |
Brayton Cycle, Entropy |
Moderate |
9 |
|
Heat & Mass Transfer |
1 marks - 1 2 marks - 2 |
Conduction, Heat Exchanger |
Easy to Moderate |
5 |
|
Fluid Mechanics |
1 marks - 4 2 marks - 3 |
Flow through Pipes, Kinematics |
Easy to Moderate |
10 |
|
Engineering Mechanics |
1 marks - 1 2 marks - 2 |
|
Tough |
5 |
|
General Aptitude |
1 marks - 5 2 marks - 5 |
Family Relations, Grammar, Inference, Co-ordinate Geometry |
Tough |
15 |
|
Machine Design |
1 marks - 2 2 marks - 1 |
S-N Curve, Theories of Failure |
Easy to Moderate |
4 |
|
Industrial Engineering |
1 marks - 0 2 marks - 2 |
Scheduling |
Moderate |
4 |
|
Engineering Mathematics |
1 marks - 5 2 marks - 2 |
Differential Equations, Probability, Rank of the Matrix, Eigen Values |
Moderate |
14 |
|
Total |
65 |
100 | ||
Topic wise Weightage
|
S.No |
Topics |
% wise weightage |
|
1 |
Manufacturing Engineering |
17% |
|
2 |
General Aptitude |
15% |
|
3 |
Maths |
14% |
|
4 |
Fluid Mechanics 10 |
10% |
|
5 |
Thermo Dynamics |
9% |
|
6 |
Theory of Machines |
7% |
|
7 |
Engineering Mathematics |
5% |
|
8 |
Heat Transfer5 |
5% |
|
9 |
Industrial Engineering |
4% |
|
10 |
Machine design |
4% |
GATE 2017 Paper Analysis for ME (Session 2)
|
Subject Topics |
No.Of Questions |
Topics in detail |
Difficulty Level |
Total Marks |
|
Engineering Mathematics |
1 marks - 4 2 marks - 4 |
Mode, Probability, |
Moderate |
12 |
|
Theory of Machines (TOM) and Vibration |
1 marks - 2 2 marks - 5 |
Vibrations, |
Easy |
12 |
|
Mechanical Precision Engineering |
1 marks -4 2 marks - 5 |
Material science, Forming, USM, Crystal structures, Metal cutting, Tool life, |
Easy to Moderate |
12 |
|
Thermo Dynamics & Applied Thermo Dynamics |
1 marks -2 2 marks - 4 |
Psychometry, |
Moderate |
10 |
|
Strength of Materials (SOM) |
1 marks - 5 2 marks - 3 |
Maximum shear stress, Fatigue loading, Thermal stresses, Bending moment |
Easy |
11 |
|
Fluid Mechanics |
1 marks - 4 2 marks - 3 |
Divergence, Stability of floating Body, Fluid kinetics, Turbines |
Easy to Moderate |
10 |
|
Industrial Engineering |
1 marks - 2 2 marks - 3 |
Queuing theory, Standard deviation |
Moderate |
8 |
|
Heat & Mass Transfer |
1 marks - 2 2 marks - 2 |
Radiation, Fins, Unsteady state heat conduction |
Easy to Moderate |
6 |
|
Machine Design |
1 marks - 0 2 marks - 2 |
|
Easy to Moderate |
4 |
|
Engineering Mechanics |
1 marks - 0 2 marks - 0 |
|
- |
0 |
|
General Aptitude |
1 marks - 5 2 marks - 5 |
Family Relations, Grammar, Inference, Co-ordinate Geometry |
Tough |
15 |
|
Total |
65 |
|
|
100 |
Topic-wise Weightage
|
S.No |
Topics |
% wise weightage |
|
1 |
Engineering Mathematics |
14% |
|
2 |
Theory of Machines & Vibrations |
14% |
|
3 |
Thermo Dynamics |
12% |
|
4 |
MPE |
14% |
|
5 |
Strength of Materials |
13% |
|
6 |
Fluid Mechanics |
12% |
|
7 |
Heat Transfer; |
7% |
|
8 |
Industrial Engineering |
9% |
GATE Cutoff for ME
Candidates can check the cutoff of GATE, which consist of the closing scores to be secured for M.Tech admissions. The cutoff allow the candidates to know the scores which will give them a higher chance of M.Tech/M,E. Admissions or PSU recruitment as per the GATE scores.
GATE Qualifying Cutoff Marks for ME (2026 - 2013)
|
S.No |
Category | 2026 | 2025 | 2024 | 2023 |
2018 |
2017 |
2016 |
2015 |
2014 |
2013 |
|
1 |
General | 25.2 | 35.8 | 28.6 |
28.4 |
34.7 |
32.87 |
29.6 |
32.73 |
28.86 |
25 |
|
2 |
OBC | 22.6 | 32.2 | 25.7 |
25.5 |
31.2 |
29 |
26.6 |
29.46 |
25.97 |
22.25 |
|
3 |
SC/ST/PH | 16.7 | 23.8 | 19 | 18.9 |
23.1 |
21 |
19.7 |
21.82 |
19.24 |
16.67 |
Frequently Asked Questions (FAQs)
Q: What was the overall difficulty level of the GATE 2026 Mechanical Engineering (ME) paper?
A:
The overall difficulty level of the GATE 2026 ME paper was moderate. Candidates with strong conceptual understanding and effective time management found the paper manageable.
Q: Which topics carried the highest weightage in the GATE 2026 ME paper?
A:
The most asked topics are Manufacturing Engineering, Thermodynamics, Fluid Mechanics, Theory of Machines, Strength of Materials, Heat Transfer, and Engineering Mathematics.
Q: Does General Aptitude and Engineering Mathematics scoring sections?
A:
Yes, both General Aptitude and Engineering Mathematics were easy to moderate and scoring.
Q: What types of questions were asked in the GATE 2026 ME paper?
A:
The paper included a combination of Multiple Choice Questions and Numerical Answer Type (NAT) question.
Articles
Related Stories
|
Upcoming Engineering Exams
Certifications By Top Providers
Explore Top Universities Across Globe
Popular Courses and Specializations
List of colleges accepting GATE
Browse Engineering Colleges by State
Questions related to GATE
On Question asked by student community
Have a question related to GATE ?
Hi!
Given below are thre links to access the PYQs to GATE:
https://engineering.careers360.com/articles/gate-mathematics-question-papers
https://engineering.careers360.com/articles/last-15-years-gate-papers-solutions
https://engineering.careers360.com/articles/gate-question-papers
Hello Ansh
Please check the link given below for UP GNM previous year question paper:
https://medicine.careers360.com/articles/up-gnm-question-papers
Hope it helps.
Hello Dear Student,
Congratulations on receiving an offer from K J Somaiya Institute of Technology !
Electronics and Computer Engineering (E&CE) is a multidisciplinary branch that combines concepts from electronics and computer science, making it highly relevant in today's technology landscape.
Why E&CE is a Good Choice
- Covers both electronics
Hello Dear Student,
With a GATE CSE score of 503 (OBC-NCL) , admission to M.Tech Computer Science & Engineering (CSE) at Malaviya National Institute of Technology Jaipur is likely to be difficult, as recent OBC cutoff trends for CSE have generally been higher than 500. Careers360's expected 2026 cutoff places
Hello Dear Student,
With a GATE score of 381, OBC-NCL rank of 776, and GATE marks of 42.67, admission to IIT Kharagpur for M.Tech is likely to be difficult for highly competitive branches. Recent IIT Kharagpur cutoffs for OBC candidates in popular programmes have generally been much higher than a
M.Tech/M.Arch Admissions OPEN
Amity University-Noida M.Tech Admissions 2026
ApplyAmong top 100 Universities Globally in the Times Higher Education (THE) Interdisciplinary Science Rankings 2026
Integral University M.Tech Admissions 2026
ApplyNAAC A+ Accredited | Highest CTC 45 LPA | Scholarships Available
NIELIT University(Govt. of India Institution) 2026
ApplyCampuses in Ropar, Agartala, Aizawl, Ajmer, Aurangabad, Calicut, Imphal, Itanagar, Kohima, Gorakhpur, Patna & Srinagar
GMRIT Deemed to be University M.Tech Admissions 2026
Apply100+ Recruiters | 100+ Placements of 2026 Batch | NBA & NAAC Accredited | Highest CTC 37 LPA
GITAM University Admissions 2026
ApplyApplication End Date: 10th Jul'26 | AICTE Approved | NAAC A++ | Category 1 University by MHRD | Highest CTC 1.4 Cr LPA from Amazon
GLA University Mathura M.Tech Admissions 2026
ApplyHighest CTC 60 LPA | 46000+ Alumni Network | 500+ Global Recruiters
GATE Notifications
Explore Career Options
By IndustryNever miss GATE update
Get timely GATE updates directly to your inbox. Stay informed!