Thank You!
Ebook PDF has been sent to your Email ID successfully
Get education, career guidance; live webinars; learning resources and more
Subscribe NowLatest Update for TS PGECET
TS PGECET 2021 result declared on September 6.
TS PGECET 2021 application form last date without a late fee extended till July 22.
Stay up-to date with TS PGECET News
Get UpdatesTS PGECET 2024 - JNTU Hyderabad commenced the TS PGECET registration 2024 on March 16. The authorities have updated the TS PGECET registration link on the official website, pgecet.tsche.ac.in. Candidates can fill the TS PGECET 2024 application form without a late fee by May 10, 2024. Moreover, the authorities have also announced the TS PGECET exam dates 2024. TS PGECET exam will be held from June 6 to 9. Candidates who have passed the qualifying exam with a minimum of 50% marks (45% for reserved category) can apply for the PGECET 2024 exam. Moreover, candidates who have valid scores in GATE can also apply for admission. Candidates can follow the TS PGECET syllabus and exam pattern to prepare for the exam.
Latest: TS PGECET Application Form 2024 Out - Apply Here
Recommended: Engineering Colleges accepting TS-PGECET
The registered candidates will be issued the TS PGECET 2024 hall ticket on May 28. Candidates have to provide the credentials to download the hall ticket of TS PGECET 2024. Carry the TS PGECET 2024 hall ticket and ID proof on the day of the examination.
The TS PGECET 2024 answer key will be released in online mode. The authorities will accept the objections against the answer key of TS PGECET 2024 till a specific period. Along with the answer keys, the authorities will also release the TS PGECET response sheet at the official website.
The Jawaharlal Nehru Technological University (JNTU), Hyderabad will declare the TS PGECET 2024 result at pgecet.tsche.ac.in. Candidates will be able to download TS PGECET results 2024 in online mode. Candidates will have to log in to the official website by using TS PGECET hall ticket number, registration number, and date of birth to check the result of TS PGECET 2024.
The authorities will announce the TS PGECET counselling dates 2024 on the official website. Candidates will have to complete the TS PGECET counselling registration 2024 in online mode. The last date for TS PGECET 2024 counselling registration will be announced. Candidates will be required to score a minimum of 30 marks in TS PGECET 2024 to participate in the counselling and seat allotment process. Candidates can also apply for admission based on their GATE scores. Candidates with GATE scores will be given preference.
The TS PGECET exam is conducted by Jawaharlal Nehru Technological University (JNTU), Hyderabad on behalf of Telangana State Council of Higher Education (TSCHE) for admissions into regular PG courses in Engineering , Technology, Architecture , and Pharmacy .
Also read - GRE
| Full Exam Name | Telangana State Post Graduate Engineering Common Entrance Test |
| Short Exam Name | TS PGECET |
| Conducting Body | Jawaharlal Nehru Technological University Hyderabad |
| Frequency of Conduct | Once a year |
| Exam Level | State Level Exam |
| Languages | English |
| Mode of Application | Online |
| Application Fee (General) | 1100 Rs [Online] |
| Mode of Exam | Online |
| Mode of Counselling | Online |
| Participating Colleges | 30 |
| Exam Duration | 2 Hours |
Upcoming Dates and Events
16 Mar, 2024 - 10 May, 2024
Application | Mode: Online Ongoing
11 May, 2024 - 14 May, 2024
Late Fee Application - With a late fee of Rs. 250/- | Mode: Online
14 May, 2024 - 16 May, 2024
Application Correction | Mode: Online
15 May, 2024 - 17 May, 2024
Late Fee Application - With a late fee of Rs. 1000/- | Mode: Online
18 May, 2024 - 21 May, 2024
Late Fee Application - With a late fee of Rs. 2500/- | Mode: Online
22 May, 2024 - 25 May, 2024
Late Fee Application - With a late fee of Rs. 5000/- | Mode: Online
28 May, 2024 - 09 Jun, 2024
Admit Card | Mode: Online
06 Jun, 2024 - 09 Jun, 2024
Exam | Mode: Online
Past Dates and Events
12 Mar, 2024
TS PGECET notification | Mode: Online
M.Tech/M.Arch Admissions OPEN
The authorities have released the TS PGECET 2024 eligibility criteria on the official website. Candidates aspiring to apply for the university exam have to check and meet the eligibility criteria of TS PGECET 2024 before filling in the online application form. The eligibility criteria of TS PGECET 2024 is mentioned below:
Only Indian nationals can apply for TS PGECET 2024.
Candidates shall belong to either Andhra Pradesh or Telangana State
All the candidates must present the local or non-local residents as per the requirements of the admission
Candidates should have scored at least 50% marks in the qualifying exam for the general categories while for the reserved categories at least 45% marks should have been scored.
GATE-qualified candidates are also eligible to apply for the admission
Candidates in their final year of graduation are also eligible to apply for the Telangana Post Graduate Engineering Common Entrance Test.
Mode of Application : Online
Mode of Payment : Credit Card | Debit Card | Other
The TS PGECET 2024 application form was released on the official website on March 16. The last date to complete the TS PGECET registration 2024 without a late fee is May 10. Candidates first have to pay the application fee through the debit/credit card or at the AP/TS centres and then fill in their personal and academic details to complete registration. Any application form with incomplete details will be rejected. After candidates successfully fill the TS PGECET application form 2024, their registration ID for the exam will be generated. The steps to complete the TS PGECET application form are provided below.
The aspiring candidates are advised to go through the following stepwise procedure to fill in the application form:
STEP 1- Payment of Fees:
Candidates applying for TS PGECET 2024 will first be required to pay the examination fee. The University accepts the payment of the application form of TS PGECET 2024 through two modes- AP/TS Centres or Credit/Debit Card.
STEP 2-Registration:
Candidates will have to complete the initial registration as a part of the application form of TS PGECET 2024. In order to register, candidates will be required to fill in the details such as Payment reference ID, Qualifying Examination Hall ticket number, mobile number, and date of birth.
STEP 3- Login:
Candidates whose registration process is complete should log into the admission portal to fill in the application form.
STEP 4- Filling the Application Form:
Candidates should fill all the required details in the application form such as Name, Gender, Parent’s name, exam centre, Aadhaar card number, category and application number of Caste certificate, Special category, income certificate, minority status, etc. Then the academic details, contact details, preferred exam centre, and subject stream have to be entered accordingly.
STEP 5- Document Upload:
Candidates will be required to upload the documents to complete the application form. They will be required to upload their recent photograph (of less than 50 kb in JPEG/JPG format) and signature (of less than 30 kb in JPEG/JPG format). Documents if not uploaded in the correct order, the candidate’s application form for TS PGECET 2024 might get rejected.
STEP 6- Submission of the Application Form:
Once all the details are entered, candidates will have to review their TS PGECET 2024 application form. The registration ID will be displayed which the candidates should make a note of for future purposes. Thereafter, candidates will have to click on the “confirm” button to submit their application form.
| Category | Quota | Mode | Gender | Amount |
|---|---|---|---|---|
| General, OBC, EWS | Online | Female, Male | ₹ 1100 | |
| ST, SC | Online | Female, Male | ₹ 600 | |
| General, OBC, EWS | PWD | Online | Female, Male | ₹ 600 |
Linear algebra |
|---|
| Vector algebra, matrix algebra, systems of linear equations, Eigenvalues and Eigenvectors, rank of a matrix |
Calculus |
|---|
| Functions of single variable, limit, continuity, and differentiability, mean value theorems, chain rule, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl, vector identities, directional derivatives, line |
| Surface and volume integrals |
| Stokes, Gauss, and Green’s theorem |
Differential calculus |
|---|
| First order linear and nonlinear equations; higher order linear odes with constant coefficients, Laplace transforms |
| Partial differential equations and separation of variables methods |
Numerical methods |
|---|
| Numerical solution of linear and nonlinear algebraic equations, integration by trapezoidal and Simpson rule, single and multi-step methods for differential equations |
Atmosphere |
|---|
| Properties, standard atmosphere |
| Classification of aircraft |
| Airplane (fixed wing aircraft) configuration and various parts |
Airplane performance |
|---|
| Pressure altitude; equivalent, calibrated, indicated air speeds; primary flight instruments: Altimeter, ASI, VSI, turn-bank indicator |
| Drag polar; take-off and landing; steady climb and descent, absolute and service ceiling; cruise, cruise climb, endurance or loiter; load factor, turning flight, V-N diagram; winds: Head, tail, and cross winds |
Static stability |
|---|
| Angle of attack, sideslip; roll, pitch, and yaw controls; longitudinal stick fixed and free stability, horizontal tail position and size; directional stability, vertical tail position and size; dihedral stability |
| Wing dihedral, sweep, and position; hinge moments, stick forces |
Dynamic stability |
|---|
| Euler angles; equations of motion; aerodynamic forces and moments, stability, and control derivatives; decoupling of longitudinal and lateral directional dynamics and modes |
Space dynamics |
|---|
| Central force motion, determination of trajectory and orbital period in simple cases |
| Orbit transfer, in-plane, and out-of-plane |
Basic fluid mechanics |
|---|
| Incompressible flows irrotational flow, viscous flows, boundary layer on a flat plate, Reynold’s number conservation of mass, momentum and energy, potential flow theory, sources, sinks, doubles, line vertex and their superposition, viscosity |
Airfoils and wings |
|---|
| Classification of airfoils, aerodynamic characteristics, high lift devices, Kutta–Joukowski theorem; lift generation; thin airfoil theory; finite wing theory; induced drag; Prandtl lifting line theory, critical and drag, divergence mach number |
Compressible flows |
|---|
| Basic concepts of compressibility, conservation equations; one dimensional compressible flows, isentropic flows, Fanno flow, Rayleigh flow; normal and oblique shocks, Prandtl-Meyer flow; flow through nozzles and diffusers |
| Elementary ideas of viscous flows including boundary layers; wind tunnel testing: Measurement and visualization techniques |
Strength of materials |
|---|
| States of stress and strain |
| Stress and strain transformation |
| Mohr's circle |
| Principal stresses |
| Three-dimensional Hooke's law |
| Plane stress and plane strain; failure theories: Rankine, Tresca and von Mises; strain energy |
| Castigliano's principles |
| Analysis of statically determinate and indeterminate trusses and beams |
| Elastic flexural buckling of columns |
Flight vehicle structures |
|---|
| Characteristics of aircraft structures and materials |
| Torsion, bending, and flexural shear of thin-walled sections |
| Loads on aircraft |
Structural dynamics |
|---|
| Free and forced vibrations of undamped and damped SDOF systems |
| Free vibrations of undamped 2-DOF systems |
| Vibration of beams |
| Theory of elasticity: Equilibrium and compatibility equations, Airy’s stress function |
Basics |
|---|
| Thermodynamics, boundary layers and heat transfer and combustion thermochemistry |
Thermodynamics of aircraft engines |
|---|
| Thrust, efficiency and engine performance of turbojet, turboprop, turbo shaft, turbofan and ramjet engines, thrust augmentation of turbojets and turbofan engines |
| Aerothermodynamics of non-rotating propulsion components such as intakes, combustor and nozzle |
Axial compressors |
|---|
| Angular momentum, work and compression, characteristic performance of a single stage axial compressor, stage efficiency of the compressor and degree of reaction |
Axial turbines |
|---|
| Turbine, stage efficiency annual flow turbine |
Centrifugal compressor |
|---|
| Centrifugal compressor stage dynamics, inducer, impeller, and diffuser |
Rocket propulsion |
|---|
| Elements of rocket motor performance, thrust equation and specific impulse, vehicle acceleration, drag, gravity losses, multi-staging of rockets |
| Classification of chemical rockets, performance of solid and liquid propellant rockets |
City planning |
|---|
| Evolution of cities; principles of city planning; types of cities and new towns; planning regulations and building bye laws; climate change and eco-city concept and other emerging concepts such as urban agriculture TOD, smart city, etc |
| Sustainable development, disaster resilient urban planning, inclusive planning |
Housing |
|---|
| Concept of housing; neighborhood concept; site planning principles; housing typology; housing standards; housing infrastructure; housing policies, finance and management; housing programs in India; affordable housing and self help housing |
| Eco-friendly housing, age-friendly housing |
Landscape design |
|---|
| Principles of landscape design and site planning; history of landscape styles; landscape elements and materials; plant characteristics and planting design; environmental considerations in landscape planning |
Computer aided design |
|---|
| Application of computers in architecture and planning; understanding elements of hardware and software; computer graphics; programming languages C and visual basic and usage of packages such as autoCAD, 3D-studio, 3D max |
Environmental studies in building science |
|---|
| Components of ecosystem; ecological principles concerning environment; climate responsive design; energy efficient building design, green building concepts and ratings; thermal comfort; solar architecture |
| Principles of lighting and styles for illumination; basic principles of architectural acoustics; environment pollution, their control and abatement |
Visual and urban design |
|---|
| Principles of visual composition; proportion, scale, rhythm, symmetry, harmony, datum, balance, form, color, texture; sense of place and space, division of space; barrier free design; theories and concepts of urban design, focal point, vista |
| Image ability, visual survey, figure-background relationship |
History of architecture |
|---|
| Indian indus valley, Vedic, Buddhist, Indo-Aryan, Dravidian and Mughal periods; European Egyptian, Greek, Roman, Medieval, and Renaissance periods-construction and architectural styles; vernacular and traditional architecture |
Development of contemporary architecture |
|---|
| Architectural developments and impacts on society since industrial revolution; influence of modern art on architecture; works of national and international architects; Art Nouveau, eclecticism, international styles, postmodernism |
| Deconstruction in architecture |
Building services |
|---|
| Water supply, sewerage and drainage systems; sanitary fittings and fixtures; plumbing systems, principles of internal and external drainage systems, principles of electrification of buildings, intelligent buildings; elevators and escalators |
| Their standards and uses; air conditioning systems; fire fighting systems, building safety, and security systems |
Building construction and management |
|---|
| Building construction techniques, methods and details; building systems and prefabrication of building elements; principles of modular coordination; estimation, specification, valuation, professional practice |
| Project management techniques EG, PERT, CPM, etc |
Materials and structural systems |
|---|
| Behavioral characteristics of all types of building materials E.G. mud, timber, bamboo, brick, concrete, steel, glass, FRP, different polymers, composites; principles of strength of materials; design of structural elements in wood, steel and RCC |
| Elastic and limit state design; complex structural systems; principles of prestressing; tall buildings; principles of disaster resistant structures |
Planning theory |
|---|
| Regional planning; settlement system planning; history of human settlements; growth of cities and metropolises; principles of ekistics; rural-urban migration; urban conservation; urban renewal; five year plan; structural and sectoral plan, master plan |
| Zonal plan and local area plan, planning in rural areas |
Techniques of planning |
|---|
| Planning survey techniques; preparation of urban and regional structure plans, development plans, action plans; site planning principles and design; statistical methods of data analysis |
| Application of GIS high resolution satellite data processing and remote sensing techniques in urban and regional planning; decision making models |
Traffic and transportation planning |
|---|
| Principles of traffic engineering and transportation planning; traffic survey methods; design of roads, intersections, grade separators and parking areas; hierarchy of roads and levels of services; traffic and transport management in urban areas |
| Intelligent transportation system; mass transportation planning; para-transits and other modes of transportation, pedestrian and slow moving traffic planning |
Infrastructure, services, and amenities |
|---|
| Principles of water supply and sanitation systems; water treatment; solid waste disposal systems; waste treatment, recycle and reuse; urban rainwater harvesting; power supply and communication systems-network, design and guidelines |
| Demography related standards at various levels of the settlements for health, education, recreation, religious and public-semi public facilities |
Development administration, and management |
|---|
| Planning laws; development control and zoning regulations; URDPFI guidelines, laws relating to land acquisition; development enforcements, urban land ceiling; land management techniques; planning and municipal administration |
| Disaster mitigation management; 73rd and 74th constitutional amendments; valuation and taxation; revenue resources and fiscal management; public participation and role of NGO and CBO; institutional networking and capacity building |
| UN-habitat norms, urban and regional governance, participatory approach in planning |
Linear algebra |
|---|
| Matrix algebra, systems of linear equations, Eigenvalues, and Eigenvectors |
| Calculus: Mean value theorems, theorems of integral calculus, partial derivatives, maxima and minima, multiple integrals, Fourier series, vector identities, line, surface and volume integrals, Stokes, Gauss, and Green’s theorems |
Differential equations |
|---|
| First order equation (linear and nonlinear), higher order linear differential equations with constant coefficients, method of variation of parameters, Cauchy’s and Euler’s equations, initial and boundary value problems |
| Solution of partial differential equations: variable separable method |
Analysis of complex variables |
|---|
| Analytic functions, Cauchy’s integral theorem and integral formula, Taylor’s and Laurent’s series, residue theorem, solution of integrals |
Probability and Statistics |
|---|
| Sampling theorems, conditional probability, mean, median, mode, and standard deviation, random variables, discrete and continuous distributions: Normal, Poisson, and binomial distributions |
| Tests of Significance, statistical power analysis, and sample size estimation |
| Regression and correlation analysis |
Numerical methods |
|---|
| Matrix inversion, solutions of nonlinear algebraic equations, iterative methods for solving differential equations, numerical integration |
Voltage and current sources |
|---|
| Independent, dependent, ideal, and practical; V-I relationships of resistor, inductor, mutual inductor and capacitor; transient analysis of RLC circuits with DC excitation |
| Kirchoff’s laws; mesh, and nodal analysis; superposition, Thevenin, Norton, maximum power transfer, and reciprocity theorems |
| Peak, average, and RMS values of AC quantities; apparent, active, and reactive powers; phasor analysis, impedance and admittance; series and parallel resonance, realization of basic filters with R, L, and C elements |
Continuous and discrete signal and systems |
|---|
| Periodic, aperiodic and impulse signals; sampling theorem; Laplace, Fourier and Z-transforms; transfer function, frequency response of first and second order linear time invariant systems, impulse response of systems; convolution, correlation |
| Discrete time system: Impulse response, frequency response, DFT; basics of IIR and FIR filters |
Characteristics and applications of diode |
|---|
| Zener diode, BJT, and MOSFET; small signal analysis of transistor circuits, feedback amplifiers |
| Characteristics of operational amplifiers; applications of op amps: difference amplifier, adder, subtractor, integrator, differentiator, instrumentation amplifier, buffer |
Number systems |
|---|
| Logic gates, Boolean algebra, combinational logic circuits, arithmetic circuits, comparators, Schmitt trigger, multi-vibrators, sequential circuits, flip flops, shift registers, timers and counters; sample-and-hold circuit, multiplexer |
| Principles and characteristics of ADC and DAC (resolution, quantization, significant bits, conversion/ settling time); microprocessor and microcontroller: Applications, memory and input-output interfacing; elements of data acquisition systems |
PMMC, MI and dynamometer type instruments |
|---|
| DC potentiometer; bridges for measurement of R, L and C, Q-meter |
| Basics of control engineering-modeling system: Transfer function |
Resistive, capacitive, inductive, piezoelectric |
|---|
| Hall effect electrochemical and optical sensors and their associated signal conditioning circuits; optical sources and detectors: LED, photodiode, light dependent resistor and their characteristics; physiological signals and their characteristics |
| Biopotential amplifiers, generation, acquisition, and signal conditioning of biosignals: ECG, EMG, EEG, EOG, ERG, PCG, GSR |
| Noise and artifacts and their management, electrical isolation (optical and electrical) and patient safety systems |
| Principles of measuring blood pressure |
| Operating principles of medical equipment-cardiac pacemaker, defibrillator, pulse oximeter, hemodialyzer, oxygenator, spirometer |
QRS detection methods |
|---|
| ECG data compression algorithms, detection of resting rhythms |
Hard tissues |
|---|
| Structure, functions, composition, and mechanical properties of cortical and cancellous bones |
Soft tissues |
|---|
| Structure, functions, composition, and mechanical properties of soft tissues: Cartilage, tendon, ligament, muscle |
Viscoelasticity |
|---|
| Features and models |
Human joints and movements |
|---|
| Skeletal joints, types of joints, forces and stresses in human joints, free body diagrams and equilibrium, biomechanical of analysis joints, Gait parameters and their analysis |
Biofluid mechanics |
|---|
| Flow properties of blood, blood flow in arteries, veins and micro vessels |
Basic physics, instrumentation and image formation techniques in medical imaging modalities |
|---|
| X-ray, CT, ultrasound, MRI, PET |
Basic properties of biomaterials |
|---|
| Types of biomaterials-metals, ceramics, polymers, and composites |
| Characteristics of implants-biocompatibility, bioactivity, biodegradability |
| Biomaterial characterization techniques-atomic force microscopy, electron microscopy, transmission electron microscopy, infrared spectroscopy |
Linear algebra |
|---|
| Matrices and determinants |
| Systems of linear equations |
| Eigen values and Eigen vectors |
Calculus |
|---|
| Limit |
| Continuity and differentiability |
| Partial derivatives |
| Maxima and minima |
| Sequences and series |
| Test for convergence |
| Fourier series |
Differential equations |
|---|
| Linear and nonlinear first order ODEs |
| Higher order ODEs with constant coefficients |
| Cauchy's and Euler's equations |
| Laplace transforms |
| PDE Laplace |
| Heat and wave equations |
Probability and Statistics |
|---|
| Probability and Sampling Theorem |
| Conditional probability |
| Mean |
| Median |
| Mean, median, mode & standard deviation |
| Random variables |
| Poisson, normal & binomial distributions |
| Normal and binomial distributions |
| Correlation and regression analysis |
Numerical methods |
|---|
| Solution of linear and nonlinear algebraic equations |
| Integration of trapezoidal and Simpson's rule |
| Single and multistep methods for differential equations |
Microbiology |
|---|
| Prokaryotic and eukaryotic cell structure |
| Microbial nutrition |
| Growth and control |
| Microbial metabolism aerobic and anaerobic respiration, photosynthesis |
| Nitrogen fixation |
| Chemical basis of mutations and mutagens |
| Microbial genetics plasmids, transformation, transduction, conjugation |
| Microbial diversity and characteristic features viruses |
Biochemistry |
|---|
| Biomolecules and their conformation |
| Weak inter-molecular interactions and biomacromolecules |
| Chemical and functional nature of enzymes |
| Kinetics of single substrate and bi-substrate enzyme catalyzed reactions bioenergetics |
| Metabolism glycolysis, tca and oxidative phosphorylation |
| Membrane transport and pumps |
| Cell cycle and cell growth control |
| Cell signalling and signal transduction |
Molecular biology and genetics |
|---|
| Molecular structure of genes and chromosomes |
| DNA replication and control |
| Transcription and its control |
| Translational processes |
| Regulatory controls and prokaryotes and eukaryotes |
| Mendelian inheritance |
| Gene interaction |
| Complementation |
| Linkage |
| Recombination and chromosome mapping |
| Extra chromosomal inheritance |
| Chromosomal variation |
| Population genetics |
| Transposable elements |
| Molecular basis of genetic diseases and applications |
Process biotechnology |
|---|
| Bioprocess technology for the production of cell biomass and primary/secondary metabolites |
| Such as baker’s yeast, ethanol, citric acid, amino acids, exopolysacharides, antibiotics and pigments etc |
| Microbial production |
| Purification and bioprocess application (s) of industrial enzymes |
| Production and purification of recombinant proteins on a large scale |
| Chromatographic and membrane based bioseparation methods |
| Immobilization of enzymes and cells and their application for bioconversion processes |
| Aerobic and anaerobic biological processes for stabilization of solid / liquid wastes bioremediation |
Bioprocess engineering |
|---|
| Kinetics of microbial growth |
| Substrate utilisation and product formation |
| Simple structured models |
| Sterilization of air and media |
| Batch |
| Fed batch and continuous processes |
| Aeration and agitation |
| Mass transfer and bioreactors |
| Rheology of fermentation fluids |
| Scale up concepts |
| Design of fermentation media |
| Various types of microbial and enzyme reactors |
| Instrumentation and bioreactors |
Plant and animal biotechnology |
|---|
| Special features and organization of plant cells |
| Totipotency |
| Regeneration of plants |
| Plant products of industrial importance |
| Biochemistry of major metabolic pathways and products |
| Autotrophic and heterotrophic growth |
| Plant growth regulators and elicitors |
| Cell suspension culture development |
| Methodology |
| kinetics of growth and production formation |
| Nutrient optimization |
| Production of secondary metabolites by plant suspension cultures |
| Hairy root cultures and their cultivation |
| Techniques and raising transgencies |
Characteristics of animal cells |
|---|
| Metabolism |
| Regulation and nutritional requirements for mass cultivation of animal cell cultures |
| Kinetics of cell growth and product formation and effect of shear force |
| Product and substrate transport |
| Micro and macro carrier culture |
| Hybridoma technology |
| Live stock improvement |
| Cloning and animals |
| Genetic engineering and animal cell culture |
| Animal cell preservation |
Immunology |
|---|
| The origin of immunology |
| Inherent immunity |
| Humoral and cell mediated immunity |
| Primary and secondary lymphoid organ |
| Antigen b and t cells and macrophages |
| Major histocompatibility complex mhc |
| Antigen processing and presentation |
| Synthesis of antibody and secretion |
| Molecular basis of antibody diversity |
| Polyclonal and monoclonal antibody |
| Complement |
| Antigen antibody reaction |
| Regulation of immune response |
| Immune tolerance |
| Hyper sensitivity |
| Autoimmunity |
| Graft versus host reaction |
Recombinant DNA technology |
|---|
| Restriction and modification enzymes |
| Vectors |
| Plasmid |
| Bacteriophage andother viral vectors |
| Cosmids |
| Ti plasmid |
| Yeast artificial chromosome |
| CDNA and genomic DNA library |
| Gene isolation |
| Gene cloning |
| Expression of cloned gene |
| Transposons and gene targeting |
| DNA labelling |
| DNA Sequencing |
| Polymerase chain reactions |
| DNA fingerprinting |
| Southern and northern blotting |
| Situ hybridization |
| RAPD |
| RFLP |
| Sitedirected mutagenesis |
| Gene transfer technologies |
| Gene therapy |
Bioinformatics |
|---|
| Major bioinformatics resources ncbi, ebi, expasy |
| Sequence and structure databases |
| Sequence analysis bimolecular sequence file formats, scoring matrices, sequence alignment, phylogeny |
| Genomics and proteomics large scale genome sequencing strategies comparative genomics understanding dna micro arrays and protein arrays |
| Molecular modeling and simulations basic concepts including concept of force fields |
Linear algebra |
|---|
| Matrices and determinants, systems of linear equations, Eigenvalues and Eigenvectors |
Calculus |
|---|
| Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl, vector densities |
| Directional derivatives, line, surface and volume integrals, Stokes, Gauss, and Green's theorems |
Differential equations |
|---|
| First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy's and Euler's equations, initial and boundary value problems, Laplace transforms |
| Solutions of one dimensional heat and wave equations and Laplace equation |
Complex variables |
|---|
| Analytic functions, Cauchy's integral theorem, Taylor and Laurent series, residue theorem |
Probability and Statistics |
|---|
| Definitions of probability and sampling theorems, conditional probability, probability density function, mean, median, mode and standard deviation, random variables, exponential, Poisson, normal, and binomial distributions |
Numerical methods |
|---|
| Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson's rule, single and multi-step methods for differential equations |
Process calculations and thermodynamics |
|---|
| Steady state mass and energy balances for reacting and non-reacting systems; use of tie components; recycle, bypass and purge calculations; degree of freedom analysis |
| First and second laws of thermodynamics |
| First law application to close and open systems |
| Second law and entropy thermodynamic properties of pure substances: Equation of state and departure function, properties of mixtures: Partial molar properties, fugacity, excess properties and activity coefficients |
| Phase equilibria: Predicting VLE of systems; chemical reaction equilibria |
Fluid mechanics and mechanical unit operations |
|---|
| Fluid statics, Newtonian and non-Newtonian fluids, Bernoulli equation, macroscopic friction factors, energy balance, dimensional analysis, shell balances, flow through pipeline systems, flow meters, pumps and compressors, packed and fluidized beds |
| Elementary boundary layer theory, particle size and shape, particle distribution, size reduction and size separation; free and hindered settling; centrifuge and cyclones; thickening and classification, filtration, mixing and agitation; conveying of solids |
Heat transfer |
|---|
| Conduction, convection and radiation, heat transfer coefficients, steady and unsteady heat conduction, boiling, condensation and evaporation; types of heat exchangers and evaporators and their design |
Mass transfer |
|---|
| Fick's law, molecular diffusion in fluids, mass transfer coefficients, two film, penetration and surface renewal theories; momentum, heat and mass transfer analogies; stage wise and continuous contacting operations and stage efficiencies |
| HTU and NTU concepts design and operation of equipment for distillation, absorption, leaching, liquid-liquid extraction, drying, humidification, dehumidification and adsorption, membrane separation: Microfiltration, ultrafiltration |
| Membrane separation: Nanofiltration and reverse osmosis |
Chemical reaction engineering |
|---|
| Theories of reaction rates; kinetics of homogeneous reactions, interpretation of kinetic data, single and multiple reactions in ideal reactors, non-ideal reactors; residence time distribution, single parameter model; non-isothermal reactors |
| Kinetics of heterogeneous catalytic reactions; diffusion effects in catalysis, rate and performance equation for catalyst deactivation |
Instrumentation and process control |
|---|
| Measurement of process variables; sensors, transducers and their dynamics, transfer functions and dynamic responses of simple systems, process reaction curve, controller modes (P, PI, and PID); control valves |
| Analysis of closed loop systems including stability, frequency response and controller tuning, cascade, feed forward control |
Plant design and economics |
|---|
| Principles of process economics and cost estimation including depreciation and total annualized cost, cost indices, rate of return, payback period, discounted cash flow |
| Optimization in process design and sizing of chemical engineering equipment such as heat exchangers and multistage contactors |
Chemical technology |
|---|
| Inorganic chemical industries; sulfuric acid, phosphoric acid, chlor-alkali industry NaOH, fertilizers (ammonia, urea, SSP, and TSP); natural products industries (pulp and paper, sugar, oil, and fats); petroleum refining and petrochemicals |
| Polymerization industries; polyethylene, polypropylene, PVC and polyester synthetic fibers |
Linear algebra |
|---|
| Matrices and determinants, systems of linear equations, Eigenvalues and Eigenvectors |
Calculus |
|---|
| Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl, vector identities |
| Directional derivatives, line, surface and volume integrals, Stokes, Gauss, and Green's theorems |
Differential equations |
|---|
| First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy's and Euler's equations, initial and boundary value problems, Laplace transforms |
| Solutions of one dimensional heat and wave equations and Laplace equation |
Complex variables |
|---|
| Analytic functions, Cauchy's integral theorem, Taylor, and Laurent series |
Probability and Statistics |
|---|
| Definitions of probability and sampling theorems, conditional probability, probability density function, mean, median, mode and standard deviation, random variables, exponential, Poisson, normal, and binomial distributions |
Numerical methods |
|---|
| Numerical solutions of linear and non-linear algebraic equations integration by trapezoidal and Simpson's rule, single and multi-step methods for differential equations |
Engineering mechanics |
|---|
| System of forces, free-body diagrams, equilibrium equations; internal forces in structures; friction and its applications; kinematics of point mass and rigid body; centre of mass; Euler’s equations of motion; impulse-momentum; energy methods |
| Principle of virtual work |
Solid mechanics |
|---|
| Bending moment and shear force in statically determinate beams |
| Simple stress and strain relationship: Stress and strain in two dimensions, principal stresses, stress transformation, Mohr's circle |
| Simple bending theory, flexural and shear stresses, unsymmetrical bending, shear centre |
| Thin walled pressure vessels, uniform torsion, buckling of column, combined and direct bending stresses |
Structural analysis |
|---|
| Analysis of statically determinate trusses, arches, beams, cables and frames, displacements in statically determinate structures and analysis of statically indeterminate structures by force/ energy methods |
| Analysis by displacement methods (slope deflection and moment distribution methods), influence lines for determinate and indeterminate structures |
Construction materials and management |
|---|
| Construction materials: Structural steel-composition, material properties and behaviour; concrete-constituents, short-term and long-term properties; bricks and mortar; timber; bitumen |
| Construction management: Types of construction projects; tendering and construction contracts; rate analysis and standard specifications; cost estimation; project planning and network analysis-PERT and CPM |
Concrete structures |
|---|
| Concrete technology-properties of concrete, basics of mix concrete design, working stress and limit state design concepts, analysis of ultimate load capacity and design of members subjected to flexure, shear, compression and torsion by limit state methods |
| Basic elements of prestressed concrete, analysis of beam sections at transfer and service loads |
| Losses of prestressed |
| Deflection of prestressed concrete simple beams |
Steel structures |
|---|
| Analysis and design of tension and compression members, beams, beam- columns, column bases |
| Connections-simple and eccentric, beam-column connections, plate girders, and trusses |
Soil mechanics |
|---|
| Origin of soils, soil classification, three-phase system, fundamental definitions, relationship and interrelationships, permeability and seepage, effective stress principle, consolidation, compaction, shear strength |
| One-dimensional consolidation; shear strength; Mohr’s circle, stress-strain characteristics of clays and sand |
Foundation engineering |
|---|
| Subsurface investigations-scope, drilling bore holes, sampling, penetration tests, plate load test |
| Earth pressure theories, effect of water table, layered soils |
| Stability of slopes-infinite slopes, finite slopes |
| Foundation types-foundation design requirements |
| Shallow foundations-bearing capacity, effect of shape, water table and other factors, stress distribution, settlement analysis in sands and clays |
| Deep foundations, pile types, dynamic and static formulae, load capacity of piles in sands and clays, negative skin friction |
Fluid mechanics and hydraulics |
|---|
| Properties of fluids, principle of conservation of mass, momentum, energy and corresponding equations, potential flow, applications of momentum and Bernoulli’s equation, laminar and turbulent flow, flow in pipes, pipe networks |
| Concept of boundary layer and its growth |
| Uniform flow, critical flow and gradually varied flow in channels, specific energy concept, hydraulic jump |
| Forces on immersed bodies, flow measurements in channels, tanks and pipes |
| Dimensional analysis and hydraulic similitude |
| Kinematics of flow, velocity triangles, and specific speed of pumps and turbines |
Hydrology |
|---|
| Hydrologic cycle, rainfall, evaporation, watershed concepts, infiltration, stage discharge relationships, unit hydrographs, flood estimation, reservoir capacity, reservoir and channel routing |
| Well hydraulics |
Irrigation |
|---|
| Duty, delta, estimation of evapotranspiration |
| Crop water requirements |
| Design of: Lined and unlined canals, waterways, head works, gravity dams and spillways |
| Design of weirs on permeable foundation |
| Types of irrigation system, irrigation methods |
| Water logging and drainage |
Water and wastewater engineering |
|---|
| Quality standards, basic unit processes and operations for water treatment |
| Drinking water standards, water requirements, basic unit operations and unit processes for water treatment, distribution of water |
| Sewage and sewerage treatment, quantity and characteristics of wastewater |
| Primary, secondary, and tertiary treatment of wastewater, sludge disposal, effluent discharge standards |
| Domestic wastewater treatment, quantity of characteristics of domestic wastewater, primary and secondary treatment unit operations and unit processes of domestic wastewater, sludge disposal |
Air pollution |
|---|
| Types of pollutants, their sources and impacts, air pollution meteorology, air pollution control, air quality standards and limit |
Municipal solid wastes |
|---|
| Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment, and disposal) |
Noise pollution |
|---|
| Impacts of noise, permissible limits of noise pollution, measurement of noise, and control of noise pollution |
Transportation infrastructure |
|---|
| Highway alignment and engineering surveys; geometric design of highways-cross-sectional elements, sight distances, horizontal and vertical alignments; geometric design of railway track; airport runway length-calculation and correction |
| Taxiway, and exit taxiway design |
Highway pavements |
|---|
| Highway materials-(aggregate and bitumen)-desirable properties and quality control tests; design factors for flexible and rigid pavements; design of flexible pavement using IRC: 37-2012; design of rigid pavements using IRC: 58-2011 |
Traffic engineering |
|---|
| Traffic studies on flow, speed, travel time-delay and O-D study, PCU, peak hour factor, parking study, accident study and analysis, statistical analysis of traffic data; microscopic and macroscopic parameters of traffic flow, fundamental relationships |
| Control devices, signal design by Webster’s method; types of intersections and channelization; highway capacity and level of service of rural highways and urban roads |
Principles of surveying |
|---|
| Errors and their adjustment; maps-scale, coordinate system; distance and angle measurement-levelling and trigonometric levelling; traversing and triangulation survey; total station; horizontal and vertical curves |
Photogrammetry |
|---|
| Scale, flying height; remote sensing-basics, platform and sensors, visual image interpretation; basics of geographical information system (GIS) and geographical positioning system (GPS) |
Discrete mathematics |
|---|
| Propositional and first order logic, sets, relations, functions, partial orders and lattices, groups, graphs: Connectivity, matching, coloring |
| Combinatorics: Counting, recurrence relations, generating functions |
Linear algebra |
|---|
| Matrices, determinants, system of linear equations, Eigenvalues and Eigenvectors, LU decomposition |
Calculus |
|---|
| Limits, continuity, and differentiability, maxima and minima, mean value theorem, integration |
Probability |
|---|
| Random variables: Uniform, normal, exponential, Poisson, and binomial distributions |
| Mean, median, mode, and standard deviation |
| Conditional probability and Bayes theorem |
Digital logic |
|---|
| Boolean algebra, logic gates, flip-flops and counters, combinational and sequential circuits: Minimization, number representations and computer arithmetic (fixed and floating point representations) |
Computer organization and architecture |
|---|
| Machine instructions and addressing modes, ALU, data and control unit, instruction pipelining, memory hierarchy: Cache, main memory and secondary storage, I/O interface (interrupt and DMA) |
Programming and data structures |
|---|
| Programming in C, functions, parameter passing, recursion, structured data types: Arrays, structure, union, strings, pointers, file handling |
| Arrays, stacks, queues, linked lists, trees: Binary trees, binary search trees, tree operations, heaps, graph terminology and representation, graph traversal techniques |
Algorithms |
|---|
| Searching, sorting, hashing, asymptotic notations, time and space complexity |
| Algorithm design techniques: Greedy, dynamic programming and divide‐and‐conquer. Graph traversal techniques, spanning trees, shortest path algorithms |
Theory of computation |
|---|
| Regular expressions and finite automata, context-free grammars and pushdown automata, regular and context-free languages, pumping lemma, turing machines, and undecidability |
Compiler design |
|---|
| Lexical analysis, parsing, syntax-directed translation, runtime environments, intermediate code generation, basics of code optimization |
Operating system |
|---|
| Processes, threads, CPU scheduling, inter‐process communication, concurrency and synchronization, deadlock, memory management and virtual memory, file systems |
Databases |
|---|
| ER‐diagrams, relational model: Relational algebra, tuple relational calculus, SQL, integrity constraints, normal forms, file organization: Indexing, B trees and B+ trees, transactions and concurrency control |
Computer networks |
|---|
| Concept of layering, flow and error control techniques, switching, IPv4/ IPv6, routers, and routing algorithms (distance vector, link state) |
| TCP/ UDP and sockets, congestion control |
| Application layer protocols: DNS, SMTP, POP, FTP, HTTP |
| Basics of Wi-Fi, network security: Authentication, basics of public key and private key cryptography, digital signatures and certificates, firewalls |
Software engineering |
|---|
| Software process models, data flow diagram, UML diagrams, requirements engineering, design, software testing, and maintenance |
Web technologies |
|---|
| XML-documents and vocabularies-versions and declaration, namespaces Javascript and XML: Ajax-DOM based XML processing, event-oriented parsing: SAX-transforming XML documents, selecting XML data: XPATH-template based transformations |
| Selecting XML data: XSLT-displaying XML documents in browsers |
| Separating programming and presentation: JSP technology introduction-JSP and servlets-running JSP applications |
| Web services: JAX-RPC-concepts, writing a Java web service client, describing web services: WSDL-representing data types: XML schema-communicating object data: SOAP related technologies |
Linear algebra |
|---|
| Matrices and determinants, systems of linear equations, Eigenvalues and Eigenvectors |
Calculus |
|---|
| Mean value theorems, theorems of integral calculus, evaluation of definite and improper integrals, partial derivatives, maxima and minima, multiple integrals, Fourier series |
| Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss, and Green's theorems |
Differential equations |
|---|
| First order equation (linear and nonlinear), higher order linear differential equations with constant coefficients, method of variation of parameters, Cauchy's and Euler's equations, initial and boundary value problems |
| Partial Differential Equations and variable separable method |
Complex variables |
|---|
| Analytic functions, Cauchy's integral theorem and integral formula, Taylor's and Laurent's series, residue theorem, solution integrals |
Transforms |
|---|
| Fourier series representation of continuous periodic signals, sampling theorem, Fourier, Laplace, and Z-transforms |
Probability and Statistics |
|---|
| Probability and sampling theorems, conditional probability, probability density function, mean, median, mode and standard deviation, random variables, discrete and continuous distributions, exponential, Poisson, normal, and binomial distribution |
| Correlation and regression analysis |
| Numerical methods: Solutions of nonlinear algebraic equations, single and multi-step methods for differential equations |
Electric circuits and fields |
|---|
| Ideal voltage and current sources, dependent sources, R, L, C elements, KCL, KVL, node and mesh analysis, Thevenin’s, Nortons, superposition and maximum power transfer theorems, transient response of DC and AC networks |
| Sinusoidal steady state analysis, resonance, networks graph theory, two-port network, balanced three phase circuits |
| Coulomb’s law, electrical field intensity, and potential due to point, line |
| Plane and spherical charge distribution |
| Gauss’s law, Ampere’s law, Biot-savart’s law, inductance, dielectrics, and capacitance |
Electrical machines |
|---|
| Single phase transformer-equivalent circuit, phasor diagram, open circuit and short circuit tests, regulation and efficiency; three phase transformers-connections, parallel operation; autotransformer; electromechanical energy conversion principles |
| DC machines-types, windings, generator and motor characteristics, armature reaction and commutation, starting and speed control of DC motors; AC machines-three phase induction motors-principles, types, performance, torque speed characteristics |
| AC machines-starting and speed control; single phase induction motors; synchronous machines-performance, regulation and parallel operation of generators, synchronous motor starting, characteristics and applications; servo and stepper motors |
Powersystems |
|---|
| Basic power generation concepts; transmission line models and performance; cable performance, insulators; corona and radio interference; distribution systems; per-unit quantities; bus impedance and admittance matrices; load flow analysis |
| Voltage and frequency control; power factor correction; symmetrical components; fault analysis; principles of over-current, differential and distance protection; solid state relays and digital protection; circuit breakers; system stability concepts |
| Swing curves and equal area criterion; HVDC transmission and facts concepts, economic load dispatch with and without network losses |
Control systems |
|---|
| Mathematical modeling and representation of systems, feedback principle, transfer function, block diagrams and signal flow graphs, transient and steady-state analysis of linear time invariant systems, Routh-Hurwitz and Nyquist criteria, bode plots |
| Root loci, stability analysis, lag, lead, and lead-lag compensators; P, PI, and PID controllers; state space model, solution of state equation, controllability and observability |
Electrical and electronic measurements |
|---|
| Bridges and potentiometers; PMMC, moving iron, dynamometer and induction type instruments; measurement of voltage, current, power, energy, and power factor; instrument transformers; digital voltmeters and multimeters; phase, time and frequency measurement |
| Q-meters; oscilloscopes; error analysis |
Analog and digital electronics |
|---|
| Characteristics of diodes, BJT, FET; amplifiers-biasing, equivalent circuit and frequency response; oscillators and feedback amplifiers; operational amplifiers-characteristics and applications; simple active filters; VCOs and timers |
| Combinational and sequential logic circuits; multiplexer; Schmitt trigger; multi-vibrators; sample and hold circuits; A/D and D/A converters; 8085 microprocessor basics, architecture, programming and interfacing |
Power electronics and drives |
|---|
| Semiconductor power diodes, thyristors, triacs, GTOS, MOSFETS, and IGBTs-static characteristics and principles of operation; triggering circuits; phase control rectifiers; bridge converters-fully controlled and half controlled |
| Principles of choppers and inverters; basic concepts of adjustable speed DC and AC drives |
Linear algebra |
|---|
| Vector space, basis, linear dependence and independence, matrix algebra, eigenvalues and eigenvectors, rank, solution of linear equations-existence and uniqueness |
Calculus |
|---|
| Mean value theorems, theorems of integral calculus, evaluation of definite and improper integrals, partial derivatives, maxima and minima, multiple integrals, line, surface and volume integrals, Taylor series |
Differential equations |
|---|
| First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, method of variation of parameters, Cauchy's and Euler's equations, initial and boundary value problems |
| Partial Differential Equations and variable separable method |
Complex variables |
|---|
| Analytic functions, Cauchy's integral formula: Cauchy’s integral theorem, Taylor's and Laurent' Series, residue theorem |
Probability and Statistics |
|---|
| Probability, joint and conditional probability, discrete and continuous random variables, probability distribution and density functions |
| Exponential, Poisson, normal and binomial distributions functions, mean, mean square and standard deviation |
Numerical methods |
|---|
| Solutions of nonlinear equations, single and multi-step methods for differential equations |
Networks |
|---|
| Definition and properties of Laplace transform, network solution methods: Nodal and mesh analysis |
| Network theorems: Superposition, Thevenin and Norton's maximum power transfer; Wye-Delta transformation; steady state sinusoidal analysis using phasors; time domain analysis of simple linear circuits, solution of network equations using Laplace transform |
| Frequency domain analysis of RLC circuits; 2-port network parameters: Driving point and transfer functions. State equations for networks |
Signals and systems |
|---|
| Continuous-time and discrete-time Fourier series, continuous-time and discrete-time Fourier transform, DFT and FFT, Z-transform |
| Sampling theorem |
| Linear time-invariant (LTI) systems: Definitions and properties; causality, stability, impulse response, convolution, poles and zeros, parallel and cascade structure, frequency response, group delay, phase delay |
Electronic devices |
|---|
| Energy bands in intrinsic and extrinsic silicon |
| Carrier transport in silicon: Diffusion current, drift current, mobility, and resistivity |
| Generation and recombination of carriers |
| P-N Junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, PIN and avalanche photodiode, basics of lasers |
| Device technology: Integrated circuits fabrication process, oxidation, diffusion, ion implantation, photolithography and twin-tub CMOS process |
Analog circuits |
|---|
| Small signal equivalent circuits of diodes, BJTs, MOSFETs, and analog CMOS |
| Simple diode circuits, clipping, clamping, rectifier |
| Biasing and bias stability of BJT and FET amplifiers |
| Amplifiers: Single-and multi-stage, differential, operational, feedback, and power amplifiers |
| Frequency response of an amplifiers |
| Simple op-amp circuits |
| Filters |
| Sinusoidal oscillators; criterion for oscillation; single-transistor and op-amp configurations |
| Function generators and wave-shaping circuits, 555 timers |
| Power supplies, regulation |
Digital circuits |
|---|
| Boolean algebra, minimization of Boolean functions; logic gates; digital IC families (DTL, TTL, ECL, MOS, CMOS, number systems) |
| Combinatorial circuits: Arithmetic circuits, code converters, multiplexers, decoders, PROMs and PLAs |
| Sequential circuits: Latches and flip-flops, counters, and shift-registers |
| Sample and hold circuits, ADCs, DACs |
| Semiconductor memories: ROM, SRAM and DRAM, microprocessor (8085): Architecture, addressing modes, programming, memory and I/O Interfacing |
Control systems |
|---|
| Basic control system components; feedback principle; transfer function; block diagram representation; signal flow graph; transient and steady-state analysis of LTI systems; frequency response; Routh-Hurwitz and Nyquist stability criteria |
| Bode and root-locus plots; lag, lead and lag-lead compensation; state variable model and solution of state equation of LTI systems |
Communications |
|---|
| Deterministic and random signals, types of noise, autocorrelation, power spectral density, properties of white noise, filtering of random signals through LTI systems |
| Analog communication systems: Amplitude and angle modulation and demodulation systems, spectra of AM and FM, super-heterodyne receivers, circuits for analog communications; information theory: Entropy, mutual information and channel capacity theorem; |
| Digital communications: Sampling theory pulse code modulation (PCM), differential pulse code modulation (DPCM); digital modulation schemes: Amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK, QAM); matched filter receiver |
| Calculation of bandwidth, SNR and BER for digital modulation schemes; fundamental of error correction, hamming codes; timing and frequency synchronization, inter-symbol interference and its mitigation; basics of TDMA, FDMA, and CDMA |
Electromagnetics |
|---|
| Maxwell's equations: Differential and integral forms and their interpretation, boundary conditions, wave equation, Poynting vector; plane waves and properties: Reflection and refraction, polarization, phase and group velocity |
| Plane waves and properties: Propagation through various media, skin depth; transmission lines: Equations, characteristic impedance, impedance matching, impedance transformation, S-parameters |
| Smith chart: Waveguides-modes, boundary conditions, cut-off frequencies, dispersion relations |
| Antennas: Antenna types, radiation pattern, gain and directivity, return loss, basics of radar |
Statistics |
|---|
| Solutions of simultaneous linear equations, quadratic equations, progressions, perambulations and combinations, concepts of matrices and determinants. sample mean and variance, random variable, distributed and continuous distributions |
| Mean and variance of distribution, correlation, coefficient, confidence intervals, goodness of fit, test, pairs of measurements, fitting straight lines |
Introduction to computers and programming |
|---|
| Components of computers, characteristics of computer, modes of operation, type of computer algorithms, flowcharts, programming languages, operating systems, fundamentals of C, structure of C, variables and constants, arithmetic and logical expression |
Nature of ecosystems |
|---|
| Energy flow in ecosystems-energy fixation by autotrophs, energy beyond the producers, biogeochemical cycles and ecosystems, ecology of populations-population growth, age structure, equilibrium level, dynamics of ecological communities |
Major characteristics of microorganisms |
|---|
| Bacteria, fungi, molds and yeasts-algae, protozoa-viruses |
Cultivation of microorganisms |
|---|
| Aerobic and anaerobic cultivation, isolation, enumeration and preservation of microorganisms |
Control of microorganisms |
|---|
| Physical and chemical agents |
Microorganisms in aerobic and anaerobic biological waste treatment |
|---|
| Major groups of microbes and their role |
Microorganisms, growth kinetics |
|---|
| Bacterial growth curve, various phases of growth, growth rate and doubling time |
Basic concepts and scope of environmental chemistry |
|---|
| Environmental segments |
Atmosphere |
|---|
| Structure, chemical and photochemical reactions, and ozone chemistry, greenhouse effect |
Hydrosphere |
|---|
| Hydrologic cycle, chemistry of water, and wastewater |
Lithosphere |
|---|
| Micro and macro nutrients, wastes and pollution of soil, air, and water |
Environmental effects of pollution |
|---|
| Health effects of pollution |
Solid, liquid, and gaseous wastes |
|---|
| Various pollutants and their harmful effects |
Water quality |
|---|
| Water purification systems |
Wastewater characteristics |
|---|
| Primary/ secondary treatment methods |
Air pollution control methods |
|---|
Origin and age of the earth |
|---|
| Internal constitution of the earth, geological processes-exegetic and endogenic, ligneous, metamorphic and sedimentary rocks, distinguishing features of these three types of rocks, basic principle of structural geology, geology of dams and reservoirs |
Geomorphic cycle |
|---|
| Geomorphic agents, definition of weathering, types of weathering physical and chemical, definition of erosion and denudation, cycle of erosion, landforms created by geomorphic agents |
Map terminology |
|---|
| Map reading, topographic map, conventional symbols, locating points, and map projections and classification of maps |
Aerial photogrammetry |
|---|
| Definition, photo scale, classification of aerial photographs, air photo interpretation key elements, photogrammetric terminology |
Remote sensing |
|---|
| Electromagnetic energy, electromagnetic spectrum, various satellites and sensors, latest advancements in satellite remote sensing, general knowledge on Indian remote sensing programmes |
Hydrologic cycle |
|---|
| Precipitation: Different types and forms of precipitation and their mechanism. Rain gauges |
Evaporation and transpiration |
|---|
| Concepts, measurements and factors affecting evaporation, and transpiration |
Infiltration |
|---|
| Concept, measurement and factors affecting infiltration, runoff, definition and factors affecting runoff, stream gauging-computation of runoff |
Occurrence of ground water in consolidated and unconsolidated formations |
|---|
| Types of aquifers |
Properties |
|---|
| Porosity, specific yield, storativity, hydraulic conductivity and transmissivity-Darcy’s law, groundwater management, artificial recharging methods |
Types of wells |
|---|
| Open wells, tube wells, construction of wells |
National water resources problems with reference to the environment of major river valley projects |
|---|
Linear algebra |
|---|
| Matrices and determinants, systems of linear equations, Eigenvalues and Eigenvectors |
Calculus |
|---|
| Limit, continuity, and differentiability, partial derivatives, maxima and minima, sequences and series, test for convergence, Fourier series |
Differential equations |
|---|
| Linear and nonlinear first order ODEs, higher order ODEs with constant coefficients, Cauchy’s and Euler’s equations, Laplace transforms, PDE-Laplace, heat, and wave equations |
Probability and Statistics |
|---|
| Probability and sampling theorem, conditional probability, mean, median, mode and standard deviation, random variables, Poisson, normal, and binomial distributions, correlation and regression analysis |
Numerical methods |
|---|
| Solution of linear and nonlinear algebraic equations, integration of trapezoidal and Simpson’s rule, single, and multistep methods for differential equations |
Food chemistry |
|---|
| Carbohydrates-structure and functional properties of mono, di, and oligo polysaccharides including starch, cellulose, pectic substances and dietary fibre; proteins-classification and structure of proteins in food |
| Lipids-classification and structure of lipids, rancidity of fats, polymerization and polymorphism; pigments-carotenoids, chlorophylls, anthocyanins, tannins and myoglobin; food flavours-terpenes, esters, ketones and quinones |
| Enzymes-Enzymatic and non-enzymatic browning in different foods |
Nutrition |
|---|
| Balanced diet, essential amino acids and fatty acids, PER, water soluble and fat soluble vitamins, role of minerals in nutrition, antinutrients, nutrition deficiency diseases, nutraceuticals |
Food microbiology |
|---|
| Characteristics of microorganisms-morphology, structure and detection of bacteria, yeast and mold in food, spores and vegetative cells; microbial growth in food-intrinsic and extrinsic factors, growth and death kinetics |
| Characteristics of microorganisms-serial dilution method for quantification; food spoilage-contributing factors, spoilage bacteria, microbial spoilage of milk and milk products, meat and meat products; foodborne disease-toxins produced by staphylococcus |
| Foodborne disease-clostridium and aspergillus; bacterial pathogens-salmonella, bacillus, listeria, escherichia coli, shigella, campylobacter |
Biotechnology |
|---|
| Fermented foods-buttermilk, yoghurt, cheese, sausage, alcoholic beverage, vinegar, wine, beer, whisky, sauerkraut, soya sauce, and traditional fermented foods |
Cereals, pulses, and oil seeds |
|---|
| Composition, nutritive value, processing methods and products of: (i) Rice, wheat, and maize, barley, oats, and minor millets; (ii) bengal gram, red gram, green gram, black gram, chickpeas, (iii) ground nut, soya bean, sunflower, and other oil seeds |
Fruits, vegetables, and plantation crops |
|---|
| Extraction, clarification, concentration and packaging of fruit juice, production of jam, jelly, marmalade, squash, candies, and pickles, pectin from fruit waste, tea, coffee, chocolate and essential oils from spices |
Meat, fish, poultry, and milk |
|---|
| Post mortem changes of meat, freezing, aging, pickling, smoking and tenderization of meat, drying and canning of fish |
| Structure, composition, nutritive value and functional properties of eggs and its preservation by different methods |
Milk and milk products processing |
|---|
| Milk processing flow sheet, filtration/ clarification, storage of milk, standardization-simple problems in standardization, homogenization, pasteurization types of pasteurization process |
| Manufacture of cream, butter, ghee, milk powder, cheese |
Fluid mechanics |
|---|
| Nature of fluids, flow properties of fluids, flow through pipes and fittings, flow measurement, transportation of fluids-pumps, compressors, and blowers |
Heat transfer |
|---|
| Heat transfer by conduction, convection, radiation, boiling and condensation, steady and unsteady state heat transfer |
Unit operations |
|---|
| Size reduction, homogenization, filtration, sedimentation, centrifugation, sieving, mixing and agitation, extraction, crystallization, evaporation, drying and extrusion |
| Types of equipment used in each unit operation, their selection, applications in food industry |
Food quality |
|---|
| Food quality and quality attributes-classification of quality attributes and their role in food quality |
| Quality assessment of food materials-fruits and vegetables, cereals and pulses, dairy products, meat, poultry, egg and processed food products sensory evaluation of food quality and its methods food adulteration and food safety |
Standards |
|---|
| Food safety and regulations 2011-scope; definitions and standards of quality and packaging |
| FSMS-22000:2005-various elements included in the standard, introduction to the family of ISO 22000 standards, comparison of ISO 9001:2008 vs. ISO 22000:2005, HACCP-terminology, principles, identification of CCPS |
| Application of HACCP System and the logic sequence involved |
| Codex alimentarius; food safety and standards authority of India (FSSAI) |
Linear algebra |
|---|
| Matrices and determinants, systems of linear equations, Eigenvalues and Eigenvectors |
Calculus |
|---|
| Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl, vector identities |
| Directional derivatives, line, surface and volume integrals, stokes, gauss and green's theorems |
Complex variables |
|---|
| Analytic functions, Cauchy's integral theorem, Taylor, and Laurent series |
Probability and Statistics |
|---|
| Definitions of probability and sampling theorems, conditional probability, mean, median, mode, and standard deviation, random variables, exponential, Poisson, normal and binomial distributions |
Programming in C |
|---|
| Variables, data types, expressions, control structures, arrays, functions, pointers, structures |
Geomorphic processes and agents |
|---|
| Development and evolution of landforms; slope and drainage; processes in deep oceanic and near-shore regions; quantitative and applied geomorphology |
Mechanism of rock deformation |
|---|
| Primary and secondary structures; geometry and genesis of folds, faults, joints and unconformities; cleavage, schistosity and lineation; methods of projection; tectonites and their significance; shear zones; superposed folding; basement-cover relationship |
| Crystallography-symmetry, forms and twinning; crystal chemistry; optical mineralogy, classification of minerals, diagnostic physical and optical properties of rock-forming minerals |
Engineering properties of rocks and soils |
|---|
| Rocks as construction materials; role of geology in the construction of engineering structures including dams, tunnels and excavation sites; natural hazards |
| Ground water geology-exploration, well hydraulics and water quality |
| Basic principles of remote sensing-energy sources and radiation principles, atmospheric absorption, interaction of energy with earth’s surface, aerial-photo interpretation, multispectral remote sensing in visible, infrared |
| Thermal IR and microwave regions, digital processing of satellite images |
| GIS-basic concepts, raster, and vector mode operations |
The earth as a planet |
|---|
| Different motions of the earth; gravity field of the earth, Clairaut’s theorem, size and shape of earth; geomagnetic field, paleomagnetism; geothermics and heat flow; seismology and interior of the earth |
| Variation of density, velocity, pressure, temperature, electrical and magnetic properties of the earth; earthquakes causes and measurements, magnitude and intensity, focal mechanisms, earthquake quantification, source characteristics |
| Seismotectonics, and seismic hazards; digital seismographs |
Continents |
|---|
| Earth composition |
| Earth-orbit |
Oceans |
|---|
| Depth, bottom, relief |
Minerals |
|---|
| Physical properties of minerals |
Surveying methods |
|---|
| Principles of surveying; errors and their adjustment; maps-scale, coordinate system; distance and angle measurement-levelling and trigonometric levelling; traversing and triangulation survey; total station; horizontal and vertical curves |
| Photogrammetry-scale, flying height; remote sensing-basics, platform and sensors, visual image interpretation; basics of geographical information system (GIS) and geographical positioning system (GPS) |
Study of rainfall |
|---|
| Estimation of runoff and evapotranspiration, water table |
Environment |
|---|
| Meaning, scope, components environments |
Soils |
|---|
| Texture, strengths, porosity, and permeability |
Linear algebra |
|---|
| Matrices and determinants, systems of linear equations, Eigenvalues and Eigenvectors |
Calculus |
|---|
| Mean value theorems, theorems of integral calculus, evaluation of definite and improper integrals, partial derivatives, maxima and minima, multiple integrals, Fourier series |
| Vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss, and Green's theorems |
Differential equations |
|---|
| First order equation (linear and nonlinear), higher order linear differential equations with constant coefficients, method of variation of parameters, Cauchy's and Euler's equations, initial and boundary value problems |
| Partial Differential Equations and variable separable method |
Complex variables |
|---|
| Analytic functions, Cauchy's integral theorem and integral formula, Taylor's and Laurent's series, residue theorem, solution integrals |
Probability and Statistics |
|---|
| Probability, sampling theorems, conditional probability, probability density function, mean, median, mode and standard deviation, random variables, discrete and continuous distributions, exponential, Poisson, normal and binomial distribution |
| Correlation and regression analysis |
Numerical methods |
|---|
| Solutions of nonlinear algebraic equations, single and multi-step methods for differential equations |
Basics of circuits and measurement systems |
|---|
| Kirchoff's laws, mesh, and nodal analysis |
| Circuit theorems |
| One-port and two-port network functions |
| Static and dynamic characteristics of Measurement Systems |
| Error and uncertainty analysis |
| Statistical analysis of data and curve fitting |
Transducers, mechanical measurement and industrial instrumentation |
|---|
| Resistive, capacitive, inductive and piezoelectric transducers and their signal conditioning |
| Measurement of displacement, velocity and acceleration (translational and rotational), force, torque, vibration and shock |
| Measurement of pressure, flow, temperature and liquid level |
| Measurement of Ph, conductivity, viscosity and humidity, LVDT, strain gauge and Hall effect sensors |
Analog electronics |
|---|
| Characteristics of diode, BJT, JFET, and MOSFET |
| Diode circuits |
| Transistors at low and high frequencies, amplifiers, single and multi-stage |
| Feedback amplifiers |
| Operational amplifiers, characteristics and circuit configurations |
| Instrumentation amplifier |
| Precision rectifier |
| V-to-i and i-to-v converter |
| Op-amp based active filters |
| Oscillators and signal generators |
Digital electronics |
|---|
| Combinational logic circuits, minimization of boolean functions |
| IC families, TTL, MOS, and CMOS |
| Arithmetic circuits |
| Comparators, Schmitt trigger, timers, and mono-stable multi-vibrator |
| Sequential circuits, flip-flops, counters, shift registers |
| Multiplexer, S/H circuit |
| Analog to-digital and digital to-analog converters |
| Basics of number system |
| Microprocessor applications, memory, and input-output interfacing |
| Microcontrollers |
Signals, systems, and communications |
|---|
| Periodic and aperiodic signals |
| Impulse response, transfer function and frequency response of first-and second order systems |
| Fourier transform, Laplace transform, Z-transform, convolution, correlation, and characteristics of linear time invariant systems |
| Discrete time system, impulse and frequency response |
| Pulse transfer function |
| IIR and FIR filters |
| Amplitude and frequency modulation and demodulation |
| Sampling theorem, pulse code modulation |
| Frequency and time division multiplexing |
| Amplitude shift keying, frequency shift keying, and pulse shift keying for digital modulation |
Electrical and electronic measurements |
|---|
| Bridges and potentiometers, measurement of R, L, and C |
| Measurements of voltage, current, power, power factor, and energy |
| AC and DC current probes |
| Extension of instrument ranges |
| Q-meter and waveform analyzer |
| Digital voltmeter and multimeter |
| Time, phase, and frequency measurements |
| Cathode ray oscilloscope |
| Serial and parallel communication |
| Shielding and grounding |
Control systems and process control |
|---|
| Feedback principles |
| Signal flow graphs |
| Transient response, steady state-errors |
| Routh and Nyquist criteria |
| Bode plot, root loci |
| Time delay systems |
| Phase and gain margin |
| State space representation of systems |
| Mechanical, hydraulic, and pneumatic system components |
| Synchro pair, servo, and step motors |
| On-off, cascade, P, PI, PID, feed forward and derivative controller, fuzzy controllers |
Analytical, optical, and biomedical instrumentation |
|---|
| Mass spectrometry |
| UV, visible, and IR spectrometry |
| X-ray and nuclear radiation measurements |
| Optical sources and detectors, LED, laser, photodiode, photoresistor, and their characteristics |
| Interferometers, applications in metrology |
| Basics of fiber optics |
| Biomedical instruments, EEG, ECG, and EMG |
| Clinical measurements |
| Ultrasonic transducers and Ultrasonography |
| Principles of Computer Assisted Tomography |
Linear algebra |
|---|
| Matrices and determinants, systems of linear equations, Eigenvalues and Eigenvectors |
Calculus |
|---|
| Functions of single variable, limit, continuity, and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl, vector identities |
| Directional derivatives, line, surface and volume integrals, Stokes, Gauss, and Green's theorems |
Differential equations |
|---|
| First order equations (linear and nonlinear), higher order linear differential equations with constant coefficients, Cauchy's and Euler's equations, initial and boundary value problems, Laplace transforms |
| Solutions of one dimensional heat and wave equations and Laplace equation |
Complex variables |
|---|
| Analytic functions, Cauchy's integral theorem, Taylor, and Laurent series |
Probability and Statistics |
|---|
| Definitions of probability and sampling theorems, conditional probability, mean, median, mode, and standard deviation, random variables, exponential, Poisson, normal and binomial distributions |
Numerical methods |
|---|
| Numerical solutions of linear and non-linear algebraic equations, integration by trapezoidal and Simpson's rule, single and multi-step methods for differential equations |
Engineering mechanics |
|---|
| Free body diagrams and equilibrium; friction, rolling friction, belt-pulley, screw jack, wedge trusses and frames; virtual work; kinematics and dynamics of particles and rigid bodies in plane motion |
| Impulse and momentum (linear and angular) and energy formulations; impact |
Strength of materials |
|---|
| Stress and strain, stress-strain relationship and elastic constants, Poisson’s ratio, Mohr's circle plane stress and plane strain, thin cylinders; shear force and bending moment diagrams; bending and shear stresses; deflection of beams |
| Torsion of circular shafts; Euler's theory of columns; strain energy methods; thermal stresses, testing of materials with UTM, hardness and impact strength |
Theory of machines |
|---|
| Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of slider-crank mechanism; gear and gear trains; flywheels, gyroscope and governors, balancing of reciprocating and rotary masses |
Vibrations |
|---|
| Free and forced vibration of single degree of freedom systems; effect of damping; vibration isolation; resonance, critical speeds of shafts |
Machine design |
|---|
| Design for static and dynamic loading; failure theories; fatigue strength the S-N diagram; principles of the design of machine elements such as bolted, riveted and welded joints, shafts, spur gears, rolling and sliding contact bearings |
| Brakes and clutches and springs |
Fluid mechanics |
|---|
| Fluid properties; fluid statics, manometry, buoyancy; forces on submerged bodies, stability of floating bodies, fluid acceleration; differential equations of continuity and momentum; Bernoulli's equation; viscous flow of incompressible fluids |
| Boundary layer; elementary turbulent flow; flow through pipes, head losses in pipes, bends etc |
Heat-transfer |
|---|
| Modes of heat transfer; one dimensional heat conduction, resistance concept, electrical analogy, heat transfer through fins, unsteady heat conduction, dimensionless parameters in free and forced convective heat transfer |
| Various correlations for heat transfer in flow over flat plates and through pipes; thermal boundary layer; effect of turbulence; radiative heat transfer, black and grey surfaces, shape factors, network analysis; heat exchanger performance |
| LMTD and NTU methods |
Thermodynamics |
|---|
| Thermodynamics: Thermodynamic systems and processes; properties of pure substances, behavior of ideal and real gases; zeroth and first laws of thermodynamics, calculation of work and heat in various processes; second law of thermodynamics |
| Thermodynamics: Thermodynamic property charts and tables, availability and irreversibility; thermodynamic relations |
Applications |
|---|
| Power engineering: Air compressors-reciprocating and rotary compressors, Rankine, Brayton cycles with regeneration and reheat |
| I.C. Engines: Air-standard Otto, diesel cycles |
| Refrigeration and air conditioning: Vapour refrigeration cycle, heat pumps, gas refrigeration, reverse Brayton cycle; moist air: Psychrometric chart, basic psychrometric processes |
| Turbomachinery: Pelton wheel, Francis and Kaplan turbines-impulse and reaction principles, velocity diagrams |
Engineering materials |
|---|
| Structure and properties of engineering materials, heat treatment, stress-strain diagrams for engineering materials, iron-carbon diagram |
Metal casting |
|---|
| Design of patterns, moulds and cores; solidification and cooling; riser and gating design, design considerations |
Metal forming |
|---|
| Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load estimation for bulk (forging, rolling, extrusion, drawing) and sheet (shearing, deep drawing, bending) metal forming processes; principles of powder metallurgy |
Joining process |
|---|
| Physics of welding, brazing and soldering; adhesive bonding; design considerations in welding |
Machining and machine tool operations |
|---|
| Mechanics of machining, basic machine tool, single and multi-point cutting tools, tool geometry and materials, tool life and wear; economics of machining; principles of nontraditional machining processes; principles of work holding |
| Principles of design of jigs and fixtures |
Metrology and inspection |
|---|
| Limits, fits, and tolerances; linear and angular measurements; comparators; gauge design; interferometry; form and finish measurement; alignment and testing methods; tolerance analysis in manufacturing and assembly |
Computer integrated manufacturing |
|---|
| Basic concepts of CAD/ CAM and their integration tools |
Production planning and control |
|---|
| Forecasting models, aggregate production planning, scheduling, materials requirement planning |
Inventory control |
|---|
| Deterministic models; safety stock inventory control systems. |
Operations research |
|---|
| Linear programming, simplex method, transportation, assignment, network flow models, simple queuing models, PERT, and CPM |
Linear algebra |
|---|
| Matrices and determinants, systems of linear equations, Eigenvalues and Eigenvectors |
Calculus |
|---|
| Limit, continuity, and differentiability; partial derivatives; maxima and minima; sequences and series; test for convergence; Fourier series |
Vector calculus |
|---|
| Gradient; divergence and curl; line; surface and volume integrals; Stokes, Gauss, and Green's theorems |
Differential equations |
|---|
| Linear and non-linear first order odes; higher order linear odes with constant coefficients; Cauchy's and Euler's equations; Laplace transforms; PDEs-Laplace, heat, and wave equations |
Probability and Statistics |
|---|
| Probability and sampling theorem, conditional probability, probability density function, mean, median, mode and standard deviation; random variables; exponential, Poisson, normal and binomial distributions; correlation and regression analysis |
Numerical methods |
|---|
| Solutions of linear and non-linear algebraic equations; integration of trapezoidal and Simpson's rule; single and multi-step methods for differential equations |
Thermodynamics and rate processes |
|---|
| Laws of thermodynamics, activity, equilibrium constant, applications to metallurgical systems, solutions, phase equilibria, Ellingham and phase stability diagrams, thermodynamics of surfaces, interfaces and defects, adsorption and segregation |
| Basic kinetic laws, order of reactions, rate constants and rate limiting steps; principles of electro chemistry-single electrode potential, electrochemical cells and polarizations, aqueous corrosion and protection of metals |
| Oxidation and high temperature corrosion-characterization and control; heat transfer-conduction, convection and heat transfer coefficient relations, radiation, mass transfer-diffusion and Fick's laws, mass transfer coefficients |
| Momentum transfer-concepts of viscosity, shell balances, Bernoulli's equation, friction factors |
Extractive metallurgy |
|---|
| Minerals of economic importance, comminution techniques, size classification, flotation, gravity, and other methods of mineral processing; agglomeration, pyro-hydro and electro-metallurgical processes; material and energy balances |
| Principles and processes for the extraction of non-ferrous metals-aluminium, copper, zinc, lead, magnesium, nickel, titanium, and other rare metals; iron and steel making-principles, role structure and properties of slags, metallurgical coke |
| Iron and steel making-blast furnace, direct reduction processes, primary and secondary steel making, ladle metallurgy operations including deoxidation, desulphurization, sulphide shape control, inert gas rinsing and vacuum reactors |
| Secondary refining processes including AOD, VAD, VOD, VAR and ESR; ingot and continuous casting; stainless steel making, furnaces and refractories |
Physical metallurgy |
|---|
| Crystal structure and bonding characteristics of metals, alloys, ceramics and polymers, structure of surfaces and interfaces, nano-crystalline and amorphous structures; solid solutions; solidification; phase transformation and binary phase diagrams |
| Principles of heat treatment of steels, cast iron and aluminum alloys; surface treatments; recovery, recrystallization and grain growth; industrially importance |
| Ferrous and non-ferrous alloys; elements of X-ray and electron diffraction; principles of scanning and transmission electron microscopy; industrial ceramics, polymers and composites |
| Electronic basis of thermal, optical, electrical and magnetic properties of materials; electronic and optoelectronic materials |
Mechanical metallurgy |
|---|
| Elasticity, yield criteria, and plasticity; defects in crystals; elements of dislocation theory-types of dislocations, slip and twinning, source and multiplication of dislocations, stress fields around dislocations, partial dislocations |
| Elements of dislocation theory-dislocation interactions and reactions; strengthening mechanisms; tensile, fatigue and creep behaviour; super-plasticity; fracture-Griffith theory, basic concepts of linear elastic and elasto-plastic fracture mechanics |
| Fracture-ductile to brittle transition, fracture toughness; failure analysis; mechanical testing-tension, compression, torsion, hardness, impact, creep, fatigue, fracture toughness, and formability |
Manufacturing processes |
|---|
| Metal casting-patterns and moulds including mould design involving feeding, gating and risering, melting, casting practices in sand casting, permanent mould casting, investment casting and shell moulding, casting defects and repair |
| Hot, warm, and cold working of metals, metal forming-fundamentals of metal forming processes of rolling, forging, extrusion, wire drawing and sheet metal forming, defects in forming; metal joining-soldering, brazing and welding |
| Common welding processes of shielded metal arc welding, gas metal arc welding, gas tungsten arc welding and submerged arc welding; welding metallurgy, problems associated with welding of steels and aluminium alloys, defects in welded joints |
| Powder metallurgy-productions of powder, compaction and sintering process.; NDT using dye-penetrant, ultrasonic, radiography, Eddy current, acoustic emission, and magnetic particle methods |
Engineering mechanics and strength of material |
|---|
| Concurrent forces in a plane and its equilibrium |
| Centroids of composite plane figures |
| General case of forces in a plane |
| Moment of inertia of plane figures |
| Parallel axis theorem |
| Polar MI |
| Concept mass MI |
| Rectilinear translation |
| Kinematics |
| Principal of dynamics Motion of a particle under constant force |
| Force proportional to displacement and free vibrations (S.H.M.) |
| D’Alberts principle |
| Momentum |
| Impulse work and energy |
| Rotation of a rigid body about a fixed axis kinematics |
| Equation of motion of a rigid body about a fixed axis |
| Rotation under constant moment |
| Torsional vibration |
| Simple stresses and strains |
| Stresses on inclined plane |
| 2-dimensional stress systems |
| Principal stress and principal planes |
| Mohr’s circle |
| Shearing force and bending moment |
| Types of loads |
| Types of Supports |
| SF and BM diagrams |
| Bending stresses in beams with rectangular and circulars sections |
| Torsion of circular shafts |
| Determination of shear stress |
Fluid mechanics and heat transfer |
|---|
| Classification of flows-steady, unsteady, uniform, non-uniform, laminar, turbulent, rotational, irrotational flows, vorticity, and circulation-conservation of mass-equation of continuity, conservation of momentum-Euler’s equation |
| Conservation of energy-Bernoulli’s equation and its applications |
| One-dimensional viscous flow |
| Couette flow-plane couette flow |
| Two dimensional viscous flow; navier stokes equations and solutions |
| Laminar Boundary Layer |
| Momentum integral equation-flow over a flat plate-displacement thickness, momentum thickness and energy thickness |
| Turbulent Boundary Layer |
| Laminar-turbulent transition-momentum equations and Reynolds stresses |
| Dimensional Analysis and Modeling Similitude |
| Fundamental and derived dimensions-dimensionless groups, Buckingham theorem, Rayleigh method |
| Elements of heat transfer |
| Steady state conduction, convection and radiation |
| Furnaces |
| Heat utilization in furnaces, available heat, factors affecting it |
| Heat losses in furnaces and furnace efficiency |
| Heat balance and sankey diagrams |
| Principles of waste heat recovery |
| Recuperators and regenerators |
| Types and applicability |
| AMTD and LMTD in recuperators |
| Protective atmosphere and their applications salt bath furnaces |
Elements of material science |
|---|
| Introduction, classification of materials, space lattice and unit cells, crystal systems |
| Indices for planes and directions |
| Structures of common metallic materials |
| Crystal defects: Point, linen, and surface defects |
| Dislocations, types, Burgers’ vector, dislocation movement by climb and cross slip |
| Dislocation sources, dislocation point-defect interaction and pileups |
| Plastic deformation of single crystals |
| Deformation by slip, CRSS for slip |
| Deformation of single crystal |
| Deformation by twinning |
| Stacking faults, hot working, cold working |
| Recovery, recrystallization, and grain growth |
| Hall-Petch equation |
| Tensile stress-strain diagrams, proof stress, yield stress, modulus of elasticity |
| Typical stress-strain diagrams for mild steel cast iron and aluminum alloy |
Metallurgical thermodynamics |
|---|
| Introduction-basic concepts in thermodynamics |
| Objectives and limitations of classical thermodynamics |
| Zeroth law of thermodynamics |
| First law of thermodynamics-forms of energy, heat and work, Joules experiments, conservation of energy, concept of maximum work, isothermal expansion, reversible, adiabatic expansion, constant pressure processes, constant volume processes, enthalpy |
| Second law of thermodynamics-efficiency of cyclic process |
| Carnot cycle |
| Entropy |
| Thermodynamic equation of state |
| Statistical Entropy |
| Physical meaning of entropy, Boltzmann equation, mixing entropy, Stirling’s approximation auxiliary functions |
| Fundamental equations of state, Maxwell relationships, other thermodynamic relations, chemical potential, Gibbs-Helmholtz equation, criteria of equilibria |
| Third law of thermodynamics, heat capacity and entropy changes |
| Sensible heats, transformation heats, reaction heats, adiabatic flame temperatures, heat balances |
| Phase equilibria in one component systems, Clausius-clapeyron equation, heats of vaporization, shift in transformation, temperature with pressure, fugacity, activity, and equilibrium constant |
| Van't Hoff’s isotherm |
| Ellingham diagrams and application |
Advanced material science |
|---|
| Electrical and electronic properties of materials, electronic conductivity, free electron theory and band theory of solids |
| Intrinsic semiconductors |
| Super conductivity |
| Magnetic properties, Dia, para, ferro, ferri magnetism |
| Soft and hard magnetic materials and applications |
| Optical properties of materials |
| Refractive index, absorption emission of light, optical fibers |
| Opto-electronic materials |
| Polymerization, cross linking glass transition, classification of polymers |
| Mechanical properties, dielectric behaviour of materials |
| Uses of polymers |
| Ceramics and glasses, crystalline, and non-crystalline ceramics |
| Major mechanical and optical properties |
| Composite materials |
| Classification |
| Matrices and reinforcements |
| Fabrication methods |
| Examples and applications |
| Nano materials: Importance, emergence of nanotechnology, bottom-up and top-down approaches, challenges in nanotechnology applications |
Sources of crude drugs of natural origin and their classification |
|---|
| Factors affecting the cultivation of medicinal and aromatic plants; plant growth regulators; adulteration and types of adulterants; methods of evaluation of crude drugs |
Definition, classification, properties, general method of extraction, chemistry, tests for detection of following classes of phytoconstituents |
|---|
| Alkaloids, glycosides, terpenoids (volatile oils, resin, and resin combinations), tannins, carbohydrates, lipids, proteins, and enzymes |
| Pharmacognostic aspects of crude drugs containing aforesaid classes of phytoconstituents covering their biological source, diagnostic features, chemical constituents, tests for identification, uses, adulterants, substituents and allied drugs (if any) |
Study of fibres used in pharmacy |
|---|
| Cotton, silk, wool, nylon, polyesters, glasswool, and asbestos |
Plant tissue culture |
|---|
| Types of cultures, nutritional requirements, growth and their maintenance. Applications of plant tissue culture |
Biochemistry |
|---|
| Bimolecular vitamins and enzymes, metabolism of carbohydrates, proteins, lipids, and nucleic acids |
Medicinal chemistry |
|---|
| Introduction to drug design |
| Stereochemistry of drug molecules in relation to biological activity |
| Structure, nomenclature, classification, synthesis, SAR and metabolism of the following category of drugs, which are official in Indian pharmacopoeia and British pharmacopoeia: Hypnotics and sedatives, neuroleptics, antidepressants, anxiolytics |
| Structure, nomenclature, classification, synthesis, SAR and metabolism of the following category of drugs, which are official in Indian pharmacopoeia and British pharmacopoeia: Anticonvulsants, local anaesthetics; cardiovascular drugs: Antianginal agents |
| Cardiovascular drugs: Vasodilators, adrenergic and cholinergic drugs, cardiotonic agents, diuretics, antihypertensive drugs and antilipidemic agents |
| Antihistamines; analgesics; NSAIDS; hypoglycemic agents; anticoagulants; antiplatelet agents; chemotherapeutic agents-antibiotics, antibacterials, antifungal, antiviral, antimalarial, anticancer, and antiamoebic drugs; drugs affecting hormonal function |
Inorganic pharmaceuticals |
|---|
| Gastrointestinal agents; electrolytes; haematinics; topical agents; dental products. Limit tests for arsenic, iron, lead, chloride, and sulphate |
Physical pharmacy |
|---|
| Matter and properties of matter; micromeritics and powder rheology; surface and interfacial phenomenon; viscosity and rheology; dispersion systems; complexation; kinetics and drug stability |
Pharmaceutical microbiology and biotechnology |
|---|
| Methods of sterilization: Moist and dry heat, filtration, radiation and gaseous; sterility testing; media; sampling; neutralization of various antimicrobial substances in dosage forms, principles of microbiological assays |
| Principles of immunology-immunity; classification of immunity; natural and acquired immunity; manufacture and standardization of cholera, BCG, polio and rabies vaccines; diphtheria toxoid, tetanus antitoxin |
| Monoclonal antibodies-preparation and applications of antibiotics and hormones |
Pharmaceutical technology |
|---|
| Preformulation studies; pharmaceutical calculations; formulation, development, packaging and evaluation of: Liquid dosage forms, semisolid dosage forms, tablets, capsules, micro-encapsulation, aerosols, parenteral products, Ophthalmic preparations |
| Packaging and evaluation of: Suppositories, blood products and plasma substitutes and surgical products; cosmetic preparations: Skin, hair, nails, lips, eye, baby care products, and dentifrices |
Biopharmaceutics and pharmacokinetics |
|---|
| Passage of drugs across biological barrier; factors influencing absorption: biological, physico-chemical, physiological and pharmaceutical |
| Basic principles of pharmacokinetics; Compartment modeling: one compartment model with reference to intravascular and oral drug administration, concept of clearance |
| Non-linear pharmacokinetics with reference to one compartment model after I.V. drug administration; bioavailability and bioequivalence |
Pharmacology |
|---|
| General pharmacological principles including toxicology; pharmacology of drugs acting on central nervous system, cardiovascular system (including diuretics), autonomic nervous system, gastrointestinal system and respiratory system |
| Pharmacology of autacoids-histamine, antihistaminic drugs |
| 5-HT-its agonists and antagonists, prostaglandins, thromboxanes, and leukotrienes. steroidal and nonsteroidal anti-inflammatory drugs |
| Pharmacology of drugs acting on endocrine system: Thyroid hormones and antithyroid drugs, insulin, oral hypoglycemics, estrogens, progesterone and oral contraceptives, androgens and anabolic steroids |
| Chemotherapeutic agents; bioassays; immunopharmacology: Drugs acting on the blood and blood forming organs |
Clinical pharmacy |
|---|
| Therapeutic drug monitoring, dosage regimen in renal and hepatic impairment |
| Drug-drug interactions and drug-food interactions, adverse drug reactions |
| Medication history and review, and patient counseling |
Pathophysiology of common diseases |
|---|
| Parkinsonism |
| Schizophrenia |
| Depression, stroke (ischemic and hemorrhage) |
| Hypertension |
| Angina |
| Myocardial infarction, CCF |
| Atherosclerosis, diabetes mellitus, peptic ulcer, and inflammatory bowel disease |
| Cirrhosis and alcoholic liver diseases, acute and chronic renal failure |
| Asthma and chronic obstructive airway diseases |
Pharmaceutical analysis and quality assurance |
|---|
| Concepts of qualitative and quantitative analysis |
| Fundamentals of volumetric analysis: Methods of expressing concentration, primary, and secondary standards, standardization. Acid-base, oxidation-reduction, precipitation, non-aqueous and complexometric titrations and gravimetric analysis |
| Fundamentals of volumetric analysis: Methods of moisture determination; concept of error, precision, accuracy, specificity, sensitivity, detection limit, linearity and range. Ruggedness; calibration of analytical equipment |
| Principles, instrumental analysis and applications of the following: Absorption spectroscopy (UV, visible, and IR), fluorimetry, flame photometry, refractometry, polarimetry, potentiometry, conductometry, and polarography |
| Principles, instrumental analysis and applications of the following: Chromatographic methods; paper, TLC, column, GC and HPLC and electrophoresis. RIA, ELISA, and pharmacopoeial assays |
| Quality assurance and quality control methods |
| Concept of GMP,GLP, and GCP |
Forensic pharmacy |
|---|
| Pharmacy act 1948; drugs and cosmetics act 1940 and rules 1945 and amendments thereto; narcotic drugs and psychotropic substances act 1985 and rules; drugs price control order |
Linear algebra |
|---|
| Matrices and determinants; systems of linear equations; Eigenvalues and Eigenvectors |
Calculus |
|---|
| Limit, continuity, and differentiability; partial derivatives; maxima and minima; sequences and series; test for convergence; Fourier series |
Vector calculus |
|---|
| Gradient; divergence and curl; line; surface and volume integrals; Stokes, Gauss, and Green’s theorems |
Differential equations |
|---|
| Linear and non-linear first order ODEs; higher order linear ODEs with constant coefficients; Cauchy’s and Euler’s equations |
Probability and Statistics |
|---|
| Measures of central tendency; random variables; Poisson, normal, and binomial distributions; correlation and regression analysis |
Numerical methods |
|---|
| Solutions of linear algebraic equations; integration of trapezoidal and Simpson’s rule; single and multi-step methods for differential equations |
Mine development |
|---|
| Methods of access to deposits; underground drivages; drilling methods and machines; explosives, blasting devices, and practices |
Mine surveying |
|---|
| Levels and leveling, theodolite, tacheometry, triangulation; contouring; errors and adjustments; correlation; underground surveying; curves; photogrammetry; field astronomy; EDM and total station; introductory GPS |
Engineering mechanics |
|---|
| Equivalent force systems; equations of equilibrium; two dimensional frames and trusses; free body diagrams; friction forces; particle kinematics and dynamics; beam analysis |
Geomechanics |
|---|
| Geotechnical properties of rocks; rock mass classification; instrumentation and stress measurement techniques; theories of rock failure; ground vibrations; stress distribution around mine openings; subsidence; rock bursts and coal bumps; slope stability |
Ground control |
|---|
| Design of pillars; roof supporting systems; mine filling |
Mining methods |
|---|
| Surface mining: Layout, development, loading, transportation and mechanization, continuous surface mining systems; underground coal mining: Bord and pillar systems, room and pillar mining, longwall mining, thick seam mining methods; highwall mining |
| Underground metal mining: open, supported and caved stoping methods, stope mechanization, ore handling systems |
Mining machinery |
|---|
| Generation and transmission of mechanical, hydraulic and pneumatic power; materials handling: Haulages, conveyors, face and development machinery, hoisting systems, pumps, crushers |
Surface environment |
|---|
| Air, water, and soil pollution: Standards of quality, causes and dispersion of contamination, and control; noise; land reclamation |
Mine ventilation |
|---|
| Underground atmosphere; heat load sources and thermal environment, air cooling; mechanics of airflow, distribution, natural and mechanical ventilation; mine fans and their usage; auxiliary ventilation; ventilation planning; ventilation networks |
Subsurface hazards |
|---|
| Mine gases |
| Underground hazards from fires, explosions, dust and inundation; rescue apparatus and practices; safety in mines; accident data analysis; mine lighting; mine legislation; occupational safety |
Mine economics |
|---|
| Mineral resource classification; discounted cash flow analysis; mine valuation; mine investment analysis; mineral taxation |
Mine planning |
|---|
| Sampling methods, practices and interpretation; reserve estimation techniques: Basics of geostatistics and quality control; optimization of facility location; work-study |
Systems engineering |
|---|
| Concepts of reliability; reliability of simple systems; maintainability and availability; linear programming, transportation and assignment problems; network analysis; inventory models; queueing theory; basics of simulation |
Linear algebra |
|---|
| Matrices and determinants, systems of linear equations, Eigenvalues and Eigenvectors |
Calculus |
|---|
| Limit continuity and differentiability; partial derivatives; maxima and minima; sequences and series; test for convergence; Fourier series |
| Vector calculus: gradient; divergence and curl; line a; surface and volume integrals, Stokes, Gauss, and Green’s theorems |
Differential equations |
|---|
| Linear and non-linear first order ODE’s; higher order linear ODE’s with constant coefficients; Cauchy’s and Euler’s equations; Laplace transforms; PDEs-Laplace, heat, and wave equations |
Probability and Statistics |
|---|
| Mean, median, mode and standard deviation; Ransom variable; Poisson, normal, and binomial distributions; correlation and regression analysis |
Numerical methods |
|---|
| Solutions of linear and non-linear algebraic equations; integration of trapezoidal and Simpson’s rule; single and multi-step methods for differential equations |
Textile fibres |
|---|
| Classification of textile fibres, fibre properties, new fibres, substrate and geometry, spinning of man made fibres and terms related, spinnerets, properties of cotton, wool, silk and bast fibres |
| Comparison of natural and man-made fibres for production and properties, spin finish, types of silk yarns, types of silk fabrics, types of yarn (single, multi fold, and fancy) |
Silk technology |
|---|
| Types of silks, production of silk from mulberry, rearing, reeling, throwing process, elements of quality in silk |
Yarn count systems |
|---|
| Yarn numbering systems, differences, conversion from one system to other |
New and unconventional natural fibres |
|---|
| Organic, Bt, PALF, bamboo, maize, applications |
Textile testing |
|---|
| Objectives, number of sample and sample preparation methods, testing of fibres, yarns and fabrics for properties, interpretation of results using statistics, role of SHF, KESF, FAST, AFIS systems |
Blow room |
|---|
| Cotton selection, mixing and blending, selection of openers and cleaners, parameters controlling quality, modern developments in openers and blow room |
Carding drawing |
|---|
| Objectives, elements, role played, setting, modern developments in card and, drawframe, quality control aspects |
Comber and simplex |
|---|
| Preparatory process to combing, selection of machines, quality control at comber; simplex objectives, elements, role played, setting, modern developments, and quality control |
Ring frame and post spinning |
|---|
| Objectives, elements, role played, setting, modern developments and quality control in ring spinning; post spinning machines, selection |
Spin plan |
|---|
| Preparation of spin plan for cotton, blends, and synthetics |
Advanced yarn manufacture |
|---|
| Principles of open end spinning, selection criterion, elements and working of rotor, DREF, and air jet spinning |
Texturing |
|---|
| Principles and methods of texturing, application |
Winding |
|---|
| Types of spinning packages, principles of winding, selection criterion, systems of yarn preparation, practical aspects, kinetics of winding, productivity of winding, quality control aspects and production planning |
Warping |
|---|
| Types of warping, selection criterion, practical aspects, practical aspects of sectional warping, productivity, quality control aspects, and production planning |
Sizing |
|---|
| Different methods of types of sizing, elements of sizing machine, size preparation and devices, size ingredients and selection, calculation of concentration of size recipe, quality control aspects, role of each zone, productivity of winding |
| Quality control aspects, and production planning |
Post sizing |
|---|
| Selection of heald, reed and drop wire, and their selection |
Loom shed |
|---|
| Weave preparatory plan, introduction to weaving, loom specification and loom (shuttle) classification and elements and mechanisms, quality control and production aspects, loom primary and secondary motions, shedding devices and sheds, automatic weaving |
| Dobby and Jacquard shedding, box motions, practical problems, timing of looms, setting of looms for different types of fibres and sorts |
Unconventional weaving |
|---|
| Principles, selection criterion, working elements of gripper projectile, rapier, airjet and waterjet weaving, multiphase weaving, triaxial weaving |
Fabric structure |
|---|
| Elements of fabric structure, representation, primary, secondary and special weaves, compound structures and their features |
Knitting |
|---|
| Principles of loop formation in latch, beard and compound needle in weft knitting, machine arrangement for rib, purl and interlock, methods of representation of knit structure, geometry of knits, elements of warp knitting, machine aspects |
| Loop formation in latch, beard and compound needle, type of warp knit structure, calculations in weft and warp knitting |
Nonwoven fabrics |
|---|
| Differences between woven, knitted and nonwoven, methods of nonwoven, selection, production of needle punched nonwoven, properties, and applications |
Textile wet processing |
|---|
| Grey cloth inspection, method of water calculation, elements, process and parameters of singeing, desizing, scouring, bleaching, mercerizing and quality control aspects, dyeing and elements of dyeing, dyes and classification, dyeing methods |
| Faults of dyeing, printing and its elements, methods of printing, print paste preparation and elements of print paste, role played by each element, printing machines, selection of printing methods; finishing elements and methods |
| Types of finishes and machines used |
Sourcing |
|---|
| Need, scope, role played by sourcing manager |
Markers and marker planning |
|---|
| Need and scope of markers, types, marker making methods (manual and automated), constraints on fabric width, checks and stripes, constraints on grain direction |
Spreading |
|---|
| Need, objectives, requirements and methods of spreading, economic cut quantities, factors affecting economic cut quantities, computerized cut order planning |
Cutting |
|---|
| Objectives, methods of cutting, types of cutting machines and applications, study on computer controlled cutting machine, role of CNC machines in cutting, laser, water jet and plasma cutting |
| Stickering, bundling, dispatch |
Sewing technology |
|---|
| Introduction to sewing machines, types, sewing machine-components and functions of sewing machine |
| Embroidery machines-mechanism, stitch formation, computer controlled embroidery sewing machine |
| Selection of stitches and stitching mechanism: Classification, comparison of stitches, and Its usage |
| Seams: Definition, types of seams, seam finishes |
Sewing threads |
|---|
| Types, selection of sewing threads, sewing problems |
| Sewing thread consumption, work aids, care labelling |
Fusing technology |
|---|
| Need, methods, requirement of fusing process, fusing machinery |
| Quality control in fusing |
| Pressing of garment and equipment |
Washing |
|---|
| Types, principles of laundering, different methods of washing, characteristics of washing machine |
Admissions Open for M.Tech programs across 6 campuses | Kochi, Faridabad, Coimbatore, Bengaluru, Chennai and Amritapuri | Ranked #7 in India by NIRF, NAAC A++ Accredited
The authorities have released the TS PGECET 2024 exam pattern on the official website. Candidates planning to take the TS PGECET exam 2024 must go through the exam pattern beforehand. The exam pattern of TS PGECET 2024 consists of time duration, marking scheme, total marks, subject-wise marks, and the subjects on which the question paper will be based. The exam will be conducted in Computer Based Test (CBT).
Particulars | Details |
Medium of Question Paper | English only |
Mode of test | Computer Based Test |
Duration of the examination | 2 hours |
Total number of questions | 120 |
Marking Scheme | 1 mark for each correct answer |
Type of questions | Multiple-choice objective-type questions |
Negative Marking | Not applicable |
To practise on the TS PGECET Mock Test for Aerospace Engineering click here
The TS PGECET mock test for Architecture and Planning has not been announced yet and will be updated here after it is announced by the University
To practise on the TS PGECET Biomedical Engineering paper click here
To use the TS PGECET Biotechnology Mock test click here
Click here to practise with TS PGECET mock test for Chemical Engineering.
Click here to start the TS PGECET Civil Engineering mock test
To practise with the TS PGECET Computer Science and Information Technology Mock Test Click here
Click here to practise with the TS PGECET Mock Test for Electrical Engineering
To use the mock test for TS PGECET Electronics and Communication Engineering click here
To use the TS PGECET Mock Test for Environmental Management by click here
To practise with TS PGECET Mock Test for Food Technology click here
Click here to practise with TS PGECET Geo-Engineering & Geo-Informatics Mock Test
To practise with TS PGECET Instrumentation Engineering Mock Test click here
Click here to use the Mock Test for TS PGECET Mechanical Engineering
Click here to practise with TS PGECET Metallurgical Engineering Mock test
To practise with TS PGECET Nano Technology Mock Test click here
Click here to practise with the TS PGECET Pharmacy Mock Test
TSCHE will issue the hall ticket of TS PGECET 2024 on its official website on May 28. Candidates will have to download their TS PGECET hall ticket 2024 from the candidate portal by logging in with the help of their registration number, date of birth, and selecting the stream they have applied for. Candidates must check the details provided on the TS PGECET 2024 hall ticket and should contact the admission authority in case of any discrepancy.
Candidates can refer to the following steps to download the hall ticket of TS PGECET 2024 -
Visit the TS PGECET official website- pgecet.tsche.ac.in.
Click on the “Download TS PGECET Hall Ticket ” link.
Enter the registration number, date of birth and exam paper appearing for.
Click on the “Submit’ button
TS PGECET hall ticket 2024 will be displayed on the screens.
Download the hall ticket of TS PGECET 2024 and take a printout.
Name of the candidate
Category
Date of birth
Roll number
Photograph and signature of candidate
Father's name
Date and time of TS PGECET 2024 exam
Venue of TS PGECET exam centre
Exam day guidelines
| State | City |
|---|---|
| Telangana | Hyderabad |
| Warangal |
TS PGECET Answer Key for Aerospace Engineering
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Architecture and Planning
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Biomedical Engineering
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Biotechnology
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Chemical Engineering
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Civil Engineering
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Computer Science and Information Technology
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Computer Science and Information Technology
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Electronics and Communication Engineering
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Environmental Management
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Food Technology
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Geo-Engineering & Geo-Informatics
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Instrumentation Engineering
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Mechanical Engineering
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Metallurgical Engineering
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Nano Technology
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TS PGECET Answer Key for Pharmacy
| Year | Question Paper | Answer Key |
| 2019 | Coming soon | Coming soon |
| 2018 | click here | click here |
TSCHE will declare the result of TS PGECET 2024 on its official website in online mode. Candidates can download their TS PGECET result 2024 from the candidate portal by logging in with the help of their registration number, date of birth, and selecting the stream they have applied for. Candidates are advised by the authorities to check the details provided on the TS PGECET 2024 result and should contact the admission authority in case of any discrepancy.
Candidates can refer to the following steps to download the hall ticket of TS PGECET 2024 -
Visit the TS PGECET official website- pgecet.tsche.ac.in.
Click on the “Download TS PGECET Result” link.
Enter the registration number, date of birth and exam paper appearing for.
Click on the "Submit" button
TS PGECET result 2024 will be displayed on the screens.
Download the result of TS PGECET 2024 and take a printout.
Name of the candidate
Category
Date of birth
Roll number
Photograph and signature of the candidates
Father's name
Subjectwise scores
The authorities will announce the cutoff of TS PGECET 2024 on the official website. The TS PGECET cutoff is the minimum score that the candidates will be required by the aspirants to attain if they wish to take admissions in M.Tech degree programmes in the participating institutes. The authorities consider several factors such as the availability of seats, difficulty level of exam, number of candidates applying for the exam before preparing the TS PGECET 2024 cutoff. Candidates who will get marks above the cutoff will have a higher chance of getting admissions in the participating institutes of TS PGECET 2024.
Mode of Counselling: Online
The exam conducting authority has announced the counselling dates for TS PGECET 2024. To appear in the TS PGECET counselling, candidates have to register themselves by paying the fee payment and uploading their documents. The TS PGECET 2024 counselling fees of Rs. 1200 for General category and Rs. 600 for SC/ST categories shall be paid during the counselling registration. Candidates have to fill their choices and college in order of preference during the TS PGECET 2024 counselling. The authorities conducted the TS PGECET 2024 seat allotment on the basis of ranks secured and merit list. Candidates who will be allotted seats under TS PGECET seat allotment 2024 will have to visit the allotted institutes to complete the document verification and payment of admission fee.
| State | City |
|---|---|
| Telangana | Hyderabad |
| Validity of Exam Result: | For 1 Year |
| Mode of Exam: | Online |
| Contacts: | 04027097124 |
| +1 More | |
| Relevant Links: | Official Website Link Click Here |
| +1 More |
Answer:
TS PGECET result 2024 will be declared on the official website.
Answer:
Candidates will be able to download the TS PGECET hall ticket 2024 at pgecet.tsche.ac.in using their registration number, date of birth and exam paper for entrance test.
Answer:
TS PGECET 2024 hall ticket will be released on May 28 on the official website.
Answer:
The TS PGECET 2024 exam will be conducted from 6 to 9, 2024.
Answer:
TS PGECET 2024 application form was released on March 16.
Hello,
In Telangana, candidates who secure a rank under 50 or sometimes under 100 in the TS PGECET may be eligible for fee reimbursement or tuition fee waiver schemes offered by the state government. However, eligibility for these schemes can vary depending on factors such as family income, category (SC/ST/BC), and specific policies implemented by the government.
Hope this helps,
Thank you
Hi,
You should get in top 100 of your respective course .
For computer science it's more higher
Anyway some of the geotechnical course cutoff rank was near to 230 for jntu
Osmania has higher cutoff than jntu being a premier institute and better placement
https://www.google.com/amp/s/engineering.careers360.com/articles/ts-pgecet-cutoff/amp
The closing rank for open category (general) in TS PGECET was nearly 2508 in Jawaharlal Nehru Technological University, Hyderabad (JNTU) and 2500 in Osmania University (OU). But still, we cannot surely predict the closing rank for JNTU and OU for current year. You can get an idea based on the previous year rank list. Also the admission varies based on the number of applicants and many other factors. So better give a try and apply for admission if you want to get into JNTU and OU.
Hope this helps
Wish you luck
Hi congratulations you got an decent rank in ts pgecet here I'm providing some of the college below for your rank in ts pgecet
Hi congratulations you got an decent rank in ts pgecet here I'm providing some of the college below for your rank in ts pgecet
Congratulations on your result. With your rank of 6 in PGECET you may get Instrumentation Branch in Osmania University,Hyderabad. You can participate in counselling procedure fr TS PGECET by online appliation. The counselling would happen tentatively on 3rd or 4th week of July. Hope this answer was helpful.
04027097124
919502721173
Regular exam updates, QnA, Predictors, College Applications & E-books now on your Mobile