About JEE Main 2020

NTA released JEE Main 2020 application form on September 3 at jeemain.nic.in. The last date to register for JEE Main 2020 is September 30 and the last date to pay the application fee is October 1.  There are major changes in the registration process of JEE Main this year. National Testing Agency (NTA) will conduct JEE Main 2020 January session in computer based mode from January 6 to 11 for admissions to various B.Tech/B.E. programmes offered by 31 NITs, 25 IIITs and 28 CFTIs. JEE Main 2020 will be held for 2 papers where Paper-I is for B.Tech admissions and Paper-II for B.Arch and B.Plan admissions. The admit card will be released on December 6, 2019. NTA will declare the JEE Main result on January 31, 2020. Also check the changes in JEE Main 2020 like exam centres, paper pattern, etc below

New Changes announced by NTA in JEE Main 2020:

  • JEE Main Application Form 2020  is now available and the registration involves input of personal and contact details with password of the candidate's choice unlike previous years when only basic details were input.
  • Fee has increased across all categories and payment mode is now online only. There is no offline payment mode
  • JEE Main 2020 exam centres have been reduced to 233. Last year they were 264 in India.
  • A major change has been announced in the JEE Main 2020 exam pattern with reduction of number of questions, changes in marking scheme and total marks. Numerical questions have been introduced for Maths, Physics, Chemistry while Paper 2 has been clearly demarcated for B.Arch and B.Plan students.
  • Total number of questions have been reduced to 75 from the earlier 90 questions for Paper 1. Negative marking has been removed for numerical questions such that 15 questions for 60 marks in Paper 1 have no negative marking.
  • B.Arch applicants have to appear for drawing while B.Plan aspirants attempt questions on planning.

Candidates can appear twice for JEE Main 2020 -January and April. The JEE Main application form for April session will be available from February 7 to March 7 with download of the admit card from March 16. The JEE Main April session exam will be held from April 3 to 9 with result declaration on April 30. The better of the two scores will be used for the purpose of ranking as per the regulations laid by the authorities. States like Odisha, Madhya Pradesh, Haryana, Uttarakhand, Bihar, Jharkhand and Nagaland as well many other private universities and institutes use JEE Main ranks for admissions; however, admission criteria for these will be notified by the concerned authorities only.

Exam level: National Level Exam
Frequency: 2 times a year
Languages English, Gujarati +1 More
Conducting Body: National Testing Agency
Duration 3 Hours

Download all details about JEE Main 2020

Download Brochure

JEE Main Apr 2020 Important Dates

JEE Main (Session Jan 2020)

Upcoming Dates and Events

03 Sep, 2019 - 30 Sep, 2019

Application - January session registration | Mode: Online Ongoing

12 Sep, 2019 - 30 Sep, 2019

Start of photo correction facility | Mode: Online Ongoing

11 Oct, 2019 - 17 Oct, 2019

Application Correction | Mode: Online

06 Dec, 2019

Admit Card - January session | Mode: Online

06 Jan, 2020 - 11 Jan, 2020

Exam - January session | Mode: Online

31 Jan, 2020

Result - January session | Mode: Online

Past Dates and Events

03 Sep, 2019

Advertisement | Mode: Online

JEE Main (Session Apr 2020)

Upcoming Dates and Events

07 Feb, 2020 - 07 Mar, 2020

Application | Mode: Online

16 Mar, 2020

Admit Card | Mode: Online

03 Apr, 2020 - 09 Apr, 2020

Exam | Mode: Online

30 Apr, 2020

Result | Mode: Online

All aspirants must adhere to the prescribed NTA JEE Main 2020 eligibility criteria. It includes guidelines for age, requisite academic qualifications, subjects studied in qualifying exam, pass percentage etc. The detailed JEE Main eligibility criteria to appear for the entrance exam are specified below

Age Criteria: There is no age limit for JEE Main 2020. 

Qualifying Examinations: Candidates must have passed class 12 or equivalent exam in 2018 or 2019. Candidates appearing for class 12 board examination in 2020 will be also eligible for JEE Main.

Subjects to be Qualified in Qualifying Examination: Candidates must have studied a minimum of 5 subjects which will be considered. They are Mathematics, Physics, Chemistry/Biology/Biotechnology/Technical Vocational Subject, Language and any other subject. Candidates who have taken four subjects will not be eligible.

Number of attempts: All aspirants can appear twice in a year. Students can appear for JEE Main for three years consecutively therefore the total attempts allowed for each student will be six in three years

For JEE Main Paper II- Candidates applying for B.Arch programme must have passed 10+2 or equivalent examination with 50% marks in Physics, Chemistry and Mathematics individually and in aggregate. Diploma holders are not eligible for the entrance exam.

Qualifying Marks for Admission into IITs, NITs, IIITs and CFTIs: Gen/OBC candidates must have scored a minimum of 75% marks or should be in the top 20 percentile of their respective boards. Candidates belonging to SC/ST category must have minimum scores of 65% or be in the top 20 percentile of their boards.

Reservation Criteria

Category

Reservation

Other Backward Classes (OBC) if they belong to Non-Creamy Layer (NCL)

27%

Scheduled Castes (SC)

15%

Scheduled Tribes (ST)

7.5%

Persons with Disability (PwD)with 40% or more disability

3% horizontal

Female Category (supernumerary) only in NITs
8 to 14 %
EWS (Supernumerary)
10%


Note: Reservation for the NITs, IIITs and GFTIs will be as per the central list and not as per the state of eligibility.

Applications Open Now
Aakash National Talent Hunt Exam (ANTHE) 2019
Up to 100% Scholarships | Daily Practice Test worth Rs. 1999/- FREE | Last 10 Year ANTHE Sample Paper- FREE
Apply

Mode of Application : Online

Mode of Payment : Net Banking | Credit Card | Debit Card | Paytm | BHIM

JEE Main 2020 application form for January session is available in online mode by NTA on September 3, 2019. Candidates must register for JEE Main 2020 and fill the application form by September 30. The application form for Paper 1 and 2 is the same. Candidates can fill the application form either for Paper 1 or Paper 2 or for both. To fill the application form of JEE Main 2020, the candidates have to follow the given below steps:

Step 1: Registration- Candidates have to register first by entering personal and contact details. Next the password must be input as per the given specifications.On successful registration, the JEE Main 2020 application number is generated.

Password specifications are - It must have 8 to 13 characters with at least one Upper case, one lower case alphabet, one numeric value and one special character - [email protected]#$%^&*

Step 2: Fill JEE Main 2020 Application Form – Candidates have to enter the following details

  • Examination Related Details: Paper appearing for (Paper 1 or 2 or both), choice of any 4 examination centres , preferred language for exam (English/ Hindi/ Gujarati). Next other details have to be entered as follows
  • Academic details
  • Guardian Income

Step 3: Upload Scanned Images of Documents – The third step is to upload the scanned images of the specified documents in the prescribed format and dimensions. 

Specifications of Scanned Documents

Image

File Size

Dimensions

File Format

Recent Photograph with name of candidate below and date on which the photograph was taken

10KB to 200KB

3.5 cm x 4.5 cm

JPEG/JPG

Signature of Candidates

4 KB to 300KB

3.5 cm x 1.5 cm

JPEG/JPG


Step 4: Make Fee Payment- Candidates will have to pay the requisite fee of entrance exam either in online mode only

JEE Main 2020 Application Fees

Paper (s) Appearing

JEE Main 2020 Application Fees (Rs)

General/OBC

SC/ST/PWD

For Exam Centres in India

JEE Main Paper I (B.E./B.Tech) or JEE Main Paper II (B. Arch/B.Planning) only

650 (Boys)

325(Girls)

325 (Boys)

325 (Girls)

Both JEE Main Paper I (B.E./B.Tech) and JEE Main Paper II (B. Arch/B.Planning)

1300 (Boys)

650 (Girls)

650 (Boys)

650 (Boys)

For Exam Centres in Foreign Country

JEE Main Paper I (B.E./B.Tech) or JEE Main Paper II (B. Arch/B.Planning) only

3000 (Boys)

1500 (Girls)

3000 (Boys)

1500 (Girls)

Both JEE Main Paper I (B.E./B.Tech) and JEE Main Paper II (B. Arch/B.Planning)

6000 (Boys)

3000 (Girls)

3000 (Boys)

3000 (Girls)


Mode of Payment: Debit card/Credit card/Net Banking/ UPI and Paytm services. 

Step 5: Print out of Acknowledgement/ Confirmation Page: Once the application form is submitted, take 4 print out the acknowledgement page and keep it safely for future use.

Check Payment Status -

Candidates may login to see if their payment status is "OK". Only then can they print the confirmation page. The following steps have to be followed if the payment status is not "OK":

  • In case of online payment:  This means that the transaction has been cancelled. While the amount will be refunded automatically within 7 to 10 days, candidates have to pay the fees once again.

JEE Main 2020 Correction Window- NTA will provide JEE Main 2020 application correction facility from October 11 to 17, 2019. During this time period, candidates can edit some of the prescribed information in their application form. In case of category change from reserved to general, the difference in fee must be paid online. However in case of a change from general to reserved category, there will be no refund of the difference in fee.

Application Fees

Category Quota Mode Gender Amount
General, OBC Offline, Online Male ₹ 650
ST, SC Offline, Online Male, Transgender ₹ 325
ST, SC, General, OBC Offline, Online Female ₹ 325
ST, SC, General, OBC PWD Offline, Online Female, Male, Transgender ₹ 325

JEE Main 2020 Syllabus

JEE Main Paper 1 Syllabus

Mathematics
Sets, relations and functions Sets and their representation
Union
Intersection and complement of sets and their algebraic properties
Power set
Relation
Types of relations
Equivalence relations
Functions
One-one, into and onto functions
Composition of functions
Complex number and quadratic equations Complex numbers as ordered pairs or reals
Representation of complex numbers in the form a+ib and their representation in a plane
Argand diagram
Algebra of complex numbers
Modulus and argument of a complex number
Square root of a complex number
Triangle inequality
Quadratic equation in real and complex number system and their solutions
Relation between roots and co-efficients
Nature of roots
Formation of quadratic equations with given roots
Matrices and determinants Matrices
Algebra of matrices
Types of matrices
Determinants and matrices of order two and three
Properties of determinants
Evaluation of determinants
Area of triangles using determinants
Adjoint and evaluation of inverse of a square matrix using determinants and elementary transformations
Test of consistency and solution of simultaneous linear equations in two or three variables using determinants and matrices
Permutations and combinations Fundamental principle of counting
Permutation as an arrangement and combination as selection
Meaning of P (n, r) and C (n, r). Simple applications
Mathematical induction Principle of mathematical induction and its simple applications
Binomial theorem and its simple applications Binomial theorem for a positive integral index
General term and middle term
Properties of binomial coefficients and simple applications
Sequences and Series Arithmetic and geometric progressions
Insertion of arithmetic, geometric means between two given numbers
Relation between A.M. and G.M., Sum up to n terms of special series Sn, Sn2, Sn3
Arithmetico-Geometric progression
Limit, continuity and differentiability Real functions
Valued functions
Algebra of functions
Polynomial functions
Rational functions
Trigonometric functions
Logarithmic and exponential functions
Inverse functions
Graphs of simple functions
Limits, continuity and differentiability
Differentiation or the sum, difference
Product and quotient of two functions
Differentiation of trigonometric, inverse trigonometric, logarithmic, exponential, composite and implicit functions
Derivatives of order up to two
Rolle's and Lagrange's mean value theorems
Applications of derivatives
Rate of change of quantities
Monotonic - increasing and decreasing functions
Maxima and minima of functions of one variable
Tangents and normals
Integrals calculus Integral as an anti -derivative
Fundamental integrals involving algebraic, trigonometric , exponential and logarithmic functions
Integration by substitution, by parts and by partial fractions
Integration using trigonometric identities
Integral as limit or a sum
Fundamental theorem of calculus
Properties of definite integrals
Evaluation of definite integrals
Determining areas of the regions bounded by simple curves in standard form
Differential Equations Ordinary differential equations and their order and degree
Formation of differential equations
Solution of differential equations by the method of separations of variables
Solution of differential equations by the method of separations of variables,solution of homogeneous and linear differential equations of the type : dy/dx+p(x)y=q(x)
Co-ordinate geometry Cartesian system of rectangular co-ordinates 10 in a plane
Distance formula
Section formula
Locus and its equation
Translation of axes
Slope of a line
Parallel and perpendicular lines
Intercepts of a line on the coordinate axes
Various forms of equations of a straight line
Intersection of lines
Angles between two lines
Conditions for concurrence of three lines
Distance of a point from a line
Equations of internal and external bisectors of angles between two lines
Coordinates of centroid
Orthocentre and circumcentre of a triangle
Equation of family of lines passing through the point of intersection of two lines
Standard form of equation of a circle
General form of the equation of a circle, its radius and centre
Equation of a circle when the end points of a diameter are given
Points of intersection of a line and a circle with the centre at the origin and condition for a line to be tangent to a circle
Equation of the tangent
Sections of cones
Equation of conic sections in standard forms
Condition for y = mx + c to be a tangent and point (s) of tangency
Three-dimensional geometry Coordinates of a point in space
Distance between two points
Section formula
Direction ratios and direction cosines
Angle between two intersecting lines
Skew lines and the shortest distance between them and its equation
Equations of a line and a plane in different forms
Intersection of a line and a plane
Coplanar lines
Vector algebra Vectors and scalars
Addition of vectors
Components of a vector in two dimensions and three dimensional space
Scalar and vector products
Scalar and vector triple product
Statistics and probability Measures of dispersion
Calculation of mean and median
Mode of grouped and ungrouped data calculation of standard deviation
Variance and mean deviation for grouped and ungrouped data
Probability of an event
Addition and multiplication theorems of probability
Baye's theorem
Probability distribution of a random variate
Bernoulli trials and binomial distribution
Trigonometry Trigonometrical identities and equations, trigonometrical functions
Inverse trigonometrical functions and their properties
Heights and distances
Mathematical reasoning Statements
Logical operations and, or, implies, implied by, if and only if
Understanding of tautology
Contradiction
Converse and contrapositive
Physics
Physics and measurements Physics
Technology and society
S I units
Fundamental and derived units
Least count
Accuracy and precision of measuring instruments
Errors in measurement
Dimensions of physical quantities
Dimensional analysis and its applications
Kinematics Frame of reference
Motion in a straight line
Position-time graph
Speed and velocity
Uniform and non-uniform motion
Average speed and instantaneous velocity uniformly accelerated motion
Velocity-time graph
Position-time graphs
Relations for uniformly accelerated motion
Scalars and vectors
Vector addition and subtraction
Zero vector
Scalar and vector products
Unit vector
Resolution of a vector
Relative velocity
Motion in a plane
Projectile motion
Uniform circular motion
Laws of motion Force and inertia
Newton's first law of motion
Momentum
Newton's second law of motion
Impulse
Newton's third law or motion
Law of conservation of linear momentum and its applications
Equilibrium of concurrent forces
Static and kinetic friction
Laws of friction
Rolling friction
Dynamics of uniform circular motion
Centripetal force and Its applications
Work, energy and power Work done by a constant force and a variable force
Kinetic and potential energies
Work energy theorem
Power
Potential energy of a spring
Conservation of mechanical energy
Conservative and non-conservative forces
Elastic and inelastic collisions in one and two dimensions
Rotational motion Centre of mass or a two-particle system
Centre of mass of a rigid body
Basic concepts of rotational motions
Moment of a force
Torque
Angular momentum
Conservation of angular momentum and its applications
Moment of inertia
Radius of gyration
Values of moments of inertia for simple geometrical objects
Parallel and perpendicular axes theorems and their applications
Rigid body rotation
Equations of rotational motion
Gravitation The universal law of gravitation
Acceleration due to gravity and its variation with altitude and depth
Kepler's laws of planetary motion
Gravitational potential energy
Gravitational potential
Escape velocity
Orbital velocity of a satellite
Geo-stationary satellites
Properties of solids and liquids Elastic behaviour
Stress-strain relationship
Hooke's law
Young's modulus
Bulk modulus
Modulus of rigidity
Pressure due to a fluid column
Pascal's law and its applications.
Viscosity
Stokes' law
Terminal velocity
Streamline and turbulent flow
Reynolds number
Bernoulli's principle and its applications
Surface energy and surface tension
Angle of contact
Application of surface tension
Drops, bubbles and capillary rise
Heat
Temperature
Thermal expansion
Specific heat capacity
Calorimetry
Change or state
Latent heat
Heat transfer-conduction
Convection and radiation
Newton's law of cooling
Thermodynamics Thermal equilibrium
Zeroth law of thermodynamics
Concept of temperature
Heat, work and internal energy
First law of thermodynamics
Second law of thermodynamics
Reversible and irreversible processes
Carnot engine and its efficiency
Kinetics theory of gases Equation of state of a perfect gas, work done on compressing a gas
Kinetic theory of gases - assumptions
Concept of pressure
Kinetic energy and temperature
RMS speed of gas molecules
Degrees of freedom
Law of equipartition of energy
Applications to specific heat capacities of gases
Mean free path
Avogadro's number
Oscillations and waves Periodic motion-period
Frequency
Displacement as a function of time
Periodic functions
Simple harmonic motion and its equation
Phase
Oscillations of a spring
Restoring force and force constant
Energy in S.H.M
Kinetic and potential energies
Simple pendulum
Derivation or expression for its time period
Free, forced and damped oscillations
Resonance
Wave motion, phase, amplitude and velocity of wave
Longitudinal and transverse waves
Speed of a wave
Displacement relation for a progressive wave
Principle of superposition of waves
Reflection of waves
Standing waves in strings and organ pipes
Beats
Doppler effect in sound
Electrostatics Electric charges
Conservation of charge
Coulomb's law-forces between two point charges
Forces between multiple charges
Superposition principle and continuous charge distribution
Electric field
Electric field due to a point charge
Electric field lines
Electric dipole
Electric field due to a dipole
Torque on a dipole in uniform electric field
Electric flux
Gauss's law and its applications to find field due to infinitely long uniformly charged straight wire
Uniformly charged infinite plane sheet and uniformly charged thin spherical shell
Electric potential and its calculation for a point charge
Electric dipole and system or charges
Equipotential surfaces
Electrical potential energy of a system of two point charges in an electrostatics field
Conductors and insulators
Dielectrics and electric polarization
Capacitor
Combination of capacitors in series and in parallel
Capacitance or a parallel plate capacitor with and without dielectric medium between the plates
Energy stored in a capacitator
Current electricity Electric current
Drift velocity
Ohm's law
Electrical resistance
Resistances of different materials
V-I characteristics of ohmic and non ohmic conductors
Electrical energy and power
Electrical resistivity
Colour code for resistors
Series and parallel combinations of resistors
Temperature dependence of resistance
Electric Cell and its Internal resistance
Potential difference and EMF of a cell
Combination of cells in series and in parallel
Kirchhoff's laws and their applications
Wheatstone bridge
Metre bridge
Potentiometer and its principle and its applications
Magnetic effects of current and magnetism Biot - Savart law and its application to current carrying circular loop
Ampere's law and its applications to infinitely long current carrying straight wire and solenoid
Force on a moving charge in uniform magnetic and electric fields
Cyclotron
Force on a current-carrying conductor in a uniform magnetic field
Force between two parallel current carrying conductors
Definition of ampere
Torque experienced by a current loop in uniform magnetic field
Moving coil galvanometer and its current sensitivity and conversion to ammeter and voltmeter
Current loop as a magnetic dipole and its magnetic dipole moment
Bar magnet as an equivalent solenoid
Magnetic field lines
Earth's magnetic field and magnetic elements
Para, dia and ferro magnetic substance
Magnetic susceptibility and permeability
Hysteresis
Electromagnets and permanent magnets
Electromagnetic induction and alternating currents Electromagnetic induction
Faraday's law
Induced EMF and current
Lenz's law
Eddy currents
Self and mutual inductance
Alternating currents
Peak and RMS value of alternating current/voltage
Reactance and impedance
LCR series circuit
Resonance
Quality factor
Power in AC circuits
Wattless current
AC generator and transformer
Optics Reflection and refraction of light at plane and spherical surfaces
Mirror formula
Total internal reflection and its applications
Deviation and dispersion of light by a prism
Lens formula
Magnification
Power of a lens
Combination of thin lenses in contact
Microscope and astronomical telescope and their magnifying powers
Wave optics
Wavefront and Huygens principle
Laws of reflection and refraction using Huygens principle
Interference
Young's double slit experiment and expression for fringe width
Coherent sources and sustained interference of light
Diffraction due to a single slit
Width of central maximum
Resolving power of microscopes and astronomical telescopes
Polansation
Plane polarized light
Brewster's law
Uses of plane polarized light and polaroids
Dual nature of matter and radiation Dual nature of radiation
Photoelectric effect
Hertz and Lenard's observations
Einstein's photoelectric equation
Particle nature of light
Matter waves-wave nature of particle and Broglie relation
Davisson-Germer experiment
Atoms and nuclei Alpha-particle scattering experiment
Rutherford's model of atom
Bohr model
Energy levels
Hydrogen spectrum
Composition and size of nucleus
Atomic masses
Isotopes
Isobars
Isotones
Radioactivity
Alpha. beta and gamma particles/rays and their properties
Radioactive decay law
Mass-energy relation, mass defect, binding energy per nucleon, Its variation with mass number
Mass defect
Binding energy per nucleon and its variation with mass number
Nuclear fission and fusion
Electronic devices Semiconductors: Semiconductor diode
1-V characteristics in forward and reverse bias
Diode as a rectifier
I-V characteristics or LED
Photodiode
Solar cell and Zener diode
Zener diode as a voltage regulator
Junction transistor
Transistor action
Characteristics or a transistor
Transistor as an amplifier and oscillator
Logic gates or, and, not, nand and nor
Transistor as a switch
Communications system Propagation of electromagnetic waves in the atmosphere
Sky and space wave propagation
Need for modulation
Amplitude and frequency modulation
Bandwidth of signals
Bandwidth of transmission medium
Basic elements of a communication system
Experimental skills Familiarity with the basic approach and observations of the experiments and activities
Vernier callipers and its use to measure internal and external diameter and depth of a vessel
Screw gauge and its use to determine thickness/diameter of thin sheet/wire
Simple pendulum-dissipation of energy by plotting a graph between square of amplitude and time
Meter scale and mass or a given object by principle of moments
Young's modulus of elasticity of the material of a metallic wire
Surface tension of water by capillary rise and effect of detergents
Co-efficient or viscosity of a given viscous liquid by measuring terminal velocity of a given spherical body
Plotting a cooling curve for the relationship between the temperature of a hot body and time
Speed of sound in air at room temperature using a resonance tube
Specific heat capacity of a given solid and liquid by method of mixtures
Resistivity of the material of a given wire using metre bridge
Resistance of a given wire using Ohm's law
Potentiometer
Comparison or EMF of two primary cells
Determination of internal resistance of a cell
Resistance and figure of merit of a galvanometer by half deflection method
Focal length of
Convex mirror
Concave mirror
Convex Iens using parallax method
Plot of angle of deviation vs angle of incidence for a triangular prism
Refractive index of a glass slab using a travelling microscope
Characteristic curves of a p-n junction diode in forward and reverse bias
Characteristic curves of a Zener diode and finding reverse break down voltage
Characteristic curves of a transistor and finding current gain and voltage gain
Identification of diode, LED, transistor, IC, resistor, capacitor from mixed collection of such items
Using multimeter to: i) Identify base of a transistor, ii) distinguish between NPN and PNP type transistor, iii) See the unidirectional flow of current in case of a diode and an LED, iv) Check the correctness or otherwise of a given electronic component
Chemistry
Some basic concepts in chemistry Matter and its nature
Dalton's atomic theory
Concept of atom, molecule, element and compound
Physical quantities and their measurements in chemistry
Precision and accuracy
Significant figures
S.I Units
Dimensional analysis
Laws of chemical combination
Atomic and molecular masses
Mole concept
Molar mass
Percentage composition
Empirical and molecular formulae
Chemical equations and stoichiometry
States of matter Gaseous state
Measurable properties of gases
Gas laws-Boyles Iaw,Charles law,Graham's law of diffusion,Avogadro's law and Dalton's law of partial pressure
Concept of absolute scale of temperature
Ideal gas equation
Kinetic theory of gases, average, root mean square and most probable velocities and their relation with temperature
Concept of average, root mean square and most probable velocities
Real gases
Deviation from ideal behaviour
Compressibility factor and Van der Waals equation
Liquid State
Properties of liquids
Vapour pressure
Viscosity and surface tension and effect of temperature on them
Solid state: Classification of solids
Molecular, ionic, covalent and metallic solids
Elementary idea of amorphous and crystalline solids
Bragg's law and its applications
Unit cell and lattices
Packing in solids
Voids
Calculations involving unit cell parameters
Imperfection in solids
Electrical and magnetic properties
Atomic structure Thomson and Rutherford atomic models and their limitations
Nature of electromagnetic radiation
Photoelectric effect
Spectrum of hydrogen atom and its postulates
Bohr model of hydrogen atom and its postulates
Derivation of the relations for energy of the electron and radii of the different orbits
Limitations of Bohr's model
Dual nature of matter
De-Broglie's relationship
Heisenberg uncertainty principle
Elementary ideas of quantum mechanics
Quantum mechanical model of atom and its important features
Concept of atomic orbitals as one electron wave functions
Lectron wave functions: variation of Ѱand Ѱ² with r for Is and 2s orbitals: various quantum numbers
Shapes of s, p and d orbitals
Electron spin and spin quantum number
Rules for filling electrons in orbitals
Aufbau principle
Pauli's exclusion principle and Hund's rule
Electronic configuration of elements
Extra stability of half-filled and completely filled orbitals
Chemical bonding and molecular structure Kossel - lewis approach to chemical bond formation
Concept of ionic and covalent bonds
Ionic bonding and formation of ionic bonds
Factors affecting the formation of ionic bonds
Calculation of lattice enthalpy
Covalent bonding
Concept of electronegativity
Fajan's rule
Dipole moment
Valence shell electron pair repulsion theory and shapes of simple molecules
Quantum mechanical approach to covalent bonding
Valence bond theory and its important features
Resonance
Molecular orbital theory and its important features
LCAOS
Types of molecular orbitals
Sigma and pi-bonds
Molecular orbital electronic configurations of homo nuclear diatomic molecules
Concept of bond order
Bond length and bond energy
Elementary idea of metallic bonding
Hydrogen bonding and its applications
Chemical thermodynamics Fundamentals of thermodynamics
System and surroundings
Extensive and intensive properties
State functions
Types of processes
First law or thermodynamics
Concept of work, heat, internal energy and enthalpy
Heat capacity and molar heat capacity
Hess's law of constant heat summation
Enthalpies of bond dissociation
Combustion
Formation
Atomization
Sublimation
Phase transition
Hydration
Ionization and solution
Second law of thermodynamics
Spontaneity of processes
∆S of the universe and ∆G of the system as criteria for spontaneity
Standard Gibbs energy change and equilibrium constant
Solutions Different methods for expressing concentration of solution
Molality, molarity, mole fraction, percentage, vapour pressure of solutions and Raoult's law
Ideal and non-ideal solutions
Composition of vapour pressure
Plots for ideal and non-ideal solutions
Colligative properties of dilute solutions
Relative lowering of vapour pressure
Depression of freezing point
Elevation of boiling point and osmotic pressure
Determination of molecular mass using colligative properties
Abnormal value of molar mass
Van't Hoff factor and its significance
Equilibrium Meaning of equilibrium
Concept of dynamic equilibrium
Equilibria involving physical processes
Solid -liquid, liquid - gas and solid - gas equilibria
Henry's law
General characteristics of equilibrium involving physical processes
Equilibria involving chemical processes
Law of chemical equilibrium
Equilibrium constants and their significance
Significance of ∆G and ∆G' in chemical equilibria
Factors affecting equilibrium concentration, pressure and temperature
Effect of catalyst
Le Chatelier's principle
Ionic equilibrium
Weak and strong electrolytes
Ionization of electrolytes
Various concepts of acids and bases and their ionization
Acid - base equilibria and ionization constants
Ionization of water
Ph scale
Common ion effect
Hydrolysis of salts and pH of their solutions
Solubility of sparingly soluble salts and solubility products
Buffer solutions
Redox reactions and electrochemistry Electronic concepts of oxidation and reduction
Redox reactions
Oxidation number
Rules for assigning oxidation number
Balancing of redox reactions
Electrolytic and metallic conduction
Conductance in electrolytic solutions
Molar conductivities and their variation with concentration
Kohlrausch's law and its applications
Electrochemical cells
Electrolytic and galvanic cells
Different types of electrodes
Electrode potentials including standard electrode potential
Half-cell and cell reactions
EMF of a galvanic cell and its measurement
Nernst equation and its applications
Relationship between cell potential and Gibbs' energy change
Dry cell and lead accumulator
Fuel cells
Chemical kinetics Rate of a chemical reaction
Factors affecting the rate of reactions
Concentration, temperature, pressure and catalyst
Elementary and complex reactions
Order and molecularity of reactions
Rate law
Rate constant and its units
Elementary and complex reactions,order and molecularity of reactions,rate law,rate constant and its units,differential and integral forms of zero and first order reactions and their characteristics,rate of a chemical reaction
Factors affecting the rate of reactions,concentration, temperature, pressure and catalyst,effect of temperature on rate of reactions
Arrhenius theory
Activation energy and its calculation
Collision theory of bimolecular gaseous reactions
Surface chemistry Adsorption
Physisorption and chemisorption and their characteristics
Factors affecting adsorption of gases on solids
Freundlich and Langmuir adsorption isotherms
Adsorption from solutions
Catalysis
Homogeneous and heterogeneous
Activity and selectivity of solid catalysts
Enzyme catalysis and its mechanism
Colloidal state
Distinction among true solutions
Colloids and suspensions
Classification of colloids
Lyophilic and lyophobic
Multi molecular
Macromolecular and associated colloids
Preparation and properties of colloids
Tyndall effect
Brownian movement
Electrophoresis
Dialysis
Coagulation and flocculation
Emulsions and their characteristics
Classification of elements and periodicity in properties Modern periodic law and present form of the periodic table, s, p, d and f block elements
Periodic trends in properties of elements atomic and ionic radii
Ionization enthalpy
Electron gain enthalpy
Valence
Oxidation states and chemical reactivity
General principles and process of Isolation of metals Mode of occurrence of elements in nature
Minerals
Ores
Steps involved in the extraction or metals
Concentration
Reduction and refining with special reference to the extraction of Al, Cu, Zn and Fe
Thermodynamic and electrochemical principles involved in the extraction of metals
Hydrogen Position of hydrogen in periodic table
Isotopes
Preparation, properties and uses of hydrogen
Physical and chemical properties of water and heavy water
Structure and preparation of hydrogen peroxide
Reactions and uses of hydrogen peroxide
Classification of hydrides
Classification of ionic, covalent and interstitial
Hydrogen as a fuel
S - block elements - alkali and alkaline earth metals General introduction of group 1 and 2 Elements
Electronic configuration and general trends in physical and chemical properties of elements
Anomalous properties of the first element of each group
Diagonal relationships
Preparation & properties of some important compounds
Sodium carbonate and sodium hydroxide and sodium hydrogen carbonate
Industrial uses of lime, limestone plaster of Paris and cement
Biological significance of Na, K, Mg and Ca
P - block elements General Introduction of Group 13 to 18 Elements
Electronic configuration and general trends in physical and chemical properties of elements across the periods and down the groups
Unique behaviour or the first element in each group
P - block elements - group 13 elements Preparation, properties and uses of boron and aluminium
Structure, properties and uses of borax, boric acid, diborane, boron trifluoride, aluminium chloride and alums
Structure, properties and uses of boric acid
Structure, properties and uses of diborane
Structure, properties and uses of boron trifluoride
Structure, properties and uses of aluminium chloride and alums
P - block elements - group 14 elements Tendency for catenation
Structure, properties and uses of allotropes and oxides of carbon, silicon tetrachloride, silicates. Zeolites and silicones
P - block elements - group 15 elements Properties and uses or nitrogen and phosphorus
Allotrophic forms of phosphorus
Preparation, properties, structure and uses of ammonia, nitric acid, phosphine and phosphorus halides
Structures of oxides and oxoacids of nitrogen and phosphorus
P - block elements - group 16 elements Preparation, properties, structures and uses of ozone
Allotropic forms or sulphur
Preparation, properties, structures and uses of sulphuric acid
Structures of oxoacids of sulphur
P - block elements - group 17 elements Preparation, properties and uses of hydrochloric acid
Trends in the acidic nature of hydrogen halides
Structures of interhalogen compounds and oxides and oxoacids of halogens
P - block elements - group 18 elements Occurrence and uses of noble gases
Structures of fluorides and oxides of xenon
D and F - block elements Transition elements
General introduction
Electronic configuration
Occurrence and characteristics
General trends in properties of the first row transition elements
Physical properties
Ionization enthalpy
Oxidation states
Atomic radii
Colour and catalytic behaviour
Magnetic properties
Complex formation
Interstitial compounds
Alloy formation
Preparation, properties and uses of K, Cr, O, and KMnO4
Inner Transition Elements
Electronic configuration of lanthanoids
Actinoids-Oxidation states and lanthanoid contraction
Electronic configuration and oxidation states of actinoids
Co-ordinations compound Introduction to co-ordination compounds
Werner's theory
Ligands
Co-ordination number
Denticity
Chelation
IUPAC nomenclature of mononuclear co-ordination compounds
Isomerism-Structural and stereoisomerism
Bonding
Valence bond approach and basic ideas of crystal field theory
Colour and magnetic properties
Importance of co-ordination compounds
Environmental chemistry Environmental pollution
Atmospheric, water and soil
Atmospheric pollution
Tropospheric and stratospheric
Tropospheric pollutants - Gaseous pollutants
Oxides of carbon, nitrogen and sulphur, hydrocarbons and their sources
Harmful effects and prevention
Greenhouse effect and global warming
Acid rain
Particulate pollutants-smoke, dust, smog. fumes, mist and their sources,harmful effects and prevention
Stratospheric pollution
Formation and breakdown of ozone
Depletion or ozone layer and its mechanism and effects
Water pollution
Major pollutants such as pathogens, organic wastes and chemical pollutants and their harmful effects and prevention
Soil pollution
Major pollutants such as pesticides their harmful effects and prevention
Strategies to control environmental pollution
Purification and characteristics of organic compounds Purification
Crystallization
Sublimation
Distillation
Differential extract ion and chromatography
Principles and their applications
Qualitative analysis
Detection of nitrogen, sulphur, phosphorus and halogens
Quantitative analysis
Estimation of carbon, hydrogen, nitrogen, halogens, sulphur and phosphorus
Calculations or empirical formulae and molecular formulae
Numerical problems in organic quantitative analysis
Some basic principles of organic chemistry Tetra valency of carbon
Shapes of simple molecules
Hybridization of S and P
Classification of organic compounds based on functional groups and those containing halogens, oxygen, nitrogen and sulphur
Homologous series
Isomerism-Structural and stereoisomerism
Nomenclature of trivial and IUPAC
Covalent bond fission
Homolytic and heterolytic
Free radicals
Carbocations and carbanions
Stability of carbocations and free radicals, electrophiles and nucleophiles
Electronic displacement in a covalent bond
Inductive effect
Electrometric effect
Resonance and hyper conjugation
Common types of organic reactions
Substitution, addition, elimination and rearrangement
Hydrocarbons Classification
Isomerism-Structural and stereoisomerism
IUPAC nomenclature
General methods of preparation, properties and reactions
Alkanes
Conformations
Sawhorse and Newman projections
Mechanism of halogenation of alkanes
Alkenes
Geometrical isomerism
Mechanism of electrophilic addition
Addition of hydrogen, halogens, water, hydrogen halides
Ozonolysis and polymerization
Alkynes
Acidic character
Addition of hydrogen, halogens, water and hydrogen halides
Polymerization
Aromatic hydrocarbons
Nomenclature
Benzene
Structure and aromaticity
Mechanism of electrophilic substitution
Halogenation
Nitration
Friedel-Craft's alkylation and acylation
Directive influence of functional group in mono-substituted benzene
Organic compounds containing halogens General methods of preparation, properties and reactions
Nature of C-X bond
Mechanisms of substitution reactions
Uses: Environmental effects of chloroform
Iodoform freons and DDT
Organic compounds containing oxygen General Methods of Preparation, Properties, Reactions and Uses
Alcohols Phenols and Esther
Identification of primary, secondary and tertiary alcohols
Mechanism of dehydration
Phenols
Acidic nature
Electrophilic substitution reactions, halogenation, nitration, sulphonation, Friedel-Crafts alkylation and acylation
Halogenation, nitration and sulphonation
Reimer-Tiemann reaction
Ethers
Aldehyde and ketones
Nature of carbonyl group
Nucleophilic addition to >C=O group
Relative reactivities of aldehydes and ketones
Important reactions such as nucleophilic addition reactions
Grignard reagent
Oxidation
Reduction
Acidity of α-hydrogen
Aldol condensation
Cannizzaro reaction
Haloform reaction
Chemical tests to distinguish between aldehydes and ketones
Carboxylic acids: formation of esters, acid chlorides and amides, ester hydrolysis
Acidic strength and factors affecting it
Organic compounds containing nitrogen General methods of preparation, properties, reactions and uses.
Amines:Nomenclature,classification,structure,basic character and identification of primary, secondary and tertiary amines and their basic character
Diazonium salts
Importance in synthetic organic chemistry
Polymers General introduction and classification of polymers
General methods of polymerization, addition and condensation
Copolymerization
Natural and synthetic rubber and vulcanization
Some important polymers with emphasis on their monomers and uses
Polythene, nylon, polyester and Bakelite
Biomolecules General introduction and importance or biomolecules
Classification of carbohydrates
Aldoses and ketoses
Monosaccharides and constituent monosaccharides of oligosaccharides
Proteins
Elementary Idea of α-amino acids, peptide bond, polypeptides
Primary, secondary, tertiary and quaternary structure of proteins
Denaturation of proteins and enzymes
Classification and functions of vitamins
Nucleic acid
Chemical constitution of DNA and RNA
Biological functions of nucleic acids
Chemistry in everyday life Chemicals in medicines-Analgesies,tranquilizers,antiseptics,disinfectants,antimicrobials,antifertility drugs,antibiotics,antacids,antihistamins-their meaning and common examples
Chemicals in food-Preservatives,artificial sweatening agents-common examples, Cleansing agents - -Soaps and detergents,cleansing action
Principles related to practical chemistry Detection of extra elements in organic compounds
Detection of the functional groups
Alcoholic and phenolic
Aldehyde and ketone
Carboxyl and amino groups in organic compound
Chemistry involved in the preparation or the following: Inorganic compounds: Mohr's salt,potash alum; Organic compounds:Acetanilide,P nitroacetanilide,aniline yellow,iodoform
Chemistry involved in the titrimetric exercise
Acids, bases and the use of indicators
Oxalic-acid vs mohr's salt vs KMnO4
Chemical principles involved in the qualitative salt analysis
Cations
Anions
Chemical principles involved in the experiments
Enthalpy of solution of CuSO4
Enthalpy or neutralization of strong acid and strong base
Preparation of lyophilic and lyophobic sols
Kinetic study or reaction of iodide with hydrogen peroxide at room temperature

JEE Main Paper 2 Syllabus

Drawing
Awareness of person, place, building and materials Objects
Texture related to architecture and build-environment
Visualising three dimensional objects from two dimensional drawings
Visualising different sides or three dimensional objects
Analytical reasoning mental ability (visual,numerical and verbal)
Three-dimensional Perception: understanding and appreciation of scale and proportion of objects,building forms and elements,colour texture,harmony and contrast
Design and drawing or geometrical or abstract shapes and patterns in pencil
Transformation of forms both 2D and 3D union
Subtraction, rotation and development or surfaces and volumes
Generation of plan
Elevations and 3D views of objects
Creating two dimensional and three dimensional compositions using given shapes and forms
Sketching of scenes and activities from memory of urbanscape (public space,market,festivals,street scenes,monuments,recreational spaces etc.)
Landscape(river fronts,jungles,gardens,trees,plants etc.) and rural life
ddddd

JEE Main 2020 preparation tips specify the steps to be followed by students wishing to crack the exam and taste success in it. Some of the preparation tips suggested by experts and toppers are

  • Use the syllabus and study all topics thoroughly
  • Understand and know the exam pattern well
  • Prepare a study plan and adhere to it well
  • Check and refer important books and topics recommended by experts and toppers
  • Prepare short notes while studying to use as reference at the last minute
  • Practice well by solving previous year sample papers
  • Revise and analyze after each test
  • Attempt JEE Main 2020 mock test to feel actual exam environment
  • Revise regularly to avoid missing or forgetting any topic
  • Go for small breaks to avoid monotony and tiredness
  • Stay positive and be confident; avoid comparisons with others
  • Keep healthy and fit

Important Topics to keep in mind during JEE Main preparation

Chapters in Physics with weightage 

Topics% of questions asked
Gravitation 2
Work Energy and Power 3
Rotational Motion 3
Kinetic theory of Gases 3
Electromagnetic Induction and Alternating currents 3
Experimental skills 3
Kinematics 3
Laws of motion 3
Oscillations and Waves 3
Atoms And Nuclei 3
Physics and Measurement 4
Properties of Solids and Liquids 5
Magnetic Effects of Current and Magnetism  5
Electromagnetic Waves 5
Communication Systems 5
Dual Nature of Matter and Radiation 6
Current Electricity 8
Thermodynamics9
Electrostatics9
Optics 10
Electronic devices 14


Chapters in Mathematics with weightage  

Topics% of questions asked
Binomial theorem and its simple applications 2
Differential equations 3
Mathematical Induction 3
Mathematical reasoning 3
Permutations and combinations 4
Trigonometry 4
Sequence and series 5
Sets, Relations and Functions 5
Vector Algebra 5
Three Dimensional Geometry 6
Complex numbers and quadratic equations 7
Matrices and Determinants 7
Statistics and Probability 8
Integral Calculus 9
Limit , continuity and differentiability 10
Co-ordinate geometry15


Chapters in Chemistry with weightage 

 

Topics% of questions asked
Some basic concepts in chemistry 5
States of matter 3
Atomic Structure 3
Solutions 5
Chemical Thermodynamics 4
Equilibrium 6
Redox Reaction and Electrochemistry 4
Chemical kinetics 3
Surface Chemistry 1
General Principle and process of Isolation of metals 2
Classification of Elements and Periodic table 3
Hydrogen 3
p- Block Elements5
S - Block Elements (Alkali and Alkaline Earth Metals) 1
Chemical Bonding and Molecular Structure 5
d - and f - BLOCK ELEMENTS 4
Co-ordination Compounds 4
Environmental Chemistry 3
Purification and Characterisation of Organic Compounds 3
Some Basic Principles of Organic Chemistry 3
Hydrocarbons 3
Organic Compounds containing Halogens 2
Organic Compounds containing Oxygen 6
Organic Compounds Containing Nitrogen 1
Polymers 3
Biomolecules 3
Chemistry in Everyday Life 4
Principles Related to Practical Chemistry 3


Success Mantras of JEE Main Toppers:

Some of the JEE Main 2019 Topper interviews have been listed below to allow students to read about the success mantras of the students who have managed to beat all competition and crack the exam to reach the top in 2019.

Name of Topper
Interview link

Dhruv Arora 

Read Full Interview

Jayesh Singla 

Read Full Interview

Konda Renu

Read Full Interview

Sambit Behera - 

Read Full Interview

Ankit Kumar Misra- 

Read Full Interview

Bojja Chetan Reddy

Read Full Interview

Samiksha Das

Read Interview

JEE Main 2020 Exam Pattern

JEE Main Paper 1 Exam Pattern

JEE Main 2020 Exam Pattern for Paper 1- NTA has detailed the exam pattern of JEE Main Paper 1 which is for the B.Tech aspirants. Familiarity with exam pattern is a mandatory factor in preparation as the exam is the toughest with more than 12 lakh students appearing for it. The JEE Main exam pattern for Paper 1 specifies the types of questions expected, number of questions, duration of exam, marking scheme and language of test etc. The details of the exam pattern of JEE Main Paper 1 are given below

JEE Main Exam Pattern (Paper 1)


Mode of Examination
Computer-Based Test
Examination Duration
3 hours
No of shifts
Paper-2 will also be held in two shifts per day
(9:30 am to 12:30 pm and 2:30 pm to 5:30 pm)
Subjects
Physics, Chemistry and Mathematics
Type of Questions
Multiple Choice Questions (MCQs) and Numerical questions
Difficulty levels of questions
Class 11 and Class 12
Language
English/ Hindi.
Gujarati allowed for students from Gujarat, Damn & Diu only
Subject wise distribution of Questions, Total Number of Questions and Marks

SubjectNo of Questions Marks
Part 1 - Mathematics 20 MCQs +5 NQs
100
Part 2 - Physics20 MCQs +5 NQs
100
Part 3 - Chemistry20 MCQs +5 NQs
100
Total
75
300 (Tentative)
Marking Scheme   Correct Answer  Four mark (+4) 
Incorrect Answer/Multiple AnswerMinus one mark (-1) 
Unanswered  No mark (0)

* MCQs- Multiple Choice Questions
*NQs - Numerical Questions

JEE Main Paper 2 Exam Pattern

JEE Main 2020 Exam Pattern for Paper 2- Aspiring architects appearing for Paper 2 of JEE Main Paper must know the exam pattern well if they wish to crack the exam. The JEE Main exam pattern (Paper 2) has aptitude and mathematics in addition to drawing therefore its partly a computer based test and partly a pend and paper one. Exam Pattern of JEE Main Paper 2 details the types and number of questions asked, exam duration, marking methodology etc. Candidates can check the Paper 2 JEE Main exam pattern 2020 below.

 JEE Main 2020 Exam Pattern (Paper 2) for B.Arch

Mode of examComputer based
Duration of exam3 hours
LanguageEnglish/ Hindi. Gujarati allowed for students from Gujarat, Damn & Diu only
Number of shiftsPaper-2 will also be held in two shifts per day
(9:30 am to 12:30 pm and 2:30 pm to 5:30 pm)
Type of QuestionsMultiple choice questions (MCQs) and Numerical Questions ( only for Maths)
Subject wise distribution of Questions, Total Number of Questions and MarksSubject No of Questions Marks
Part 1 - Mathematics 20 MCQs + 5 Numerical
100
Part 2 - Aptitude50 MCQs
200
Part 3 - Drawing2100
Total (tentative)
77
400
Marking Scheme for MCQs Mathematics-Part I                         Aptitude Test-Part II  Correct Answer  Four mark (+4) 
Incorrect Answer/Multiple AnswerMinus one mark (-1) 
Unanswered  No mark (0)
Drawing Test –Part IIITwo questions to be evaluated out of 100 marks
Difficulty levels of questionsMaths and Aptitude - Class 11 and Class 12  standard


JEE Main 2020 Exam Pattern (Paper 2) for B.Plan

Parameters

Particulars

Exam Mode

Computer-based test (CBT)

Exam Duration

3 hours

Subjects

Mathematics, General Aptitude and Planning

Total number and type of questions

Maths - 20 MCQ questions and 5 numerical questions

Aptitude - 50 MCQs 

Planning - 25 questions.

Marking Scheme

4 marks for a correct answer

-1 for an incorrect answer

Maximum Marks

400

Medium of paper

English or Hindi (Candidates from Gujarat, Daman & Diu and Dadra and Nagar Haveli can opt for Gujarati as well)


NTA has released JEE Main 2020 mock test from August 10 in online mode. Candidates can attempt JEE Main 2020 mock test using the link given on the JEE Main website or even NTA website. Candidates can access the mock test of JEE Main 2020 without the need for login credentials. Mock tests will be available for all both Paper I and Paper II. However, in case of Paper II, mock test for drawing section is not available. 

In addition, NTA has also started the registrations for offline mock tests too. Candidates can go to NTA website and use the download mock test link given there. After ownloading the mock test, candidates can practice the given questions in offline mode. 

Attempting mock test will enable candidates to be familiar with the exam pattern, examination mode, and importantly they will be able to analyze their preparation. Apart from this, attempting mock test will enable candidates to learn time management which plays a crucial part in the entrance exam.

The exam conducting authority has setup a countrywide network of Test Practice Centres (TPCs) for students of rural/urban areas. Accordingly to the officials, 2,697 TPCs have been established in various schools and engineering colleges with computer centres. To avail this facility, candidates will have to do online registration and visit these TPCs as per the slot allotted to them. The TPCs have a downloaded Computer Based Test (CBT) which is similar to the actual JEE Main 2020 exam. Also, authorities have developed an app which enables candidates to choose the nearest JEE Main mock test centres.


JEE Main Admit Card 2020 will be released by NTA from December 6 for the January exam while it can be downloaded from March 16 for the April session. Candidates will have to login using their application number, date of birth or password to download their admit card. Details like name, exam centre address, admit card number, roll number, timing of examination, paper appearing for, gender and more will be displayed on the admit card of JEE Main 2020. 

How to download the JEE Main 2020 admit card?

Candidates can download the JEE  Main admit card by two methods:

  • Using their Application Number and Password
  • Using their  Application Number and Date of Birth

However, before downloading the admit card candidates must check all the information furnished on it.  JEE Main 2020 admit card is an important identity document. Without admit card of JEE Main 2020 candidates will not be allowed to enter the examination hall. 

What to carry to the exam hall along with the admit card?

  • A valid photo id proof (College/ School ID Card, Driving License, Passport) to the exam centre.
  • A passport size photograph (same as in application form)
  • PwD certificate if applicable

Details mentioned in Admit card of JEE Main 2020

  • Name of Candidate
  • Father's Name
  • Date of Birth
  • Gender
  • Category
  • State of Eligibility
  • Roll Number
  • Paper for which appearing
  • Application Number
  • Exam Centre Name
  • Exam Centre Address
  • Date of Exam
  • Timing of Exam (Shift)
  • Photograph of Candidate
  • Signature of Candidate
  • Candidate's parent signature

Unable to download the Admit Card?

Candidates who are unable to download their admit card must call the helpline numbers from 10 am to 5 pm OR send an email to [email protected] giving their application number and also the confirmation page.

JEE Main 2020 Exam Centers

State City
Andaman and Nicobar Islands Port Blair
Andhra Pradesh Chittoor
Anantapur
Eluru
Guntur
Kurnool
Kakinada
Nellore
Rajahmundry
Tirupati
Vijayawada
Visakhapatnam
Vizianagaram
Bhimavaram
Ongole
Srikakulam
Narasaraopet
Proddatur
Surampalem
Chirala
Kadapa
Assam Dibrugarh
Guwahati
Jorhat
Silchar
Tezpur
Bihar Bhagalpur
Gaya
Muzaffarpur
Patna
Purnea
Darbhanga
Arrah
Chandigarh Chandigarh
Chhattisgarh Bhilai
Bilaspur
Raipur
Durg
Daman and Diu Daman
Diu
Delhi Delhi
Goa Panaji
Margao
Gujarat Ahmedabad
Anand
Bhavnagar
Jamnagar
Rajkot
Surat
Vadodara
Valsad
Junagadh
Himatnagar
Gandhinagar
Mehsana
Haryana Ambala
Faridabad
Gurugram
Hisar
Karnal
Kurukshetra
Panipat
Sonipat
Yamuna Nagar
Himachal Pradesh Shimla
Solan
Hamirpur
Mandi
Una
Kullu
Bilaspur
Kangra
Palampur
Jammu and Kashmir Baramulla
Jammu
Srinagar
Leh
Samba
Jharkhand Dhanbad
Jamshedpur
Ranchi
Bokaro Steel City
Hazaribagh
Karnataka Bellary
Bidar
Hassan
Udupi
Belgaum
Bengaluru
Gulbarga
Hubballi
Mangaluru
Mysore
Shivamogga
Tumkur
Dharwad
Manipal
Davanagere
Mandya
Kerala Alappuzha
Ernakulam
Kannur
Kollam
Kottayam
Kozhikode
Malappuram
Palakkad
Thiruvananthapuram
Thrissur
Idukki
Kasaragod
Pathanamthitta
Chengannur
Angamaly
Muvattupuzha
Madhya Pradesh Bhopal
Gwalior
Indore
Jabalpur
Rewa
Sagar
Satna
Ujjain
Balaghat
Betul
Chhindwara
Maharashtra Ahmednagar
Akola
Amravati
Aurangabad
Jalgaon
Kolhapur
Mumbai
Nagpur
Nanded
Nashik
Pune
Solapur
Thane
Chandrapur
Dhule
Latur
Raigad
Ratnagiri
Sangli
Satara
Wardha
Navi Mumbai
Manipur Imphal
Meghalaya Shillong
Mizoram Aizawl
Nagaland Dimapur
Kohima
Odisha Balasore
Berhampur
Bhubaneswar
Cuttack
Rourkela
Sambalpur
Ganjam
Dhenkanal
Puducherry Puducherry
Punjab Amritsar
Jalandhar
Ludhiana
Patiala
Sangrur
Fatehgarh Sahib
Pathankot
Bathinda
Mohali
Rajasthan Ajmer
Alwar
Bikaner
Jaipur
Jodhpur
Kota
Sikar
Udaipur
Sri Ganganagar
Sikkim Gangtok
Tamil Nadu Chennai
Coimbatore
Kanyakumari
Madurai
Namakkal
Salem
Tiruchirappalli
Tirunelveli
Cuddalore
Thanjavur
Thoothukudi
Vellore
Virudhunagar
Nagercoil
Kanchipuram
Tiruvallur
Telangana Hyderabad
Karimnagar
Khammam
Warangal
Mahabubnagar
Nalgonda
Secunderabad
K.V.Rangareddy
Tripura Agartala
Uttar Pradesh Agra
Aligarh
Allahabad
Bareilly
Ghaziabad
Gorakhpur
Greater Noida
Noida
Jhansi
Kanpur
Lucknow
Meerut
Mathura
Moradabad
Muzaffarnagar
Varanasi
Faizabad
Sitapur
Uttarakhand Dehradun
Haldwani
Haridwar
Pantnagar
Roorkee
Nainital
West Bengal Asansol
Durgapur
Hooghly
Howrah
Kalyani
Kolkata
Siliguri
Burdwan
Arunachal Pradesh Itanagar
Naharlagun
Dadra and Nagar Haveli Dadra and Nagar Haveli
Lakshadweep Kavaratti

Documents Required at Exam

  • JEE Main admit card
  • A valid photo ID (passport, college/school ID card, driving license)
  • One passport size photograph
  • PwD category candidates will have to carry a copy of the PwD certificate in the prescribed format.

NTA will release the JEE Main 2020 answer key for Paper 1 after January 11 when the exam concludes. The answer key of JEE Main 2020 will carry the correct responses of the questions asked during the examination. The authorities will release the provisional answer key along with the objection facility before publishing the final answer key along with the result on January 31.  The recorded responses of all candidates will be released through candidate login for candidates to cross verify their answers.  Candidates will be able to calculate their probable scores with the help of JEE Main 2020 answer key. The answer key will be released separately for Paper 1 and 2.

Candidates can raise an objection to any of the answers specified in the JEE Main answer key. To challenge the answer key, candidates will have to fill the online application form and pay the processing fees of Rs.1000 per question. Candidates must note that challenge of answer keys will also be in online mode. The result of JEE Main 2020 will be compiled on the basis of the final answer keys. 

1282 Colleges Accepting Admission
through JEE Main

Click here

JEE Main 2020 result will be announced in online mode by the authorities on January 31 for Paper 1 and Paper 2 whereas for the April session the result will be declared on April 30.  Candidates will have to login using the application number and date of birth. To ensure equivalence in the difficulty levels of all shifts, the prescribed NTA normalization procedure wll be put to use to arrive the normalized scored for each of the three subjects and the total score which will be announced in the result of JEE Main

The rank will not be announced in January as the better of the two scores will be considered while assigning the rank to the students. The result will depict the following details

  • Name of the candidate

  • Roll number

  • Date of birth

  • Name of the candidate’s parents

  • State code of eligibility

  • Category and Nationality

  • Subject-wise NTA scores

  • Total NTA scores obtained in first attempt

The final result of JEE Main will be declared on April 30 where the scores of both the attempts or a single attempt will be released along with the rank allotted on the better of the two scores. The final result of JEE Main 2020 Paper 1 and Paper 2 will be announced separately.

JEE Main 2020 Rank List:

NTA will not release a separate merit list for JEE Main 2020. The rank of JEE Main 2020 for both the attempts with details of candidates who have qualified for JEE Advanced 2020 will be mentioned in the result /score card. 

In case of a tie, inter-se-merit guidelines will be used as given below

For JEE  Main 2020 Paper 1 - Tie between candidates obtaining equal total NTA scores in Paper 1, will be resolved as follows:

  • NTA score in Mathematics
  • NTA score in Physics
  • NTA score in Chemistry
  • Candidates older in Age
  • If the resolution is not possible after this criterion, candidates will be given same rank

For JEE  Main 2020 Paper 2 - Tie between candidates obtaining equal total NTA scores in Paper 2 will be resolved as follows

  • NTA score obtained in Mathematics
  • NTA score obtained in Aptitude Test
  • NTA score obtained in Drawing Test
  • Candidates olderi n age
  • If the resolution is not possible after this criterion, candidates will be given same rank

JEE Main 2020 Cut off - The minimum rank that fetches a seat in the NITs, IIITs or the GFTIs is the cutoff for JEE Main. Since JEE Main is the screening test for JEE Advanced, NTA releases the qualifying cutoff in JEE Main to appear in JEE Advanced. The cutoff will be different for each category, branch and institute. 

To understand and know the qualifying JEE Main cutoff to appear in JEE Advanced, check the table below.

Cutoff Trends of JEE Main                                                                                                                                                    

S.No

Category

201920182017        2016        201520142013        
1        OBC-NCL74.3166557
4549        70        70        74        70        
2        SC54.0128155
29        32        52        50        53        50        
3        

General

89.75488497481        100        105        115        113        
4        ST        44.3345172
24        27        48         44        47        45        
5PwD0.11371730
------
6GEN-EWS78.2174869
------


Mode of Counselling: Online

JEE Main 2020 counselling will be through Joint Seat Allocation Authority ( JoSAA) which is the conducting body for the common counselling for both JEE Main and JEE Advanced. Candidates have to register for JEE Main counselling 2020 through JoSAA in online mode tentatively in June first week. The counselling and seat allotment for JEE Main will be based on candidate’s merit, availability of seats and choice of institute and courses. Counselling for JEE Main through JoSAA will consist of two mock rounds followed by seven rounds.

JEE Main Counselling (as per JoSAA):

  • Candidates need not pay any registration fee. 
  • Registration is only allowed once at the start of the counselling process and is closed just after the conclusion of the mock round allotments. 
  • Thereafter for every round after the allotment, candidates who are allotted seats must download the provisional seat allotment letter, pay the part seat acceptance fee and report to the nearest reporting centre as specified for verification of documents.
  • Next they must take the freeze option if they wish to keep the seat and not participate further; float option if they wish to upgrade in the next rounds and slide if they like the institute but wish to upgrade to a better branch within the same institute.

After the last round is completed, candidates mut report to the institutes to complete their admission formalities by paying the balance fee and submitting the requisite documents to the allotted institute.

Documents Required at Counselling

  • Provisional JoSAA seat allotment letter
  • JEE Main admit card
  • 3 passport size photographs (the same as uploaded during registration)
  • Photo identity card
  • Date of birth proof
  • Class XII mark sheet
  • JEE Main score card
  • Category certificate (if applicable)

General Information

Applications Open Now

Chandigarh Group of Colleges - CGC
Chandigarh Group of Colleges ...
Apply
Apeejay Stya University
Apeejay Stya University
Apply
View All Application Forms

Questions related to JEE Main

Showing 86180 out of 86181 Questions
7 Views

hello i want to give aeee. I am also applying for jee when i can apply it. Is its syllabus same as jee main.

Vishwaksen Gouda Student Expert 21st Sep, 2019
Hello tejinder
Join entrance examination is also also same as AIEEE
Almost all syllabus will be same for the both so you can apply for Jee main examination .AIEEE is ALL INDIA entrance examsENTRANCE EXAMINATION FOR ENGINEERING . so that you can apply for both the
Thank you
11 Views

I am a final year diploma in mechanical (DME) student. How can I apply for JEE MAIN 2020 examination. Is I am eligible or not?

_Abhishek_Vatsya Student Expert 21st Sep, 2019
Hey!There
Yes,you are elligible for JEE MAINS.You can apply..Since you are in diploma which is equivalent to class 12th board EXAMINATION.So you are elligible for JEE MAINS..
For more details go through below mention link:
https://www.google.com/url?sa=t&source=web&rct=j&url=https://engineering.careers360.com/articles/jee-main-eligibility-criteria/amp&ved=2ahUKEwiu5JbHpuLkAhVR8HMBHfk4CO4QFjACegQIDBAJ&usg=AOvVaw0Ddf__yVIUe0laa-JjEit-&ampcf=1
28 Views

how to qualify jee mains in three months?

manasa Student Expert 21st Sep, 2019

Hello Singh


1. Break significant ideas


2. Allude to JEE Principle best books


3. Realize the paper design


4. Time the executives


5. Test taking procedure


6. Personalisation


1. JEE Principle Arrangement Tips – Split significant ideas


Ideas ought to be completely clear in your psyche on the off chance that you need to siphon up your JEE Primary planning systems. Concentrate essential and significant ideas altogether. Understudies have figured out how to score checks near even 320 with only 3 months close by! On the off chance that you have 5-10 months close by, you can accomplish that score gave you are engaged and composed. One device that can enable you to get familiar with your ideas in an organized manner is the Information Tree on Embibe.


DC Pandey and HC Verma are your go-to books to construct ideas in Material science.


SK Goyal would be perfect for Maths (Variable based math). Maths is a scoring subject and on the off chance that you are alluding to this book, you can undoubtedly score around 80% here!


As per the new JEE Principle test design, the assessment will currently be directed for three papers: Paper 1 for B.Tech/B.E up-and-comers, Paper 2 for B.Arch, and Paper 3 for B. Arranging. Paper I comprises of an aggregate of 75 Numerous Decision Inquiries on Material science, Science, and Arithmetic. Paper II contains an aggregate of 77 inquiries 25 inquiries from Science, 50 inquiries from fitness test and 2 inquiries from Drawing test. While, Paper III includes an aggregate of 100 inquiries.


Contributing your time reasonably is the way to breaking any selection test. It is important to be specific and inflexible. Understudies need to discover the correct sort of study materials and spend only the perfect measure of time rehearsing every point. In addition to the fact that you are required to pursue a viable timetable, yet in addition, utilize proficient time the board in the whole procedure of readiness until composing the test, which is a noteworthy main factor.


RANKUP has the accompanying one of a kind highlights that assurance score improvement:


a) Monitors each development you make on the site and pinpoints the key zones you are lingering behind


b) Monitors the time spent by an understudy on each question and from these information, it causes the understudy to build their speed and exactness while stepping through an exam


c) Gives customized recommendations on the most proficient method to improve your test taking system, time the executives aptitudes, and question determination abilities


d) Rates how much exertion you are placing into your planning


e) Encourages you to assemble your stamina to sit for extended periods of time to step through an exam without getting depleted.


All the best prepare well

7 Views

HII i am studying in mahrashtra hsc board so i want know which will select in education type

Devraj choudhary Student Expert 21st Sep, 2019

Hii

Since you are students of Maharashtra board, so you should choose the Maharashtra board option as the board for class 12.

Hope it helps

22 Views

sir cyber cafe have sended my best of five marks of class 10 and substitutd hindi marks during jee application is there is any problem

Sonali Sahu Student Expert 21st Sep, 2019

Hello,

In Jee Application Form there is no place to enter subject marks. There are 9 columns stating:-

  • Qualification
  • Pass Status
  • qualifying Exam
  • Place of schooling
  • Type of school/College
  • school board
  • Year of passing/appearing
  • result mode
  • Mark Details:-
  1. Obtained marks
  2. Total marks
  3. percentage

Here is no place to input marks. For more information and clarification you can visit the site:- https://engineering.careers360.com/articles/jee-main-application-form

Here every step of form filling is written with full description.

Hope it helps!

News and Articles

View More
The question have been saved in answer later, you can access it from your profile anytime. Access now

Download the Careers360 App on your Android phone

Regular exam updates, QnA, Predictors, College Applications & E-books now on your Mobile

Careers360 App
150M+ Students
24,000+ Colleges
500+ Exams
1500+ E-books