JEE Main 2026 - City Intimation Slip, Admit Card, Exam Date, Syllabus, Preparation Tips, Cutoff

Examination Name

Joint Entrance Examination Main (JEE Main)

Conducting Body

National Testing Agency (NTA)

Purpose of Examination

Admission into NITs, IIITs, and CFTIs and a qualifying test for JEE Advanced

Category

Undergraduate (UG) Exam

Level of Exam

National Level

Number of Sessions

2

NTA JEE Main 2026 Exam Mode

Paper-1: Computer-based test

Paper-2:

• Mathematics and Aptitude - computer-based test
• Planning section (B.Plan) - computer-based test
• Drawing test (B.Arch) - pen-and-paper-based exam

Mode of Application

Online

Official Web Portal

jeemain.nta.nic.in, jeemain.nta.ac.in and nta.ac.in

28 , 2026
Paper 2 - January 29, 2026

General

For Males- Rs 1000

For Females- Rs 800

For Males- Rs 2000

For Females-Rs 1600

EWS/OBC-NCL

For Males- Rs 900

For Females- Rs 800

For Males- Rs 2000
For Females-Rs 1600

SC/ST/PWD/Transgender

For All- Rs 500

For All- Rs 1000

General

For Males- Rs 5000

For Females- Rs 4000

For Males- Rs 10000

For Females- Rs 8000

EWS/OBC-NCL

For Males - Rs. 4500

For Females- Rs. 4000

For All- Rs 5000

SC/ST/PWD/Transgender

M / F- Rs 2500

Transgender - Rs. 3000

For All- Rs 5000

JEE Main 2026 registration date session 2

February 1, 2026

JEE Main 2026 NTA registration last date

February 25, 2026

Session 2: February 27, 2026

JEE Main admit card release date

March 2026 (3-4 days before the exam)

JEE Main 2026 Session 2 Exam Date

April 2 to 09, 2026

Result Declaration Date

By 20 April, 2026

Release of JEE Main 2026 official notification

October 31, 2025

JEE Mains registration date 2026

October 31, 2025

JEE Mains 2026 registration last date session 1

November 27, 2025 (till 9 PM)

December 1, 2025

December 2, 2025

Release date for JEE Main exam admit card

January 25, 2026 ( for Jan 28 & 29 exam )

January 17, 2026, (For Jan 21 to 24 exams)

JEE Main 2026 Session 1 Exam Date

January 21, 22, 23, 24, 28 and 29, 2026

January 23 exam has been postponed for the West Bengal exam centres

JEE exam result release date

By February 12, 2026 February 16, 2026

Units and Measurement

Units of Measurements, System of Units, S I Units, fundamental and derived units, least count, significant figures, Errors in measurements, Dimensions of Physics quantities, dimensional analysis, and its applications

Kinematics

The frame of reference, motion in a straight line, Position- time graph, speed and velocity; Uniform and non-uniform motion, average speed and instantaneous velocity, uniformly accelerated motion, velocity-time, position-time graph, relations for uniformly accelerated motion. Relative Velocity, Motion in A Plane, Projectile Motion, Uniform Circular Motion.

Laws Of Motion

Force and inertia, Newton’s First Law of motion; Momentum, Newton’s Second Law of Motion, Impulses; Newton’s Third Law of motion. Law of conservation of linear momentum and its applications. Equilibrium of concurrent forces. Static and Kinetic friction, laws of friction, rolling friction. Dynamics of uniform circular motion: centripetal force and its applications: vehicle on a level circular road, vehicle on a banked road.

Work, Energy, And Power

Work done by a constant force and a variable force; kinetic and potential energies, work-energy theorem, power. The potential energy of spring conservation of mechanical energy, conservative and nonconservative forces; motion in a vertical circle: Elastic and inelastic collisions in one and two dimensions.

Rotational Motion

Centre of the mass of a two-particle system, Centre of the mass of a rigid body; Basic concepts of rotational motion; moment of a force; torque, angular momentum, conservation of angular momentum and its applications; The moment of inertia, the radius of gyration, values of moments of inertia for simple geometrical objects, parallel and perpendicular axes theorems, and their applications. Equilibrium of rigid bodies, rigid body rotation and equations of rotational motion, comparison of linear and rotational motions.

Gravitation

The universal law of gravitation. Acceleration due to gravity and its variation with altitude and depth. Kepler’s law of planetary motion. Gravitational potential energy; gravitational potential. Escape velocity, Motion of a satellite, orbital velocity, time period, and energy of satellite.

Properties Of Liquids and Solid

Elastic behaviour, Stress-strain relationship, Hooke's Law. Young's modulus, bulk modulus, and modulus of rigidity. Pressure due to a fluid column; Pascal's law and its applications. Effect of gravity on fluid pressure. Viscosity. Stokes' law. terminal velocity, streamline, and turbulent flow.critical velocity. Bernoulli's principle and its applications. Surface energy and surface tension, angle of contact, excess of pressure across a curved surface, application of surface tension - drops, bubbles, and capillary rise. Heat, temperature, thermal expansion; specific heat capacity, calorimetry; change of state, latent heat. Heat transfer conduction, convection, and radiation.

Thermodynamics

Thermal equilibrium, zeroth law of thermodynamics, the concept of temperature. Heat, work, and internal energy. The first law of thermodynamics, isothermal and adiabatic processes. The second law of thermodynamics: reversible and irreversible processes.

Kinetic Theory Of Gases

Equation of state of a perfect gas, work done on compressing a gas, Kinetic theory of gases - assumptions, the concept of pressure. Kinetic interpretation of temperature: RMS speed of gas molecules: Degrees of freedom. Law of equipartition of energy and applications to specific heat capacities of gases; Mean free path. Avogadro's number.

Oscillations & Waves

Oscillations and periodic motion – time period, frequency, displacement as a function of time. Periodic functions. Simple harmonic motion (S.H.M.) and its equation; phase: oscillations of a spring -restoring force and force constant: energy in S.H.M. - Kinetic and potential energies; Simple pendulum - derivation of expression for its time period: Wave motion. Longitudinal and transverse waves, speed of the travelling wave. Displacement relation for a progressive wave. Principle of superposition of waves, reflection of waves. Standing waves in strings and organ pipes, fundamental mode, and harmonics. Beats.

Electrostatic

Electric Charges And Fields: Conservation of charge. Coulomb's law forces between two point charges, forces between multiple charges: superposition principle and continuous charge distribution. Electric field: Electric field due to a point charge, Electric field lines. Electric dipole, Electric field due to a dipole. Torque on a dipole in a uniform electric field.

Electric flux. Gauss's law and its applications to find field due to infinitely long uniformly charged straight wire uniformly charged infinite plane sheet, and uniformly charged thin spherical shell. Electric potential and its calculation for a point charge, electric dipole and system of charges; potential difference, Equipotential surfaces, Electric Potential And Capacitance, energy of a system of two point charges and electric dipole in an electrostatic field. Conductors and insulators. Dielectrics and electric polarization, capacitors and capacitances, the combination of capacitors in series and parallel, and capacitance of a parallel plate capacitor with and without dielectric medium between the plates. Energy stored in a capacitor.

Current Electricity

Electric current. Drift velocity, mobility, and their relation with electric current. Ohm's law. Electrical resistance. V-l characteristics of Ohmic and non-ohmic conductors. Electrical energy and

power. Electrical resistivity and conductivity. Series and parallel combinations of resistors; Temperature dependence of resistance. Internal resistance, potential difference, and emf of a cell, a combination of cells in series and parallel. Kirchhoff’s laws and their applications. Wheatstone bridge. Metre Bridge.

Magnetic Effects of Current & Magnetism

Biot - Savart law and its application to the current carrying circular loop. Ampere's law and its applications to infinitely long current carrying straight wire and solenoid.

Moving Charges And Magnetism- Force on a moving charge in uniform magnetic and electric fields. Force on a current-carrying conductor in a uniform magnetic field. The force between two parallel currents carrying conductors-definition of ampere.

Torque experienced by a current loop in a uniform magnetic field: Moving coil galvanometer, its sensitivity, and conversion to ammeter and voltmeter. Current loop as a magnetic dipole and its magnetic dipole moment. Bar magnet as an equivalent solenoid, magnetic field lines; Magnetic field due to a magnetic dipole (bar magnet) along its axis and perpendicular to its axis. Torque on a magnetic dipole in a uniform magnetic field. Para-, dia- and ferromagnetic substances with examples, the effect of temperature on magnetic properties

Electromagnetic Induction and Alternating Current

Electromagnetic induction: Faraday's law. Induced emf and current: Lenz’s Law, Eddy currents. Self and mutual inductance. Alternating currents, peak and RMS value of alternating current/ voltage: reactance and impedance: LCR series circuit, resonance: power in AC circuits, wattless current. AC generator and transformer.

Electromagnetic Waves

Displacement current. Electromagnetic waves and their characteristics, Transverse nature of electromagnetic waves, Electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet. X-rays. Gamma rays), Applications of e.m. waves

Optics

Reflection of light, spherical mirrors, mirror formula. Refraction of light at plane and spherical surfaces, thin lens formula, and lens maker formula. Total internal reflection and its applications. Magnification. Power of a Lens. Combination of thin lenses in contact. Refraction of light through a prism. Microscope and Astronomical Telescope (reflecting and refracting ) and their magnifying powers.

Wave optics: wavefront and Huygens' principle. Laws of reflection and refraction using Huygens principle. Interference, Young's double-slit experiment, and expression for fringe width, coherent sources, and sustained interference of light. Diffraction due to a single slit, width of the central maximum. Polarisation, plane-polarised light: Brewster's law, uses of planepolarized light and Polaroid.

Dual Nature Of Matter and Radiation

Dual nature of radiation. Photoelectric effect. Hertz and Lenard's observations; Einstein's photoelectric equation: particle nature of light. Matter waves-wave nature of particle, de Broglie relation.

Atoms and Nuclei

Alpha-particle scattering experiment; Rutherford's model of atom; Bohr model, energy levels, hydrogen spectrum. Composition and size of nucleus, atomic masses, Mass-energy relation, mass defect; binding energy per nucleon and its variation with mass number, nuclear fission, and fusion

Semiconductor Electronic Materials Device

Semiconductors; semiconductor diode: I-V characteristics in forward and reverse bias; diode as a rectifier; I-V characteristics of LED. the photodiode, solar cell, and Zener diode; Zener diode as a voltage regulator. Logic gates (OR. AND. NOT. NAND and NOR).

Experimental Skills

Familiarity with the basic approach and observations of the experiments and activities:

• Vernier calipers -its use to measure the internal and external diameter and depth of a vessel.

• Screw gauge-its use to determine the thickness/ diameter of thin sheet/wire.

• Simple Pendulum-dissipation of energy by plotting a graph between the square of amplitude and time.

• Metre Scale - the mass of a given object by the principle of moments.

• Young's modulus of elasticity of the material of a metallic wire.

• Surf ace tension of water by capillary rise and effect of detergent

• Co-efficient of Viscosity of a given viscous liquid by measuring the terminal velocity of a given spherical body

• Speed of sound in air at room temperature using a resonance tube

• Specific heat capacity of a given (i) solid and (ii) liquid by method of mixtures.

• The resistivity of the material of a given wire using a metre bridge

• The resistance of a given wire using Ohm's law.

• Resistance and figure of merit of a galvanometer by half deflection method.

• The focal length of; (i) Convex mirror (ii) Concave mirror, and (ii) Convex lens, using the parallax method.

• The plot of the angle of deviation vs angle of incidence for a triangular prism.

• The refractive index of a glass slab using a travelling microscope.

• Characteristic curves of a p-n junction diode in forward and reverse bias.

• Characteristic curves of a Zener diode and finding reverse breakdown voltage.

• Identification of Diode. LED, Resistor. A capacitor from a mixed collection of such items.

Some Basic Concepts In Chemistry

Matter and its nature, Dalton's Atomic Theory: Concept of atom, molecule, element, and compound, Laws of Chemical Combination, Atomic and molecular masses, Mole Concept, molar mass, percentage composition, empirical and molecular formulae: Chemical equations and stoichiometry

Atomic Structure

Nature of electromagnetic radiation, photoelectric effect; Spectrum of the hydrogen atom. Bohr model of a hydrogen atom - its postulates, derivation of the relations for the energy of the electron and radii of the different orbits, limitations of Bohr's model; Dual nature of matter, de Broglie's relationship. Heisenberg uncertainty principle. Elementary ideas of quantum mechanics, quantum mechanics, the quantum mechanical model of the atom, and its important features. Concept of atomic orbitals as one-electron wave functions: Variation of and 2 with r for 1s and 2s orbitals; various quantum numbers (principal, angular momentum, and magnetic quantum numbers) and their significance; shapes of s, p, and d - orbitals, electron spin, and spin quantum number: Rules for filling electrons in orbitals – Aufbau principle. Pauli's exclusion principle and Hund's rule, electronic configuration of elements, and extra stability of half-filled and completely filled orbitals.

Chemical Bonding And Molecular Structure

Kossel-Lewis approach to chemical bond formation, the concept of ionic and covalent bonds. Ionic Bonding: Formation of ionic bonds, factors affecting the formation of ionic bonds; calculation of lattice enthalpy. Covalent Bonding: Concept of electronegativity. Fajan’s rule, dipole moment: Valence Shell Electron Pair Repulsion (VSEPR ) theory and shapes of simple molecules. Quantum mechanical approach to covalent bonding: Valence Bond Theory (VBT) - its important features, the concept of hybridization involving s, p, and d orbitals; Resonance. Molecular Orbital Theory - Its important features. LCAOs, types of molecular orbitals (bonding, antibonding), sigma and pi-bonds, molecular orbital electronic configurations of homonuclear diatomic molecules, the concept of bond order, bond length, and bond energy. Elementary idea of metallic bonding. Hydrogen bonding and its applications.

Chemical Thermodynamic

Fundamentals of thermodynamics: System and surroundings, extensive and intensive properties, state functions, Entropy, types of processes. The first law of thermodynamics - Concept of work, heat internal energy and enthalpy, heat capacity, molar heat capacity; Hess’s law of constant heat summation; Enthalpies of bond dissociation, combustion, formation, atomization, sublimation, phase transition, hydration, ionization, and solution. The second law of thermodynamics - Spontaneity of processes; S of the universe and G of the system as criteria for spontaneity. G (Standard Gibbs energy change) and equilibrium constant.

Redox Reactions And Electrochemistry

Electronic concepts of oxidation and reduction, redox reactions, oxidation number, rules for assigning oxidation number, and balancing of redox reactions. Electrolytic and metallic conduction, conductance in electrolytic solutions, molar conductivities and their variation with concentration: Kohlrausch’s law and its applications. Electrochemical cells - Electrolytic and Galvanic cells, different types of electrodes, electrode potentials including standard electrode potential, half-cell and cell reactions, emf of a Galvanic cell and its measurement: Nernst equation and its applications; Relationship between cell potential and Gibbs' energy change: Dry cell and lead accumulator; Fuel cells.

Chemical Kinetics

Rate of a chemical reaction, factors affecting the rate of reactions: concentration, temperature, pressure, and catalyst; elementary and complex reactions, order and molecularity of reactions, rate law, rate constant and its units, differential and integral forms of zero and first-order reactions, their characteristics and half-lives, the effect of temperature on the rate of reactions, Arrhenius theory, activation energy and its calculation, collision theory of bimolecular gaseous reactions (no derivation).

Solutions

Different methods for expressing the concentration of solution - molality, molarity, mole fraction, percentage (by volume and mass both), the vapour pressure of solutions and Raoult's Law - Ideal and non-ideal solutions, vapour pressure - composition, plots for ideal and nonideal solutions; Colligative properties of dilute solutions - a relative lowering of vapour pressure, depression of freezing point, the elevation of boiling point and osmotic pressure; Determination of molecular mass using colligative properties; Abnormal value of molar mass, Van’t Hoff factor and its significance.

Equilibrium

Equilibria involving physical processes: Solid-liquid, liquid-gas - gas and solid-gas equilibria, Henry's law. General characteristics of equilibrium involving physical processes. Equilibrium involving chemical processes: Law of chemical equilibrium, equilibrium constants (Kp and Kc) and their significance, factors affecting equilibrium concentration, pressure, temperature, the effect of catalyst; Le Chatelier’s principle. Ionic equilibrium: Weak and strong electrolytes, ionization of electrolytes, various concepts of acids and bases (Arrhenius. Bronsted - Lowry and Lewis) and their ionization, acid-base equilibria (including multistage ionization) and ionization constants, ionization of water. pH scale, common ion effect, hydrolysis of salts and pH of their solutions, the solubility of sparingly soluble salts and solubility products, and buffer solutions.

Classification of Elements and Periodicity in Properties

Modem periodic law and present form of the periodic table, s, p. d and f block elements, periodic trends in properties of elements atomic and ionic radii, ionization enthalpy, electron gain enthalpy, valence, oxidation states, and chemical reactivity.

P- Block Elements

Group -13 to Group 18 Elements

General Introduction: Electronic configuration and general trends in physical and chemical properties of elements across the periods and down the groups; unique behaviour of the first element in each group.

d - and f- Block Elements

Transition Elements General introduction, electronic configuration, occurrence and characteristics, general trends in properties of the first-row transition elements - physical properties, ionization enthalpy, oxidation states, atomic radii, colour, catalytic behaviour, magnetic properties, complex formation, interstitial compounds, alloy formation; Preparation, properties, and uses of K2Cr2O7, and KMnO4. Inner Transition Elements Lanthanoids - Electronic configuration, oxidation states, and lanthanoid contraction. Actinoids - Electronic configuration and oxidation states.

Co-ordination Compounds

Introduction to coordination compounds. Werner's theory; ligands, coordination number, denticity. chelation; IUPAC nomenclature of mononuclear co-ordination compounds, isomerism; Bonding-Valence bond approach and basic ideas of Crystal field theory, colour and magnetic properties; Importance of co-ordination compounds (in qualitative analysis, extraction of metals, and in biological systems).

Purification And Characterisation Of Organic Compounds

Purification - Crystallization, sublimation, distillation, differential extraction, and chromatography - principles and their applications. Qualitative analysis - Detection of nitrogen, sulphur, phosphorus, and halogens.

Quantitative analysis (basic principles only) - Estimation of carbon, hydrogen, nitrogen, halogens, sulphur, and phosphorus. Calculations of empirical formulae and molecular formulae: Numerical problems in organic quantitative analysis.

Some Basic Principles Of Organic Chemistry

Tetravalency of carbon: Shapes of simple molecules - hybridization (s and p): Classification of organic compounds based on functional groups: and those containing halogens, oxygen, nitrogen, and sulphur; Homologous series: Isomerism - structural and stereoisomers. Nomenclature (Trivial and IUPAC) Covalent bond fission - Homolytic and heterolytic: free radicals, carbocations, and carbanions; stability of carbocations and free radicals, electrophiles, and nucleophiles. Electronic displacement in a covalent bond - Inductive effect, electromeric effect, resonance, and hyperconjugation. Common types of organic reactions - Substitution, addition, elimination, and rearrangement.

Hydrocarbons

Classification, isomerism, IUPAC nomenclature, general methods of preparation, properties, and reactions. Alkanes - Conformations: Sawhorse and Newman projections (of ethane): Mechanism of halogenation of alkanes. Alkenes - Geometrical isomerism: Mechanism of electrophilic addition: addition of hydrogen, halogens, water, hydrogen halides (Markownikoffs and peroxide effect): Ozonolysis and polymerization. Alkynes - Acidic character: Addition of hydrogen, halogens, water, and hydrogen halides: Polymerization. Aromatic hydrocarbons - Nomenclature, benzene - structure and aromaticity: Mechanism of electrophilic substitution: halogenation, nitration. Friedel-Craft's alkylation and acylation, directive influence of the functional group in monosubstituted benzene.

Organic Compounds Containing Halogens

General methods of preparation, properties, and reactions; Nature of C-X bond; Mechanisms of substitution reactions. Uses; Environmental effects of chloroform, iodoform freons, and DDT

Organic Compounds Containing Oxygen

Alcohols: Identification of primary, secondary, and tertiary alcohols: mechanism of dehydration. Phenols: Acidic nature, electrophilic substitution reactions: halogenation. nitration and sulphonation. Reimer - Tiemann reaction. Ethers: Structure. Aldehyde and Ketones: Nature of carbonyl group; Nucleophilic addition to >C=O group, relative reactivities of aldehydes and ketones; Important reactions such as - Nucleophilic addition reactions (addition of HCN. NH3, and its derivatives), Grignard reagent; oxidation: reduction (Wolf Kishner and Clemmensen); the acidity of-hydrogen. aldol condensation, Cannizzaro reaction. Haloform reaction, Chemical tests to distinguish between aldehydes and Ketones. Carboxylic Acids Acidic strength and factors affecting it,

Organic Compounds Containing Nitrogen

General methods of preparation. Properties, reactions, and uses. Amines: Nomenclature, classification structure, basic character, and identification of primary, secondary, and tertiary amines and their basic character. Diazonium Salts: Importance in synthetic organic chemistry.

Biomolecules

General introduction and importance of biomolecules. Carbohydrates - Classification; aldoses and ketoses: monosaccharides (glucose and fructose) and constituent monosaccharides of oligosaccharides (sucrose, lactose, and maltose). Proteins - Elementary Idea of α-amino acids, peptide bond, polypeptides. Proteins: primary, secondary, tertiary, and quaternary structure (qualitative idea only), denaturation of proteins, enzymes. Vitamins– Classification and functions. Nucleic Acids – Chemical constitution of DNA and RNA. Biological functions of nucleic acids. Hormones (General introduction)

Principles Related To Practical Chemistry

Detection of extra elements (Nitrogen, Sulphur, halogens) in organic compounds; Detection of the following functional groups; hydroxyl (alcoholic and phenolic), carbonyl (aldehyde and ketones) carboxyl, and amino groups in organic compounds. • The chemistry involved in the preparation of the following: Inorganic compounds; Mohr’s salt, potash alum.Organic compounds: Acetanilide, p-nitro acetanilide, aniline yellow, iodoform. • The chemistry involved in the titrimetric exercises – Acids, bases, and the use of indicators, oxalic-acid vs KMnO4, Mohr’s salt vs KMnO4 • Chemical principles involved in the qualitative salt analysis: Cations – Pb2+, Cu2+, Al3+, Fe3+, Zn2+, Ni2+, Ca2+, Ba2+, Mg2, NH+4

Anions- CO2−3, S 2- ,SO2−4, NO 3- , NO2- , Cl- , Br- , I- ( Insoluble salts excluded). Chemical principles involved in the following experiments: 1. Enthalpy of solution of CuSO4 2. Enthalpy of neutralization of strong acid and strong base. 3. Preparation of lyophilic and lyophobic sols. 4. Kinetic study of the reaction of iodide ions with hydrogen peroxide at room temperature.

Complex Numbers And Quadratic Equations

Complex numbers as ordered pairs of reals, Representation of complex numbers in the form a + ib and their representation in a plane, Argand diagram, algebra of complex number, modulus, and argument (or amplitude) of a complex number, Quadratic equations in real and complex number system and their solutions Relations between roots and co-efficient, nature of roots, the formation of quadratic equations with given roots.

Matrices and Determinants

Matrices, algebra of matrices, type of matrices, determinants, and matrices of order two and three, evaluation of determinants, area of triangles using determinants, Adjoint, and evaluation of inverse of a square matrix using determinants and, Test of consistency and solution of simultaneous linear equations in two or three variables using matrices.

Sets and Relations And Functions

Sets and their representation: Union, intersection, and complement of sets and their algebraic properties; Power set; Relation, Type of relations, equivalence relations, functions; one-one, into and onto functions, the composition of functions

Permutations And Combinations

The fundamental principle of counting, permutation as an arrangement and combination as section, Meaning of P (n,r) and C (n,r), simple applications.

Binomial Theorem

Binomial theorem for a positive integral index, general term and middle term, and simple applications.

Sequence And Series

Arithmetic and Geometric progressions, insertion of arithmetic, geometric means between two given numbers, Relation between A.M and G.M.

Limits And Derivatives and Continuity And Differentiability

Real–valued functions, algebra of functions, polynomials, rational, trigonometric, logarithmic, and exponential functions, inverse function. Graphs of simple functions. Limits, continuity, and differentiability. Differentiation of the sum, difference, product, and quotient of two functions. Differentiation of trigonometric, inverse trigonometric, logarithmic, exponential, composite, and implicit functions; derivatives of order up to two, Applications of derivatives: Rate of change of quantities, monotonic-Increasing and decreasing functions, Maxima and minima of functions of one variable,

Integrals

Integral as an anti-derivative, Fundamental integral involving algebraic, trigonometric, exponential, and logarithmic functions. Integrations by substitution, by parts, and by partial functions. Integration using trigonometric identities.

The fundamental theorem of calculus, properties of definite integrals. Evaluation of definite integrals, determining areas of the regions bounded by simple curves in standard form

Differential Equations

Ordinary differential equations, their order, and degree, the solution of differential equation by the method of separation of variables, solution of a homogeneous and linear differential equation of the type

Three- Dimensional Geometry

Coordinates of a point in space, the distance between two points, section formula, directions ratios, and direction cosines, and the angle between two intersecting lines. Skew lines, the shortest distance between them, and its equation. Equations of a line

Trigonometric Functions

Inverse Trigonometric Functions

Statistics And Probability

Measures of discretion; calculation of mean, median, mode of grouped and ungrouped data calculation of standard deviation, variance, and mean deviation for grouped and ungrouped data.

Probability: Probability of an event, addition and multiplication theorems of probability, Baye's theorem, probability distribution of a random variate

Vector Algebra

Vectors and scalars, the addition of vectors, components of a vector in two dimensions and three-dimensional space, scalar and vector products.

CO-ORDINATE GEOMETRY

Cartesian system of rectangular coordinates in a plane, distance formula, sections formula, locus, and its equation, the slope of a line, parallel and perpendicular lines, intercepts of a line on the co-ordinate axis.

Straight line- Various forms of equations of a line, intersection of lines, angles between two lines, conditions for concurrence of three lines, the distance of a point form a line, co-ordinate of the centroid, orthocentre, and circumcentre of a triangle,

Circle, conic sectio- A standard form of equations of a circle, the general form of the equation of a circle, its radius and central, equation of a circle when the endpoints of a diameter are given, points of intersection of a line and a circle with the centre at the origin and sections of conics, equations of conic sections (parabola, ellipse, and hyperbola) in standard forms,

• Complex Numbers And Quadratic Equations

• Matrices

• Determinants

• Sets

• Relations And Functions

• Trigonometric Functions

• Inverse Trigonometric Functions

• Limits And Derivatives

• Continuity And Differentiability

• Application Of Derivatives

• Integrals

• Application Of Integrals

• Permutations And Combinations

• Binomial Theorem

• Sequence And Series

• Differential Equations

• Three- Dimensional Geometry

• Vector Algebra

• Statistics And Probability

• Awareness of Persons, Buildings and Material

• Three-Dimensional Perception

• Sketching of Scenes and Activities from the memory of urbanscape

• General Awareness

• Social Sciences

• Thinking Skills

Mode of exam

Online (Computer-Based Test)

Subjects

Physics, Chemistry and Mathematics

Type of questions

Multiple Choice Questions (MCQ)

Numerical Value Answer (NAV) type questions

Total number of questions

75 Questions

Exam Duration

3 hours

Subject-wise number of questions

• Physics- 20 MCQ and 5 Numerical Value Questions

• Chemistry- 20 MCQ and 5 Numerical Value Questions

• Mathematics- 20 MCQ and 5 Numerical Value Questions

JEE Marking scheme

• +4 Mark for each right answer

• -1 Mark for an incorrect answer

JEE Mains Total Marks

300

Language of paper

Assamese, Bengali, Marathi, Odia, Kannada, Malayalam, Punjabi, Tamil, Hindi, English, Telugu, and Urdu and Gujarati

Mode of exam

Online (Computer-based test) except drawing section

Subjects covered

Mathematics, General Aptitude, Drawing

Type of questions

• Multiple choice questions (MCQ)

• Numerical value answer (NAV) type questions

• Drawing question

Total number of questions

75+2 (drawing)

Total Marks

300

Subejct-wise number of questions

• Mathematics- 20 MCQ and 5 NAV

• General Aptitude- 50 MCQ

• Drawing- 2 questions on drawing

Test Duration

3 hours

Marking scheme

• +4 Mark for each right answer

• -1 Mark for an incorrect answer

Language of paper

Assamese, Bengali, Marathi, Odia, Kannada, Malayalam, Punjabi, Tamil, Hindi, English, Telugu, and Urdu and Gujarati

Mode of exam

Online (Computer-based test)

Subjects covered

Mathematics, General Aptitude and Planning

Total number of questions

105

Total Marks

300

Subject-wise number of questions

• Mathematics- 30

• General Aptitude- 50

• Planning- 25

Total duration of exam

3 hours

Type of questions

Multiple choice questions (MCQ) and Numerical Value Questions (NAV) in Mathematics

Multiple choice questions (MCQ) in General Aptitude and Planning

Marking scheme

• +4 Mark for each right answer

• -1 Mark for an incorrect answer

Language of paper

Assamese, Bengali, Marathi, Odia, Kannada, Malayalam, Punjabi, Tamil, Hindi, English, Telugu, and Urdu and Gujarati

286- 292

19-12

280-284

42-23

268- 279

106-64

250- 267

524-108

231-249

1385-546

215-230

2798-1421

200-214

4667-2863

189-199

6664- 4830

175-188

10746-7152

160-174

16163-11018

149-159

21145-16495

132-148

32826-22238

120-131

43174-33636

110-119

54293-44115

102-109

65758-55269

95-101

76260-66999

89-94

87219-78111

79-88

109329-90144

62-87

169542-92303

41-61

326517-173239

1-40

1025009-334080